Hand-held motor-operated electric tools - Safety - Part 2-5: Particular requirements for circular saws

Deals with the safety of hand-held motor-operated or magnetically driven electric tools, specific requirements for circular saws. The rated voltage being not more than 250 V for single-phase a.c. or d.c., and 440 V for three-phase a.c.tools. This standard does not apply to saws used with abrasive wheels.

Handgeführte motorbetriebene Elektrowerkzeuge - Sicherheit - Teil 2-5: Besondere Anforderungen für Kreissägen

Outils électroportatifs à moteur - Sécurité - Partie 2-5: Règles particulières pour les scies circulaires

Električna ročna orodja - Varnost - 2-5. del: Posebne zahteve za krožne žage (IEC 60745-2-5:2003; spremenjen)

General Information

Status
Withdrawn
Publication Date
19-Jun-2003
Withdrawal Date
31-Mar-2006
Current Stage
9960 - Withdrawal effective - Withdrawal
Start Date
01-Nov-2009
Completion Date
01-Nov-2009

Relations

Buy Standard

Standard
EN 60745-2-5:2003
English language
32 pages
sale 10% off
Preview
sale 10% off
Preview
e-Library read for
1 day

Standards Content (Sample)


SLOVENSKI STANDARD
01-december-2003
1DGRPHãþD
SIST EN 50144-2-5:2000
SIST EN 50260-2-5:2002
(OHNWULþQDURþQDRURGMD9DUQRVWGHO3RVHEQH]DKWHYH]DNURåQHåDJH ,(&
VSUHPHQMHQ
Hand-held motor-operated electric tools - Safety -- Part 2-5: Particular requirements for
circular saws
Handgeführte motorbetriebene Elektrowerkzeuge - Sicherheit -- Teil 2-5: Besondere
Anforderungen für Kreissägen
Outils électroportatifs à moteur - Sécurité -- Partie 2-5: Règles particulières pour les
scies circulaires
Ta slovenski standard je istoveten z: EN 60745-2-5:2003
ICS:
25.080.60 Strojne žage Sawing machines
25.140.20 (OHNWULþQDRURGMD Electric tools
2003-01.Slovenski inštitut za standardizacijo. Razmnoževanje celote ali delov tega standarda ni dovoljeno.

EUROPEAN STANDARD EN 60745-2-5
NORME EUROPÉENNE
EUROPÄISCHE NORM June 2003
ICS 25.100.40 Supersedes EN 50144-2-5:1999 & EN 50260-2-5:2002

English version
Hand-held motor-operated electric tools -
Safety
Part 2-5: Particular requirements for circular saws
(IEC 60745-2-5:2003, modified)

Outils électroportatifs à moteur -  Handgeführte motorbetriebene
Sécurité Elektrowerkzeuge -
Partie 2-5: Règles particulières Sicherheit
pour les scies circulaires Teil 2-5: Besondere Anforderungen
(CEI 60745-2-5:2003, modifiée) für Kreissägen
(IEC 60745-2-5:2003, modifiziert)

This European Standard was approved by CENELEC on 2003-04-01. CENELEC members are bound to
comply with the CEN/CENELEC Internal Regulations which stipulate the conditions for giving this European
Standard the status of a national standard without any alteration.

Up-to-date lists and bibliographical references concerning such national standards may be obtained on
application to the Central Secretariat or to any CENELEC member.

This European Standard exists in three official versions (English, French, German). A version in any other
language made by translation under the responsibility of a CENELEC member into its own language and
notified to the Central Secretariat has the same status as the official versions.

CENELEC members are the national electrotechnical committees of Austria, Belgium, Czech Republic,
Denmark, Finland, France, Germany, Greece, Hungary, Iceland, Ireland, Italy, Luxembourg, Malta,
Netherlands, Norway, Portugal, Slovakia, Spain, Sweden, Switzerland and United Kingdom.

CENELEC
European Committee for Electrotechnical Standardization
Comité Européen de Normalisation Electrotechnique
Europäisches Komitee für Elektrotechnische Normung

Central Secretariat: rue de Stassart 35, B - 1050 Brussels

© 2003 CENELEC - All rights of exploitation in any form and by any means reserved worldwide for CENELEC members.

Ref. No. EN 60745-2-5:2003 E
Foreword
The text of the International Standard IEC 60745-2-5:2003, prepared by SC 61F, Safety of hand-held
motor-operated electric tools, of IEC TC 61, Safety of household and similar electrical appliances,
together with the common modifications prepared by the Technical Committee CENELEC TC 61F, Safety
of hand-held and transportable motor operated electric tools, was submitted to the formal vote and was
approved by CENELEC as EN 60745-2-5 on 2003-04-01.
This European Standard supersedes EN 50144-2-5:1999 and EN 50260-2-5:2002.
The following dates were fixed:
- latest date by which the EN has to be implemented
at national level by publication of an identical
national standard or by endorsement (dop) 2004-04-01
- latest date by which the national standards conflicting
with the EN have to be withdrawn (dow) 2006-04-01
Other standards referred to in this European standard are listed in Clause 2. Clause 2 lists the valid
edit
...

Questions, Comments and Discussion

Ask us and Technical Secretary will try to provide an answer. You can facilitate discussion about the standard in here.