EN 50144-2-5:1999
(Main)Safety of hand-held electric motor operated tools - Part 2-5: Particular requirements for circular saws and circular knives
Safety of hand-held electric motor operated tools - Part 2-5: Particular requirements for circular saws and circular knives
This clause of Part 1 is applicable except as follows: 1.1. Addition: This standard applies to all types of circular saws for cutting wood and similar materials and to circular knives. These requirements do not cover circular saws and circular knives when mounted in a support for use as fixed tools. This standard does not give requirements for the design of the tool for the reduction of the risk arising from noise and vibration.
Sicherheit handgeführter motorbetriebener Elektrowerkzeuge - Teil 2-5: Besondere Anforderungen für Kreissägen und Kreismesser
Sécurité des outils électroportatifs à moteur - Partie 2-5: Règles particulières pour les scies circulaires et les couteaux circulaires
Varnost električnih ročnih orodij - 2-5. del: Posebne zahteve za krožne žage in krožne nože
General Information
- Status
- Withdrawn
- Publication Date
- 28-Nov-1999
- Withdrawal Date
- 30-Nov-2001
- Technical Committee
- CLC/TC 116 - Safety of hand-held motor-operated electric tools
- Drafting Committee
- IEC/TC 116 - Safety of hand-held motor-operated electric tools
- Parallel Committee
- IEC/SC 61F - IEC_SC_61F --> TC 116
- Current Stage
- 9960 - Withdrawal effective - Withdrawal
- Start Date
- 01-Apr-2006
- Completion Date
- 01-Apr-2006
- Directive
- 98/37/EC - Machinery
- Mandate
- M/083 - Machinery
Relations
- Effective Date
- 29-Jan-2023
- Effective Date
- 29-Jan-2023
Get Certified
Connect with accredited certification bodies for this standard
National Aerospace and Defense Contractors Accreditation Program (NADCAP)
Global cooperative program for special process quality in aerospace.
CARES (UK Certification Authority for Reinforcing Steels)
UK certification for reinforcing steels and construction.
DVS-ZERT GmbH
German welding certification society.
Sponsored listings
Frequently Asked Questions
EN 50144-2-5:1999 is a standard published by CLC. Its full title is "Safety of hand-held electric motor operated tools - Part 2-5: Particular requirements for circular saws and circular knives". This standard covers: This clause of Part 1 is applicable except as follows: 1.1. Addition: This standard applies to all types of circular saws for cutting wood and similar materials and to circular knives. These requirements do not cover circular saws and circular knives when mounted in a support for use as fixed tools. This standard does not give requirements for the design of the tool for the reduction of the risk arising from noise and vibration.
This clause of Part 1 is applicable except as follows: 1.1. Addition: This standard applies to all types of circular saws for cutting wood and similar materials and to circular knives. These requirements do not cover circular saws and circular knives when mounted in a support for use as fixed tools. This standard does not give requirements for the design of the tool for the reduction of the risk arising from noise and vibration.
EN 50144-2-5:1999 is classified under the following ICS (International Classification for Standards) categories: 25.080.60 - Sawing machines; 25.140.20 - Electric tools. The ICS classification helps identify the subject area and facilitates finding related standards.
EN 50144-2-5:1999 has the following relationships with other standards: It is inter standard links to EN 50144-2-5:1996, EN 60745-2-5:2003. Understanding these relationships helps ensure you are using the most current and applicable version of the standard.
EN 50144-2-5:1999 is associated with the following European legislation: EU Directives/Regulations: 98/37/EC; Standardization Mandates: M/083. When a standard is cited in the Official Journal of the European Union, products manufactured in conformity with it benefit from a presumption of conformity with the essential requirements of the corresponding EU directive or regulation.
EN 50144-2-5:1999 is available in PDF format for immediate download after purchase. The document can be added to your cart and obtained through the secure checkout process. Digital delivery ensures instant access to the complete standard document.
Standards Content (Sample)
SLOVENSKI STANDARD
01-september-2000
1DGRPHãþD
SIST EN 50144-2-5:1999
9DUQRVWHOHNWULþQLKURþQLKRURGLMGHO 3RVHEQH]DKWHYH]DNURåQHåDJHLQ
NURåQHQRåH
Safety of hand-held electric motor operated tools -- Part 2-5: Particular requirements for
circular saws and circular knives
Sicherheit handgeführter motorbetriebener Elektrowerkzeuge -- Teil 2-5: Besondere
Anforderungen für Kreissägen und Kreismesser
Sécurité des outils électroportatifs à moteur -- Partie 2-5: Règles particulières pour les
scies circulaires et les couteaux circulaires
Ta slovenski standard je istoveten z: EN 50144-2-5:1999
ICS:
25.080.60 Strojne žage Sawing machines
25.140.20 (OHNWULþQDRURGMD Electric tools
2003-01.Slovenski inštitut za standardizacijo. Razmnoževanje celote ali delov tega standarda ni dovoljeno.
SIS
...
Questions, Comments and Discussion
Ask us and Technical Secretary will try to provide an answer. You can facilitate discussion about the standard in here.
Loading comments...