EN 4385:2022

SLOVENSKI STANDARD
01-julij-2022
Aeronavtika - Nekovinski materiali - Splošna organizacija standardizacije -
Povezave med vrstami standardov
Aerospace series - Non-metallic materials - General organization of standardization -
Links between types of standards
Luft- und Raumfahrt - Nichtmetallische Werkstoffe - Allgemeine Gliederung der Normung
- Verknüpfung der Arten von Normen
Série aérospatiale - Matériaux non métalliques - Organisation générale de la
normalisation - Liens entre les types de normes
Ta slovenski standard je istoveten z: EN 4385:2022
ICS:
01.120 Standardizacija. Splošna Standardization. General
pravila rules
49.025.99 Drugi materiali Other materials
2003-01.Slovenski inštitut za standardizacijo. Razmnoževanje celote ali delov tega standarda ni dovoljeno.

EN 4385
EUROPEAN STANDARD
NORME EUROPÉENNE
May 2022
EUROPÄISCHE NORM
ICS 01.120; 49.025.99
English Version
Aerospace series - Non-metallic materials - General
organization of standardization - Links between types of
standards
Série aérospatiale - Matériaux non métalliques - Luft- und Raumfahrt - Nichtmetallische Werkstoffe -
Organisation générale de la normalisation - Liens entre Allgemeine Gliederung der Normung - Verknüpfung
les types de normes der Arten von Normen
This European Standard was approved by CEN on 18 November 2019.

CEN members are bound to comply with the CEN/CENELEC Internal Regulations which stipulate the conditions for giving this
European Standard the status of a national standard without any alteration. Up-to-date lists and bibliographical references
concerning such national standards may be obtained on application to the CEN-CENELEC Management Centre or to any CEN
member.
This European Standard exists in three official versions (English, French, German). A version in any other language made by
translation under the responsibility of a CEN member into its own language and notified to the CEN-CENELEC Management
Centre has the same status as the official versions.

CEN members are the national standards bodies of Austria, Belgium, Bulgaria, Croatia, Cyprus, Czech Republic, Denmark, Estonia,
Finland, France, Germany, Greece, Hungary, Iceland, Ireland, Italy, Latvia, Lithuania, Luxembourg, Malta, Netherlands, Norway,
Poland, Portugal, Republic of North Macedonia, Romania, Serbia, Slovakia, Slovenia, Spain, Sweden, Switzerland, Turkey and
United Kingdom.
EUROPEAN COMMITTEE FOR STANDARDIZATION
COMITÉ EUROPÉEN DE NORMALISATION

EUROPÄISCHES KOMITEE FÜR NORMUNG

CEN-CENELEC Management Centre: Rue de la Science 23, B-1040 Brussels
© 2022 CEN All rights of exploitation in any form and by any means reserved Ref. No. EN 4385:2022 E
worldwide for CEN national Members.

Contents Page
European foreword . 3
Introduction . 4
1 Scope . 5
2 Normative references . 5
3 Terms and definitions . 5
4 Description of the types of standards . 5
4.1 General standard (level 0) . 6
4.2 Basic standards (level 1) . 6
4.3 Standards specifying rules (level 2) . 6
4.4 Semi-finished product definition standards (level 3) . 6
4.5 Supplementary standards for quality assurance/product definition (level 4) . 7
4.6 Technical reports . 7
5 Links between types of standard and use . 7
6 Overview . 7
Annex A (normative) Overview of non-metallic materials standards organization. 8
Table A.1 . 8

European foreword
This document (EN 4385:2022) has been prepared by the Aerospace and Defence Industries Association
of Europe — Standardization (ASD-STAN).
After enquiries and votes carried out in accordance with the rules of this Association, this Standard has
received the approval of the National Associations and the Official Services of the member countries of
ASD-STAN, prior to its presentation to CEN.
This European Standard shall be given the status of a national standard, either by publication of an
identical text or by endorsement, at the latest by November 2022, and conflicting national standards shall
be withdrawn at the latest by November 2022.
Attention is drawn to the possibility that some of the elements of this document may be the subject of
patent rights. CEN shall not be held responsible for identifying any or all such patent rights.
According to the CEN-CENELEC Internal Regulations, the national standards organizations of the
following countries are bound to implement this European Standard: Austria, Belgium, Bulgaria, Croatia,
Cyprus, Czech Republic, Denmark, Estonia, Finland, France, Germany, Greece, Hungary, Iceland, Ireland,
Italy, Latvia, Lithuania, Luxembourg, Malta, Netherlands, Norway, Poland, Portugal, Republic of North
Macedonia, Romania, Serbia, Slovakia, Slovenia, Spain, Sweden, Switzerland, Turkey and the United
Kingdom.
Introduction
For the purpose of standardization of non-metallic materials, ASD-STAN originally permitted the
different families of non-metallic materials to be treated in isolation to each other. Consequently, there
was no standardized approach for drafting and presentation of the different families of non-metallic
materials.
In order to introduce a coherent system, a number of standards defining the rules to be followed in
drafting and
...