01.120 - Standardization. General rules

This document provides an EETS gap analysis with the aim to identify the need for new or updated standards to provide an enhanced support of the recast of the EU EETS legislation [29], [31], [32].

This document provides guidance on addressing research and innovation (R&I) in European standardization activities and deliverables.
Secretaries and chairpersons of CEN/CENELEC Technical Bodies as well as CEN/CENELEC national members are encouraged to actively promote the application of this document.

This CEN-CENELEC Guide provides mechanisms and details the characteristics and development process of the CEN/CENELEC deliverable known as the 'CEN/CENELEC Workshop Agreement'.

This document provides guidance to standards developers on how to take account of climate change in the planning, drafting, revision and updating of ISO standards and other deliverables. It outlines a framework and general principles that standards developers can use to develop their own approach to addressing climate change on a subject-specific basis. It aims to enable standards developers to include adaptation to climate change (ACC) and climate change mitigation (CCM) considerations in their...view more

This Guide sets out the rules for the drafting and presentation of candidate harmonized European Standards (hENs) for construction products drafted in the framework of Regulation (EU) 305/2011 (Construction Products Regulation).
This Guide gives rules which are additional to the CEN-CENELEC Internal Regulations - Part 3 (based on ISO/IEC Directives, Part 2) when this is necessary because of the special provisions of harmonized product standards in the construction sector.
This Guide applies to...view more

The present document has been produced to help a Technical Body (TB) to produce a Harmonised Standard (HS) covering the conformity of radio equipment with the essential requirements in articles 3.1(b) and 3.2 of the Radio Equipment Directive (Directive 2014/53/EU [i.1]).
NOTE 1: Article 3.1(b) of Directive 2014/53/EU [i.1] states:
"Radio equipment shall be constructed so as to ensure….an adequate level of electromagnetic compatibility as set out in Directive 2014/30/EU."
NOTE 2: Article 3.2 o...view more

This document provides guidance to standards developers on how to take account of sustainability in the drafting, revision and updating of ISO standards and similar deliverables. It outlines a methodology that ISO standards developers can use to develop their own approach to addressing sustainability on a subject-specific basis.

IEC GUIDE 108:2019 defines rules for dealing with horizontal functions and horizontal publications. This Guide is to be used in conjunction with the ISO/IEC Directives and with the aspect­ specific Guides.
The fundamental concept of a horizontal publication is that it is an international publication (not a TS or a PAS) that is widely applicable and to be used by all relevant committees and that has undergone an enhanced approval process as described in this document.
In this Guide:
- the term...view more

This document provides a reference of single herbal medicines in order of their priority in the development of international standards.

This document specifies the competence, consisting of knowledge, skills and attributes, needed to perform the tasks of standards professionals. This document is applicable to all personnel involved in some aspect of standardization in companies.

This document specifies the competence, consisting of knowledge, skills and attributes, needed to perform the tasks of standards professionals. This document is applicable to all personnel involved in some aspect of standardization in an organization performing standardization activities.

This document provides recommended standardization practices that are intended to support the application of the following: — the WTO TBT Committee decision on principles for the development of international standards, guides and recommendations (G/TBT/9, 13 November 2000); — the WTO TBT Agreement's Code of Good Practice for the Preparation, Adoption and Application of Standards (Annex 3 of the 1995 WTO TBT Agreement). This document is intended to be used by the national members of ISO and IEC, ...view more

This document provides requirements and recommendations to writers of medical device standards on the inclusion of aspects related to safety in International Standards, based on well-established risk management concepts and methodology. This document is applicable to any aspect related to the safety of people, property, the environment, or a combination of these. In this document, the term "product" includes a medical device or a system consisting of one or more medical devices, possibly combine...view more

This document specifies requirements that enable an organization to design, develop and provide products, goods or services so that they can be accessed, understood and used by the widest range of users.
This document specifies requirements and recommendations that enables  an organization to extend their range of users by identifying diverse needs, characteristics, capabilities,  and preferences, by directly or indirectly involving users, and by using knowledge about accessibility in its proce...view more

This document specifies requirements that enable an organization to design, develop and provide products, goods and services so that they can be accessed, understood and used by the widest range of users, including persons with disabilities.
This document specifies requirements and recommendations that enables an organization to extend their range of users by identifying diverse needs, characteristics, capabilities, and preferences, by directly or indirectly involving users, and by using knowle...view more

This document provides general recommendations to be taken into consideration when determining the most suitable type of packaging for products intended for consumers. The functions that packaging can perform include, but are not limited to, containment, protection, handling, transport, storage, convenience, information and presentation. This document also considers the sustainable use of resources covering optimization, reuse and recovery of packaging. This document provides guidance to: — prod...view more

IEC 62386-221:2018 specifies the methodology of demand response which focuses on the curtailment of electric loads during peak demand times thus avoiding the requirement to find new sources of generation capacity. By using load shedding, the lighting system responds to the demands of the energy supply.
This document is applicable to control gear supporting the demand response functionality.

This document contains a list of currently used terminology to describe accessibility and terms
that writers of standards need when writing and designing International Standards. It is
important to standardize and define a recognized list of the terms already used and in existing
ITU Recommendations and Resolutions, along with those in the UN Convention on the Rights
of Persons with Disabilities (UNCRPD). Without such a list, there could be confusion not only
on the part of writers and impl...view more

ISO/IEC Guide 14:2018 provides guidance on the provision of information concerning products and their related services intended for consumers. It outlines general principles and recommendations for content, methods, formats and designs enabling consumers to compare and choose consumer products and their related services prior to purchase.

This Guide sets out the policy for the copyright, dissemination and sale of CEN-CENELEC Publications at all stages of their development, together with their national implementations and national products containing them, in all formats, distributed by all media and in all language versions in all territories.
This Guide establishes practices in line with competition law and with the World Trade Organization (WTO) criteria regarding dissemination of adopted standards under the openness criterion...view more