prEN ISO 9094

SLOVENSKI STANDARD
oSIST prEN ISO 9094:2010
01-marec-2010
0DODSORYLOD3RåDUQD]DãþLWD,62',6
Small craft - Fire protection (ISO/DIS 9094:2010)
Kleine Wasserfahrzeuge - Brandschutz (ISO/DIS 9094:2010)
Petits navires - Protection contre l'incendie (ISO/DIS 9094:2010)
Ta slovenski standard je istoveten z: prEN ISO 9094
ICS:
13.220.20 3RåDUQD]DãþLWD Fire protection
47.080 ýROQL Small craft
oSIST prEN ISO 9094:2010 en,fr,de
2003-01.Slovenski inštitut za standardizacijo. Razmnoževanje celote ali delov tega standarda ni dovoljeno.

oSIST prEN ISO 9094:2010
oSIST prEN ISO 9094:2010
EUROPEAN STANDARD
DRAFT
NORME EUROPÉENNE
EUROPÄISCHE NORM
January 2010
ICS 13.220.20; 47.080 Will supersede EN ISO 9094-1:2003, EN ISO 9094-
2:2002
English Version
Small craft - Fire protection (ISO/DIS 9094:2010)
Petits navires - Protection contre l'incendie (ISO/DIS Kleine Wasserfahrzeuge - Brandschutz (ISO/DIS
9094:2010) 9094:2010)
This draft European Standard is submitted to CEN members for parallel enquiry. It has been drawn up by the Technical Committee
CEN/SS T01.
If this draft becomes a European Standard, CEN members are bound to comply with the CEN/CENELEC Internal Regulations which
stipulate the conditions for giving this European Standard the status of a national standard without any alteration.

This draft European Standard was established by CEN in three official versions (English, French, German). A version in any other language
made by translation under the responsibility of a CEN member into its own language and notified to the CEN Management Centre has the
same status as the official versions.

CEN members are the national standards bodies of Austria, Belgium, Bulgaria, Croatia, Cyprus, Czech Republic, Denmark, Estonia,
Finland, France, Germany, Greece, Hungary, Iceland, Ireland, Italy, Latvia, Lithuania, Luxembourg, Malta, Netherlands, Norway, Poland,
Portugal, Romania, Slovakia, Slovenia, Spain, Sweden, Switzerland and United Kingdom.

Recipients of this draft are invited to submit, with their comments, notification of any relevant patent rights of which they are aware and to
provide supporting documentation.

Warning : This document is not a European Standard. It is distributed for review and comments. It is subject to change without notice and
shall not be referred to as a European Standard.

EUROPEAN COMMITTEE FOR STANDARDIZATION
COMITÉ EUROPÉEN DE NORMALISATION

EUROPÄISCHES KOMITEE FÜR NORMUNG

Management Centre: Avenue Marnix 17, B-1000 Brussels
© 2010 CEN All rights of exploitation in any form and by any means reserved Ref. No. prEN ISO 9094:2010: E
worldwide for CEN national Members.

oSIST prEN ISO 9094:2010
Contents Page
Foreword .3

oSIST prEN ISO 9094:2010
Foreword
This document (prEN ISO 9094:2010) has been prepared by Technical Committee ISO/TC 188 “Small craft”.
This document is currently submitted to the parallel Enquiry.
This document will supersede EN ISO 9094-1:2003, EN ISO 9094-2:2002.
This document has been prepared under a mandate given to CEN by the European Commission and the
European Free Trade Association, and supports essential requirements of EU Directive(s).
For relationship with EU Directive(s), see informative Annex ZA, B, C or D, which is an integral part of this
document.
Endorsement notice
The text of ISO/DIS 9094:2010 has been approved by CEN as a prEN ISO 9094:2010 without any
modification.
oSIST prEN ISO 9094:2010
oSIST prEN ISO 9094:2010
DRAFT INTERNATIONAL STANDARD ISO/DIS 9094
ISO/TC 188 Secretariat: SIS
Voting begins on: Voting terminates on:
2010-01-07 2010-06-07
INTERNATIONAL ORGANIZATION FOR STANDARDIZATION • МЕЖДУНАРОДНАЯ ОРГАНИЗАЦИЯ ПО СТАНДАРТИЗАЦИИ • ORGANISATION INTERNATIONALE DE NORMALISATION
Small craft — Fire protection
Petits navires — Protection contre l'incendie
(Revision of ISO 9094-1:2003 and ISO 9094-2:2002)
ICS 47.080
ISO/CEN PARALLEL PROCESSING
This draft has been developed within the International Organization for Standardization (ISO), and
processed under the ISO-lead mode of collaboration as defined in the Vienna Agreement.
This draft is hereby submitted to the ISO member bodies and to the CEN member bodies for a parallel
five-month enquiry.
Should this draft be accepted, a final draft, established on the basis of comments received, will be
submitted to a parallel two-month approval vote in ISO and formal vote in CEN.
To expedite distribution, this document is circulated as received from the committee secretariat.
ISO Central Secretariat work of editing and text composition will be undertaken at publication
stage.
Pour accélérer la distribution, le présent document est distribué tel qu'il est parvenu du
secrétariat du comité. Le travail de rédaction et de composition de texte sera effectué au
Secrétariat central de l'ISO au stade de publication.
THIS DOCUMENT IS A DRAFT CIRCULATED FOR COMMENT AND APPROVAL. IT IS THEREFORE SUBJECT TO CHANGE AND MAY NOT BE
REFERRED TO AS AN INTERNATIONAL STANDARD UNTIL PUBLISHED AS SUCH.
IN ADDITION TO THEIR EVALUATION AS BEING ACCEPTABLE FOR INDUSTRIAL, TECHNOLOGICAL, COMMERCIAL AND USER PURPOSES, DRAFT
INTERNATIONAL STANDARDS MAY ON OCCASION HAVE TO BE CONSIDERED IN THE LIGHT OF THEIR POTENTIAL TO BECOME STANDARDS TO
WHICH REFERENCE MAY BE MADE IN NATIONAL REGULATIONS.
RECIPIENTS OF THIS DRAFT ARE INVITED TO SUBMIT, WITH THEIR COMMENTS, NOTIFICATION OF ANY RELEVANT PATENT RIGHTS OF WHICH
THEY ARE AWARE AND TO PROVIDE SUPPORTING DOCUMENTATION.
©
International Organization for Standardization, 2010

oSIST prEN ISO 9094:2010
ISO/DIS 9094
PDF disclaimer
This PDF file may contain embedded typefaces. In accordance with Adobe's licensing policy, this file may be printed or viewed but shall
not be edited unless the typefaces which are embedded are licensed to and installed on the computer performing the editing. In
downloading this file, parties accept therein the responsibility of not infringing Adobe's licensing policy. The ISO Central Secretariat
accepts no liability in this area.
Adobe is a trademark of Adobe Systems Incorporated.
Details of the software products used to create this PDF file can be found in the General Info relative to the file; the PDF-creation
parameters were optimized for printing. Every care has been taken to ensure that the file is suitable for use by ISO member bodies. In the
unlikely event that a problem relating to it is found, please inform the Central Secretariat at the address given below.
Copyright notice
This ISO document is a Draft International Standard and is copyright-protected by ISO. Except as permitted
under the applicable laws of the user's country, neither this ISO draft nor any extract from it may be
reproduced, stored in a retrieval system or transmitted in any form or by any means, electronic, photocopying,
recording or otherwise, without prior written permission being secured.
Requests for permission to reproduce should be addressed to either ISO at the address below or ISO's
member body in the country of the requester.
ISO copyright office
Case postale 56  CH-1211 Geneva 20
Tel. + 41 22 749 01 11
Fax + 41 22 749 09 47
E-mail copyright@iso.org
Web www.iso.org
Reproduction may be subject to royalty payments or a licensing agreement.
Violators may be prosecuted.
©
ii ISO 2010 – All rights reserved

oSIST prEN ISO 9094:2010
ISO/DIS 9094
Contents Page
Foreword .iv
Introduction.v
1 Scope.1
2 Normative references.1
3 Terms and definitions .2
4 Fire prevention.3
4.1 Cooking and heating appliances .3
4.2 Materials near cooking or heating appliances .4
4.3 Engine and fuel spaces and exhausts .6
4.4 Electrical installations.7
4.5 Fuel system installations.7
4.6 Liquefied petroleum gas (LPG) systems.7
5 Fire Detection.7
6 Fire Escape .7
6.1 Escape routes from habitable spaces.7
6.2 Fire exits.9
7 Fire fighting equipment.10
7.1 General requirements .10
7.2 Protection of habitable spaces containing sleeping bunks.10
7.3 Protection of habitable spaces containing cooking and heating appliances.10
7.4 Protection of engine space(s) .10
7.5 Portable fire extinguishers .11
7.6 Fixed fire extinguishing systems.13
7.7 Fire blanket .15
8 Displayed information.15
8.1 General requirements .15
8.2 Displayed information requirements.15
8.3 Displayed symbol requirements .17
9 Owner’s manual.17
Annex A (Normative) Fire test .18
Annex B (Normative) Information to be provided in the Owner's manual.19
Annex C (Informative) Classification of fires, fire ratings according the EN3, and the selection of
portable fire extinguishers .22
Annex D (Normative) Selection of fixed fire extinguishing systems .24
Annex E (Informative) Guidance on the selection of fire detection and alarm equipment and the
selection and placement of smoke alarms .26
Annex F (Informative) Selection of materials.28
Bibliography.29
Annex ZA (Informative) Normative references to international publications with their relevant
European publications.30
Annex ZB (informative) Relationship between this European Standard and the Essential
Requirements of EU Directive 94/25/EC.31

oSIST prEN ISO 9094:2010
ISO/DIS 9094
Foreword
ISO (the International Organization for Standardization) is a worldwide federation of national standards bodies
(ISO member bodies). The work of preparing International Standards is normally carried out through ISO
technical committees. Each member body interested in a subject for which a technical committee has been
established has the right to be represented on that committee. International organizations, governmental and
non-governmental, in liaison with ISO, also take part in the work. ISO collaborates closely with the
International Electrotechnical Commission (IEC) on all matters of electrotechnical standardization.
International Standards are drafted in accordance with the rules given in the ISO/IEC Directives, Part 2.
The main task of technical committees is to
...