EN 10217-1:2002/A1:2005

SLOVENSKI STANDARD
01-marec-2005
9DUMHQHMHNOHQHFHYL]DWODþQHSRVRGH7HKQLþQLGREDYQLSRJRMLGHO1HOHJLUDQH
MHNOHQHFHYLVVSHFLILFLUDQLPLODVWQRVWPL]DGHORSULVREQLWHPSHUDWXUL
Welded steel tubes for pressure purposes - Technical delivery conditions - Part 1: Non-
alloy steel tubes with specified room temperature properties
Geschweißte Stahlrohre für Druckbeanspruchungen - Technische Lieferbedingungen -
Teil 1: Rohre aus unlegierten Stählen mit festgelegten Eigenschaften bei
Raumtemperatur
Tubes soudés en acier pour service sous pression - Conditions techniques de livraison -
Partie 1: Tubes en acier non allié avec caractéristiques spécifiées a température
ambiante
Ta slovenski standard je istoveten z: EN 10217-1:2002/A1:2005
ICS:
23.020.30 7ODþQHSRVRGHSOLQVNH Pressure vessels, gas
MHNOHQNH cylinders
77.140.75 Jeklene cevi in cevni profili Steel pipes and tubes for
za posebne namene specific use
2003-01.Slovenski inštitut za standardizacijo. Razmnoževanje celote ali delov tega standarda ni dovoljeno.

EUROPEAN STANDARD
EN 10217-1:2002/A1
NORME EUROPÉENNE
EUROPÄISCHE NORM
January 2005
ICS 23.040.10; 77.140.75
English version
Welded steel tubes for pressure purposes - Technical delivery
conditions - Part 1: Non-alloy steel tubes with specified room
temperature properties
Tubes soudés en acier pour service sous pression - Geschweißte Stahlrohre für Druckbeanspruchungen -
Conditions techniques de livraison - Partie 1: Tubes en Technische Lieferbedingungen - Teil 1: Rohre aus
acier non allié avec caractéristiques spécifiées à unlegierten Stählen mit festgelegten Eigenschaften bei
température ambiante Raumtemperatur
This amendment A1 modifies the European Standard EN 10217-1:2002; it was approved by CEN on 9 December 2004.
CEN members are bound to comply with the CEN/CENELEC Internal Regulations which stipulate the conditions for inclusion of this
amendment into the relevant national standard without any alteration. Up-to-date lists and bibliographical references concerning such
national standards may be obtained on application to the Central Secretariat or to any CEN member.
This amendment exists in three official versions (English, French, German). A version in any other language made by translation under the
responsibility of a CEN member into its own language and notified to the Central Secretariat has the same status as the official versions.
CEN members are the national standards bodies of Austria, Belgium, Cyprus, Czech Republic, Denmark, Estonia, Finland, France,
Germany, Greece, Hungary, Iceland, Ireland, Italy, Latvia, Lithuania, Luxembourg, Malta, Netherlands, Norway, Poland, Portugal, Slovakia,
Slovenia, Spain, Sweden, Switzerland and United Kingdom.
EUROPEAN COMMITTEE FOR STANDARDIZATION
COMITÉ EUROPÉEN DE NORMALISATION
EUROPÄISCHES KOMITEE FÜR NORMUNG
Management Centre: rue de Stassart, 36  B-1050 Brussels
© 2005 CEN All rights of exploitation in any form and by any means reserved Ref. No. EN 10217-1:2002/A1:2005: E
worldwide for CEN national Members.

Contents
Page
Foreword.3
9 Inspection .4
9.1 Types of inspection .4
9.2 Inspection documents.4
Annex ZA (informative) Relationship between this European Standard and the Essential
Requirements of 97/23/EC .6

Foreword
This document (EN 10217-1:2002/A1:2004) has been prepared by Technical Committee ECISS/TC 29 “Steel
tubes and fittings for steel tubes”, the secretariat of which is held by UNI.
This Amendment to European Standard EN 10217-1:2002 shall be given the status of a national standard,
either by publication of an identical text or by endorsement, at the latest by July 2005, and conflicting national
standards shall be withdrawn at the latest by July 2005.
This document has been prepared under a mandate given to CEN by the European Commission and the
European Free Trade Association, and supports essential requirements of EU Directive 97/23/EC.
For relationship with EU Directive 97/23/EC, see informative Annex ZA, which is an integral part of this
document.
According to the CEN/CENELEC Internal Regulations, the national standards organizations of the following
countries are bound to implement this European Standard: Austria, Belgium, Cyprus, Czech Republic,
Denmark, Estonia, Finland, France, Germany, Greece, Hungary, Iceland, Ireland, Italy, Latvia, Lithuania,
Luxembour
...