EN ISO 10893-3:2011/A2:2020
(Amendment)Non-destructive testing of steel tubes - Part 3: Automated full peripheral flux leakage testing of seamless and welded (except submerged arc-welded) ferromagnetic steel tubes for the detection of longitudinal and/or transverse imperfections - Amendment 2: Change acceptance criteria (ISO 10893-3:2011/Amd 2:2020)
Non-destructive testing of steel tubes - Part 3: Automated full peripheral flux leakage testing of seamless and welded (except submerged arc-welded) ferromagnetic steel tubes for the detection of longitudinal and/or transverse imperfections - Amendment 2: Change acceptance criteria (ISO 10893-3:2011/Amd 2:2020)
Zerstörungsfreie Prüfung von Stahlrohren - Teil 3: Automatisierte Streuflussprüfung nahtloser und geschweißter (ausgenommen unterpulvergeschweißter) ferromagnetischer Stahlrohre zum Nachweis von Unvollkommenheiten in Längs- und/oder Querrichtung - Änderung 2: Änderung der Zulässigkeitskriterien (ISO 10893-3:2011/Amd 2:2020)
No scope available
Essais non destructifs des tubes en acier - Partie 3: Contrôle automatisé par flux de fuite sur toute la circonférence des tubes en acier ferromagnétique sans soudure et soudés (sauf à l'arc immergé sous flux en poudre) pour la détection des imperfections longitudinales et/ou transversales - Amendement 2: Changement des critères d'acceptation (ISO 10893-3:2011/Amd 2:2020)
Neporušitveno preskušanje jeklenih cevi - 3. del: Ugotavljanje prečnih/vzdolžnih napak po celotnem obodu feromagnetnih jeklenih cevi, nevarjenih in varjenih (razen obločno varjenih pod praškom), z avtomatizirano preiskavo z magnetno sondo - Dopolnilo A2: Sprememba meril sprejemljivosti (ISO 10893-3:2011/Amd 2:2020)
General Information
Relations
Overview
EN ISO 10893-3:2011/A2:2020 is Amendment 2 to the international standard for non-destructive testing (NDT) of steel tubes using automated full-peripheral magnetic flux leakage (MFL) inspection. The amendment, approved by CEN in May 2020 and published as EN ISO 10893-3:2011/A2:2020, modifies the acceptance criteria applied during routine testing of seamless and welded (except submerged arc-welded) ferromagnetic steel tubes for detection of longitudinal and/or transverse imperfections.
This document is applicable to manufacturers, NDT service providers and quality managers involved in MFL inspections of ferrous steel tubes and provides a narrowly scoped, procedural change that affects retest decisions and suspect tube designation.
Key Topics
- Scope: Automated full-peripheral flux leakage testing of seamless and welded (except SAW) ferromagnetic steel tubes for longitudinal and/or transverse defect detection.
- Amendment focus: Change to the acceptance criterion in clause 8.2 concerning retesting and pass/fail decision logic.
- Specific change: The retest rule in clause 8.2 was revised from requiring "two consecutive retests" to requiring one retest. The updated sentence reads: "If after one retest all signals are lower than the trigger/alarm level, the tube shall be deemed to have passed this test otherwise the tube shall be designated as suspect."
- Regulatory status: Endorsed by CEN as a European Standard and to be implemented as a national standard in CEN member countries by December 2020.
Applications
This amendment has practical implications for organizations performing MFL testing:
- Faster decision-making: Reduces the number of repeat tests required to declare a tube passed, supporting faster throughput on production lines and inspection stations.
- Consistent suspect designation: Harmonizes pass/fail criteria across laboratories and manufacturers who adopt the EN ISO edition.
- Operational efficiency: Potentially lowers inspection time and handling for tubes under test, which benefits high-volume manufacturing and supply-chain quality control.
- Quality assurance: Clarifies procedural expectations for retest and alarm thresholds, aiding auditors and NDT personnel in conformity assessment.
Related Standards
- ISO 10893 series (other parts) - the amendment is part of the broader ISO 10893 family addressing NDT of steel tubes.
- National adoptions and CEN/CENELEC implementation documents - users should refer to the national standard bodies for endorsed national texts and implementation guidance.
Note: The amendment is limited to procedural acceptance criteria; it does not change the fundamental MFL measurement principle. Users should consult the full EN ISO 10893-3:2011/A2:2020 text for official wording, implementation details and any patent or copyright notices.
Frequently Asked Questions
EN ISO 10893-3:2011/A2:2020 is a amendment published by the European Committee for Standardization (CEN). Its full title is "Non-destructive testing of steel tubes - Part 3: Automated full peripheral flux leakage testing of seamless and welded (except submerged arc-welded) ferromagnetic steel tubes for the detection of longitudinal and/or transverse imperfections - Amendment 2: Change acceptance criteria (ISO 10893-3:2011/Amd 2:2020)". This standard covers: No scope available
No scope available
EN ISO 10893-3:2011/A2:2020 is classified under the following ICS (International Classification for Standards) categories: 23.040.10 - Iron and steel pipes; 77.040.20 - Non-destructive testing of metals; 77.140.75 - Steel pipes and tubes for specific use. The ICS classification helps identify the subject area and facilitates finding related standards.
EN ISO 10893-3:2011/A2:2020 has the following relationships with other standards: It is inter standard links to EN ISO 10893-3:2011. Understanding these relationships helps ensure you are using the most current and applicable version of the standard.
You can purchase EN ISO 10893-3:2011/A2:2020 directly from iTeh Standards. The document is available in PDF format and is delivered instantly after payment. Add the standard to your cart and complete the secure checkout process. iTeh Standards is an authorized distributor of CEN standards.
Standards Content (Sample)
SLOVENSKI STANDARD
01-september-2020
Neporušitveno preskušanje jeklenih cevi - 3. del: Ugotavljanje prečnih/vzdolžnih
napak po celotnem obodu feromagnetnih jeklenih cevi, nevarjenih in varjenih
(razen obločno varjenih pod praškom), z avtomatizirano preiskavo z magnetno
sondo - Dopolnilo A2: Sprememba meril sprejemljivosti (ISO 10893-3:2011/Amd
2:2020)
Non-destructive testing of steel tubes - Part 3: Automated full peripheral flux leakage
testing of seamless and welded (except submerged arc-welded) ferromagnetic steel
tubes for the detection of longitudinal and/or transverse imperfections - Amendment 2:
Change acceptance criteria (ISO 10893-3:2011/Amd 2:2020)
Zerstörungsfreie Prüfung von Stahlrohren - Teil 3: Automatisierte Streuflussprüfung
nahtloser und geschweißter (ausgenommen unterpulvergeschweißter)
ferromagnetischer Stahlrohre zum Nachweis von Unvollkommenheiten in Längs-
und/oder Querrichtung - Änderung 2 (ISO 10893-3:2011/Amd 2:2020)
Essais non destructifs des tubes en acier - Partie 3: Contrôle automatisé par flux de fuite
sur toute la circonférence des tubes en acier ferromagnétique sans soudure et soudés
(sauf à l'arc immergé sous flux en poudre) pour la détection des imperfections
longitudinales et/ou transversales - Amendement 2: Changement des critères
d'acceptatio: (ISO 10893-3:2011/Amd 2:2020)
Ta slovenski standard je istoveten z: EN ISO 10893-3:2011/A2:2020
ICS:
23.040.10 Železne in jeklene cevi Iron and steel pipes
77.040.20 Neporušitveno preskušanje Non-destructive testing of
kovin metals
2003-01.Slovenski inštitut za standardizacijo. Razmnoževanje celote ali delov tega standarda ni dovoljeno.
EN ISO 10893-3:2011/A2
EUROPEAN STANDARD
NORME EUROPÉENNE
June 2020
EUROPÄISCHE NORM
ICS 77.140.75; 77.040.20; 23.040.10
English Version
Non-destructive testing of steel tubes - Part 3: Automated
full peripheral flux leakage testing of seamless and welded
(except submerged arc-welded) ferromagnetic steel tubes
for the detection of longitudinal and/or transverse
imperfections - Amendment 2: Change acceptance criteria
(ISO 10893-3:2011/Amd 2:2020)
Essais non destructifs des tubes en acier - Partie 3: Zerstörungsfreie Prüfung von Stahlrohren - Teil 3:
Contrôle automatisé par flux de fuite sur toute la Automatisierte Streuflussprüfung nahtloser und
circonférence des tubes en acier ferromagnétique sans geschweißter (ausgenommen
soudure et soudés (sauf à l'arc immergé sous flux en unterpulvergeschweißter) ferromagnetischer
poudre) pour la détection des imperfections Stahlrohre zum Nachweis von Unvollkommenheiten in
longitudinales et/ou transversales - Amendement 2: Längs- und/oder Querrichtung - Änderung 2 (ISO
Changement des critères d'acceptation (ISO 10893- 10893-3:2011/Amd 2:2020)
3:2011/Amd 2:2020)
This amendment A2 modifies the European Standard EN ISO 10893-3:2011; it was approved by CEN on 11 May 2020.
CEN members are bound to comply with the CEN/CENELEC Internal Regulations which stipulate the conditions for inclusion of
this amendment into the relevant national standard without any alteration. Up-to-date lists and bibliographical references
concerning such national standards may be obtained on application to the CEN-CENELEC Management Centre or to any CEN
member.
This amendment exists in three official versions (English, French, German). A version in any other language made by translation
under the responsibility of a CEN member into its own language and notified to the CEN-CENELEC Management Centre has the
same status as the official versions.
CEN members are the national standards bodies of Austria, Belgium, Bulgaria, Croatia, Cyprus, Czech Republic, Denmark, Estonia,
Finland, France, Germany, Greece, Hungary, Iceland, Ireland, Italy, Latvia, Lithuania, Luxembourg, Malta, Netherlands, Norway,
Poland, Portugal, Republic of North Macedonia, Romania, Serbia, Slovakia, Slovenia, Spain, Sweden, Switzerland, Turkey and
United Kingdom.
EUROPEAN COMMITTEE FOR STANDARDIZATION
COMITÉ EUROPÉEN DE NORMALISATION
EUROPÄISCHES KOMITEE FÜR NORMUNG
CEN-CENELEC Management Centre: Rue de la Science 23, B-1040 Brussels
© 2020 CEN All rights of exploitation in any form and by any means reserved Ref. No. EN ISO 10893-3:2011/A2:2020 E
worldwide for CEN national Members.
Contents Page
European foreword . 3
European foreword
This document (EN ISO 10893-3:2011/A2:2020) has been prepared by Technical Committee ISO/TC 17
"Steel" in collaboration with Technical Committee CEN/TC 459/SC 10 “Steel tubes, and iron and steel
fittings” the secretariat of which is held by UNI.
This Amendment to the European Standard EN ISO 10893-3:2011 shall be given the status of a national
standard, either by publication of an identical text or by endorsement, at the latest by December 2020,
and conflicting national standards shall be withdrawn at the latest by December 2020.
Attention is drawn to the possibility that some of the elements of this document may be the subject of
patent rights. CEN shall not be held responsible for identifying any or all such patent rights.
According to the CEN-CENELEC Internal Regulation
...
Questions, Comments and Discussion
Ask us and Technical Secretary will try to provide an answer. You can facilitate discussion about the standard in here.
Loading comments...