EN ISO 10893-1:2011/A1:2020
(Amendment)Non-destructive testing of steel tubes - Part 1: Automated electromagnetic testing of seamless and welded (except submerged arc-welded) steel tubes for the verification of hydraulic leaktightness - Amendment 1: Change of dimensions of the reference notch; change acceptance criteria (ISO 10893-1:2011/Amd 1:2020)
Non-destructive testing of steel tubes - Part 1: Automated electromagnetic testing of seamless and welded (except submerged arc-welded) steel tubes for the verification of hydraulic leaktightness - Amendment 1: Change of dimensions of the reference notch; change acceptance criteria (ISO 10893-1:2011/Amd 1:2020)
Zerstörungsfreie Prüfung von Stahlrohren - Teil 1: Automatisierte elektromagnetische Prüfung nahtloser und geschweißter (ausgenommen unterpulvergeschweißter) Stahlrohre zum Nachweis der Dichtheit - Änderung 1: Änderung der Maße der Bezugsnut; Änderung der Zulässigkeitskriterien (ISO 10893-1:2011/Amd 1:2020)
No scope available
Essais non destructifs des tubes en acier - Partie 1: Contrôle automatisé électromagnétique pour vérification de l'étanchéité hydraulique des tubes en acier sans soudure et soudés (sauf à l'arc immergé sous flux en poudre) - Amendement 1: Changement de dimensions de l'entaille de référence; changement des critères d'acceptation (ISO 10893-1:2011/Amd 1:2020)
Neporušitveno preskušanje jeklenih cevi - 1. del: Avtomatizirano elektromagnetno preskušanje brezšivnih in varjenih (razen obločno varjenih pod praškom) jeklenih cevi za preverjanje neprepustnosti - Dopolnilo A1: Sprememba dimenzij zareze - sprememba meril sprejemljivosti (ISO 10893-1:2011/Amd 1:2020)
General Information
Relations
Overview
EN ISO 10893-1:2011/A1:2020 is Amendment 1 to the international standard for automated electromagnetic non-destructive testing (NDT) of steel tubes. The amendment applies to seamless and welded steel tubes (except submerged arc-welded) used where verification of hydraulic leaktightness is required. Approved by CEN in May 2020, the amendment updates calibration and acceptance provisions to improve consistency of inspection and leak-detection performance.
Key changes introduced by this amendment include explicit modifications to the reference notch geometry and to the retest / acceptance criteria used during automated electromagnetic testing.
Key Topics
Scope and applicability
- Automated electromagnetic testing of seamless and welded steel tubes (excluding submerged arc-welded).
- Intended for verification of hydraulic leaktightness in production and quality-control environments.
Reference notch dimensions
- The amendment replaces the previous width definition and now requires that the width of the reference notch shall not exceed 1 mm. This change tightens the calibration reference used for detection sensitivity and signal benchmarking.
Acceptance and retest criteria
- The retest rule has been revised: where the previous wording required two consecutive retests to confirm acceptance, the amendment changes this to one retest. If after one retest all signals are below the trigger/alarm level, the tube is deemed to have passed; otherwise it is designated as suspect.
Standard stewardship
- The amendment is issued as ISO 10893-1:2011/Amd 1:2020 and adopted as EN ISO 10893-1:2011/A1:2020 by CEN members. Users should consult their national bodies for the implemented national standard.
Applications
This amendment is relevant to:
- Manufacturers of steel tubes performing in-line automated electromagnetic inspection for hydraulic/leak tightness verification.
- NDT service providers who calibrate and operate automated EM systems and must align reference standards and retest procedures.
- Quality assurance and inspection engineers specifying acceptance criteria for pressure-containing tube products.
Practical benefits include improved reproducibility of EM calibration, clearer acceptance decision rules, and potentially faster inspection throughput due to the revised retest rule.
Related Standards
- ISO 10893 series - other parts address different NDT methods and test requirements for steel tubes.
- National and regional adoptions of EN ISO 10893-1:2011/A1:2020 - implemented by CEN member bodies.
For procurement and implementation, reference the full EN ISO 10893-1:2011/A1:2020 text from your national standards body to ensure compliance with the exact normative language and any national foreword or implementation notes.
Frequently Asked Questions
EN ISO 10893-1:2011/A1:2020 is a amendment published by the European Committee for Standardization (CEN). Its full title is "Non-destructive testing of steel tubes - Part 1: Automated electromagnetic testing of seamless and welded (except submerged arc-welded) steel tubes for the verification of hydraulic leaktightness - Amendment 1: Change of dimensions of the reference notch; change acceptance criteria (ISO 10893-1:2011/Amd 1:2020)". This standard covers: No scope available
No scope available
EN ISO 10893-1:2011/A1:2020 is classified under the following ICS (International Classification for Standards) categories: 23.040.10 - Iron and steel pipes; 77.040.20 - Non-destructive testing of metals; 77.140.75 - Steel pipes and tubes for specific use. The ICS classification helps identify the subject area and facilitates finding related standards.
EN ISO 10893-1:2011/A1:2020 has the following relationships with other standards: It is inter standard links to EN ISO 10893-1:2011. Understanding these relationships helps ensure you are using the most current and applicable version of the standard.
You can purchase EN ISO 10893-1:2011/A1:2020 directly from iTeh Standards. The document is available in PDF format and is delivered instantly after payment. Add the standard to your cart and complete the secure checkout process. iTeh Standards is an authorized distributor of CEN standards.
Standards Content (Sample)
SLOVENSKI STANDARD
01-september-2020
Neporušitveno preskušanje jeklenih cevi - 1. del: Avtomatizirano elektromagnetno
preskušanje brezšivnih in varjenih (razen obločno varjenih pod praškom) jeklenih
cevi za preverjanje neprepustnosti - Dopolnilo A1: Sprememba dimenzij zareze -
sprememba meril sprejemljivosti (ISO 10893-1:2011/Amd 1:2020)
Non-destructive testing of steel tubes - Part 1: Automated electromagnetic testing of
seamless and welded (except submerged arc-welded) steel tubes for the verification of
hydraulic leaktightness - Amendment 1: Change of dimensions of the reference notch -
change acceptance criteria (ISO 10893-1:2011/Amd 1:2020)
Zerstörungsfreie Prüfung von Stahlrohren - Teil 1: Automatisierte elektromagnetische
Prüfung nahtloser und geschweißter (ausgenommen unterpulvergeschweißter)
Stahlrohre zum Nachweis der Dichtheit - Änderung 1 (ISO 10893-1:2011/Amd 1:2020)
Essais non destructifs des tubes en acier - Partie 1: Contrôle automatisé
électromagnétique pour vérification de l'étanchéité hydraulique des tubes en acier sans
soudure et soudés (sauf à l'arc immergé sous flux en poudre) - Amendement 1:
Changement de dimensions de l'entaille de référence; changement critères d'acceptation
(ISO 10893-1:2011/Amd 1:2020)
Ta slovenski standard je istoveten z: EN ISO 10893-1:2011/A1:2020
ICS:
23.040.10 Železne in jeklene cevi Iron and steel pipes
77.040.20 Neporušitveno preskušanje Non-destructive testing of
kovin metals
2003-01.Slovenski inštitut za standardizacijo. Razmnoževanje celote ali delov tega standarda ni dovoljeno.
EN ISO 10893-1:2011/A1
EUROPEAN STANDARD
NORME EUROPÉENNE
June 2020
EUROPÄISCHE NORM
ICS 77.140.75; 77.040.20; 23.040.10
English Version
Non-destructive testing of steel tubes - Part 1: Automated
electromagnetic testing of seamless and welded (except
submerged arc-welded) steel tubes for the verification of
hydraulic leaktightness - Amendment 1: Change of
dimensions of the reference notch; change acceptance
criteria (ISO 10893-1:2011/Amd 1:2020)
Essais non destructifs des tubes en acier - Partie 1: Zerstörungsfreie Prüfung von Stahlrohren - Teil 1:
Contrôle automatisé électromagnétique pour Automatisierte elektromagnetische Prüfung nahtloser
vérification de l'étanchéité hydraulique des tubes en und geschweißter (ausgenommen
acier sans soudure et soudés (sauf à l'arc immergé sous unterpulvergeschweißter) Stahlrohre zum Nachweis
flux en poudre) - Amendement 1: Changement de der Dichtheit - Änderung 1 (ISO 10893-1:2011/Amd
dimensions de l'entaille de référence; changement des 1:2020)
critères d'acceptation (ISO 10893-1:2011/Amd
1:2020)
This amendment A1 modifies the European Standard EN ISO 10893-1:2011; it was approved by CEN on 11 May 2020.
CEN members are bound to comply with the CEN/CENELEC Internal Regulations which stipulate the conditions for inclusion of
this amendment into the relevant national standard without any alteration. Up-to-date lists and bibliographical references
concerning such national standards may be obtained on application to the CEN-CENELEC Management Centre or to any CEN
member.
This amendment exists in three official versions (English, French, German). A version in any other language made by translation
under the responsibility of a CEN member into its own language and notified to the CEN-CENELEC Management Centre has the
same status as the official versions.
CEN members are the national standards bodies of Austria, Belgium, Bulgaria, Croatia, Cyprus, Czech Republic, Denmark, Estonia,
Finland, France, Germany, Greece, Hungary, Iceland, Ireland, Italy, Latvia, Lithuania, Luxembourg, Malta, Netherlands, Norway,
Poland, Portugal, Republic of North Macedonia, Romania, Serbia, Slovakia, Slovenia, Spain, Sweden, Switzerland, Turkey and
United Kingdom.
EUROPEAN COMMITTEE FOR STANDARDIZATION
COMITÉ EUROPÉEN DE NORMALISATION
EUROPÄISCHES KOMITEE FÜR NORMUNG
CEN-CENELEC Management Centre: Rue de la Science 23, B-1040 Brussels
© 2020 CEN All rights of exploitation in any form and by any means reserved Ref. No. EN ISO 10893-1:2011/A1:2020 E
worldwide for CEN national Members.
Contents Page
European foreword . 3
European foreword
This document (EN ISO 10893-1:2011/A1:2020) has been prepared by Technical Committee ISO/TC 17
"Steel" in collaboration with Technical Committee CEN/TC 459/SC 10 “Steel tubes, and iron and steel
fittings” the secretariat of which is held by UNI.
This Amendment to the European Standard EN ISO 10893-1:2011 shall be given the status of a national
standard, either by publication of an identical text or by endorsement, at the latest by December 2020,
and conflicting national standards shall be withdrawn at the latest by December 2020.
Attention is drawn to the possibility that some of the elements of this document may be the subject of
patent rights. CEN shall not be held responsible for identifying any or all such patent rights.
According to the CEN-CENELEC Internal Regulations, the national standards organizations of the
following countries are bound to implement this European Standard: Austria, Belgium, Bulgaria,
Croatia, Cyprus, Czech Republic, Denmark, Estonia, Finlan
...
Questions, Comments and Discussion
Ask us and Technical Secretary will try to provide an answer. You can facilitate discussion about the standard in here.
Loading comments...