Acoustics - Laboratory measurement of sound insulation of building elements - Part 5: Requirements for test facilities and equipment - Amendment 1: Rainfall sound (ISO 10140-5:2010/Amd 1:2014)

2013-07-04 GVN: Text for // vote received in ISO/CS (see notification from 2013-07-03 in dataservice).
2012-09-07 GVN: Text for // enquiry received in ISO/CS (see notification from 2012-09-07 in dataservice)
2010-03-16 EMA: No consultancy required following e-mail sent from PM to dataservice on 2010-03-16.

Akustik - Messung der Schalldämmung von Bauteilen im Prüfstand - Teil 5: Anforderungen an Prüfstände und Prüfeinrichtungen - Änderung 1: Regenschall (ISO 10140-5:2010/Amd 1:2014)

Acoustique - Mesurage en laboratoire de l'isolation acoustique des éléments de construction - Partie 5: Exigences relatives aux installations et appareillage d'essai - Amendement 1: Bruit produit par la pluie (ISO 10140-5:2010/Amd 1:2014, Version corrigée 2014-07-01)

Akustika - Laboratorijsko merjenje zvočne izolirnosti gradbenih elementov - 5. del: Zahteve in oprema za laboratorije - Dopolnilo 1: Hrup zaradi dežja (ISO 10140-5:2010/Amd 1:2014)

Ta del ISO 10140 določa laboratorije in opremo za merjenja zvočne izolirnosti gradbenih elementov, kot so: - komponente in materiali; - gradbeni elementi; - tehnični elementi (majhni gradbeni elementi); - sistemi za izboljšavo zvočne izolirnosti. Velja za laboratorije z zadušenim sevanjem iz bočnih elementov in strukturno izoliranost med virov in sobami za sprejem. Ta del ISO 10140 določa kvalifikacijske postopke, ki se uporabljajo pri začetku obratovanja novega laboratorija z opremo za merjenje zvočne izolirnosti. Njegov namen je, da se ti postopki redno ponavljajo, da se zagotovi odprava kakršnih koli težav z opremo ali z laboratorijem.

General Information

Status
Withdrawn
Publication Date
06-May-2014
Withdrawal Date
04-May-2021
Current Stage
9960 - Withdrawal effective - Withdrawal
Completion Date
05-May-2021

Relations

Buy Standard

Amendment
EN ISO 10140-5:2010/A1:2014
English language
13 pages
sale 10% off
Preview
sale 10% off
Preview
e-Library read for
1 day

Standards Content (Sample)


SLOVENSKI STANDARD
01-september-2014
$NXVWLND/DERUDWRULMVNRPHUMHQMH]YRþQHL]ROLUQRVWLJUDGEHQLKHOHPHQWRYGHO
=DKWHYHLQRSUHPD]DODERUDWRULMH'RSROQLOR+UXS]DUDGLGHåMD ,62
$PG
Acoustics - Laboratory measurement of sound insulation of building elements - Part 5:
Requirements for test facilities and equipment - Amendment 1: Rainfall sound (ISO
10140-5:2010/Amd 1:2014)
Akustik - Messung der Schalldämmung von Bauteilen im Prüfstand - Teil 5:
Anforderungen an Prüfstände und Prüfeinrichtungen - Änderung 1: Regenschall (ISO
10140-5:2010/Amd 1:2014)
Acoustique - Mesurage en laboratoire de l'isolation acoustique des éléments de
construction - Partie 5: Exigences relatives aux installations et appareillage d'essai -
Amendement 1: Bruit produit par la pluie (ISO 10140-5:2010/Amd 1:2014)
Ta slovenski standard je istoveten z: EN ISO 10140-5:2010/A1:2014
ICS:
17.140.01 $NXVWLþQDPHUMHQMDLQ Acoustic measurements and
EODåHQMHKUXSDQDVSORãQR noise abatement in general
91.060.01 Stavbni elementi na splošno Elements of buildings in
general
91.120.20 $NXVWLNDYVWDYEDK=YRþQD Acoustics in building. Sound
L]RODFLMD insulation
2003-01.Slovenski inštitut za standardizacijo. Razmnoževanje celote ali delov tega standarda ni dovoljeno.

EUROPEAN STANDARD
EN ISO 10140-5:2010/A1
NORME EUROPÉENNE
EUROPÄISCHE NORM
May 2014
ICS 91.120.20
English Version
Acoustics - Laboratory measurement of sound insulation of
building elements - Part 5: Requirements for test facilities and
equipment - Amendment 1: Rainfall sound (ISO 10140-
5:2010/Amd 1:2014)
Acoustique - Mesurage en laboratoire de l'isolation Akustik - Messung der Schalldämmung von Bauteilen im
acoustique des éléments de construction - Partie 5: Prüfstand - Teil 5: Anforderungen an Prüfstände und
Exigences relatives aux installations et appareillage d'essai Prüfeinrichtungen - Änderung 1: Regenschall (ISO 10140-
- Amendement 1: Bruit produit par la pluie (ISO 10140- 5:2010/Amd 1:2014)
5:2010/Amd 1:2014)
This amendment A1 modifies the European Standard EN ISO 10140-5:2010; it was approved by CEN on 20 March 2014.

CEN members are bound to comply with the CEN/CENELEC Internal Regulations which stipulate the conditions for inclusion of this
amendment into the relevant national standard without any alteration. Up-to-date lists and bibliographical references concerning such
national standards may be obtained on application to the CEN-CENELEC Management Centre or to any CEN member.

This amendment exists in three official versions (English, French, German). A version in any other language made by translation under the
responsibility of a CEN member into its own language and notified to the CEN-CENELEC Management Centre has the same status as the
official versions.
CEN members are the national standards bodies of Austria, Belgium, Bulgaria, Croatia, Cyprus, Czech Republic, Denmark, Estonia,
Finland, Former Yugoslav Republic of Macedonia, France, Germany, Greece, Hungary, Iceland, Ireland, Italy, Latvia, Lithuania,
Luxembourg, Malta, Netherlands, Norway, Poland, Portugal, Romania, Slovakia, Slovenia, Spain, Sweden, Switzerland, Turkey and United
Kingdom.
EUROPEAN COMMITTEE FOR STANDARDIZATION
COMITÉ EUROPÉEN DE NORMALISATION

EUROPÄISCHES KOMITEE FÜR NORMUNG

CEN-CENELEC Management Centre: Avenue Marnix 17, B-1000 Brussels
© 2014 CEN All rights of exploitation in any form and by any means reserved Ref. No. EN ISO 10140-5:2010/A1:2014 E
worldwide for CEN national Members.

Contents Page
Foreword .3
Foreword
This document (EN ISO 10140-5:2010/A1:2014) has been prepared by Technical Committee ISO/TC 43
"Acoustics" in collaboration with the Technical Committee CEN/TC 126 “Acoustic properties of building
elements and of buildings” the secretariat of which is held by AFNOR.
This Amendment to the European Standard EN ISO 10140-5:2010 shall be given the status of a national
standard, either by publication of an identical text or by endorsement, at the latest by November 2014, and
conflicting national standards shall be withdrawn at the latest by November 2014.
Attention is drawn to the possibility that some of the elements of this document may be the subject of patent
rights. CEN [and/or CENELEC] shall not be held responsible for identifying any or all such patent rights.
According to the CEN-CENELEC Internal Regulations, the national standards organizations of the following
countries are bound to implement this European Standard: Austria, Belgium, Bulgaria, Croatia, Cyprus, Czech
Republic, Denmark, Estonia, Finland, Former Yugoslav Republic of Macedonia, France, Germany, Greece,
Hungary, Iceland, Ireland, Italy, Latvia, Lithuania, Luxembourg, Malta, Netherlands, Norway, Poland, Portugal,
Romania, Slovakia, Slovenia, Spain, Sweden, Switzerland, Turkey and the United Kingdom.
Endorsement notice
The text of ISO 10140-5:2010/Amd 1:2014 has been approved by CEN as EN ISO 10140-5:2010/A1:2014
without any modification.
INTERNATIONAL ISO
STANDARD 10140-5
First edition
2010-09-01
AMENDMENT 1
2014-05-01
Acoustics — Laboratory measurement
of sound insulation of building
elements —
Part 5:
Requirements for test facilities and
equipment
AMENDMENT 1: Rainfall sound
Acoustique — Mesurage en laboratoire de l’isolation acoustique des
éléments de construction —
Partie 5: Exigences relatives aux installations et appareillage d’essai
AMENDEMENT 1: Bruit produit par la pluie
Reference number
ISO 10140-5:2010/Amd.1:2014(E)
©
ISO 2014
ISO 10140-5:2010/Amd.1:2014(E)

© ISO 2014
All rights reserved. Unless otherwise specified, no part of this publication may be reproduced or utilized otherwise in any form
or by any means, electronic or mechanical, including photocopying, or posting on the internet or an intranet, without prior
written permission. Permission can be requested from either ISO at the address below or ISO’s member body in the country of
the requester.
ISO copyright office
Case postale 56 • CH-1211 Geneva 20
Tel. + 41 22 749 01 11
Fax + 41 22 749 09 47
E-mail copyright@iso.org
Web www.iso.org
Published in Switzerland
ii © ISO 2014 – All rights reserved

ISO 10140-5:2010/Amd.1:2014(E)

Foreword
ISO (the International Organization for Standardization) is a worldwide federation of national standards
bodies (ISO member bodies). The work of preparing International Standards is normally carried out
through ISO technical committees. Each member body interested in a subject for which a technical
committee has been established has the right to be represented on that committee. International
organizations, governmental and non-governmental, in liaison with ISO, also take part in the work.
ISO collaborates closely with the International Electrotechnical Commission (IEC) on all matters of
electrotechnical standardization.
The procedures used to develop this document and those intended for its further maintenance are
described in the ISO/IEC Directives, Part 1. In particular the different approval criteria needed for the
different types of ISO documents should be noted. This document was drafted in accordance with the
editorial rules of the ISO/IEC Directives, Part 2. www.iso.org/directives
Attention is drawn to the possibility that some of the elements of this document may be the subject of
patent rights. ISO shall not be held responsible for identifying any or all such patent rights. Details of
any patent rights identified during the development of the document will be in the Introduction and/or
on the ISO list of patent declarations received. www.iso.org/patents
Any trade name used in this document is information given for the convenience of users and does not
constitute an endorsement.
For an explanation on the meaning of ISO specific terms and expressions related to conformity
assessment, as well as information about ISO’s adherence to the WTO principles in the Technical Barriers
to Trade (TBT) see the following URL: Foreword - Supplementary information
The committee responsible for this document is ISO/TC 43, Acoustics, Subcommittee SC 2, Building
acoustics.
ISO 10140-5:2010/Amd.1:2014(E)
Acoustics — Laboratory measurement of sound insulation
of building elements —
Part 5:
Requirements for test facilities and equipment
AMENDMENT 1: Rainfa
...

Questions, Comments and Discussion

Ask us and Technical Secretary will try to provide an answer. You can facilitate discussion about the standard in here.