EN ISO 5395-3:2013
(Main)Garden equipment - Safety requirements for combustion-engine-powered lawnmowers - Part 3: Ride-on lawnmowers with seated operator (ISO 5395-3:2013)
Garden equipment - Safety requirements for combustion-engine-powered lawnmowers - Part 3: Ride-on lawnmowers with seated operator (ISO 5395-3:2013)
ISO 5395-3:2013 specifies safety requirements and their verification for combustion-engine-powered ride-on (seated) rotary lawnmowers and cylinder lawnmowers (hereafter named "lawnmower"), and equipped with: metallic cutting means; and/or non-metallic cutting means with one or more cutting elements pivotally mounted on a generally circular drive unit, where these cutting elements rely on centrifugal force to achieve cutting, and have a kinetic energy for each single cutting element of 10 J or more.
It does not apply to: robotic and remote-controlled lawnmowers, flail mowers, grassland mowers, sickle bar mowers, towed/semi-mounted grass-cutting machines, and scrub-clearing machines; cutting-means assembly when used in combination with an agricultural tractor; electrically powered and battery-powered lawnmowers.
ISO 5395-3:2013 deals with all significant hazards, hazardous situations or events relevant to lawnmowers when used as intended and under the conditions of misuse which are reasonably foreseeable by the manufacturer.
It is not applicable to lawnmowers which are manufactured before the date of publication of this document.
Gartengeräte - Sicherheitsanforderungen für verbrennungsmotorisch angetriebene Rasenmäher - Teil 3: Rasenmäher mit Fahrersitz mit sitzendem Benutzer (ISO 5395-3:2013)
1.1 Dieses Dokument legt Sicherheitsanforderungen und deren Überprüfung für Sichel- und Spindelmäher mit Fahrersitz (sitzend oder stehend) mit Antrieb durch integrierten Verbrennungsmotor (nachfolgend „Rasenmäher“ genannt) und ausgestattet mit:
- metallischem Schneidwerkzeug und/oder
- nichtmetallischem Schneidwerkzeug mit einem oder mehreren Schneidelementen, die auf einer zentralen Antriebseinheit drehbar angeordnet sind und durch Zentrifugalkraft der Schneidelemente den Schneid-vorgang erzeugen und eine kinetische Energie eines einzelnen Schneidwerkzeuges von 10 Joule oder mehr aufweisen.
Dieses Dokument gilt nicht für:
- Robotermäher und Rasenmäher mit Fernsteuerung, Schlegelmäher, Graslandmäher, Balkenmäher, gezogene / halbgezogene Grasschneidemaschinen und Gestrüppmaschinen;
- Schneidwerkzeugbaugruppe, wenn in Kombination mit einem landwirtschaftlichen Traktor genutzt;
- elektrische und Batterie betriebene Rasenmäher.
1.2 Dieses Dokument behandelt alle signifikanten Gefährdungen, Gefährdungssituationen oder -ereignisse (siehe Anhang C), bezogen auf Rasenmäher, wenn sie unter dem vorgegebenen Zweck und bei vom Hersteller vernünftigerweise vorhersehbarem Missbrauch eingesetzt werden.
1.3 Dieses Dokument gilt nicht für Rasenmäher, die vor dem Datum der Veröffentlichung dieses Dokuments hergestellt worden sind.
Matériel de jardinage - Exigences de sécurité pour les tondeuses à gazon à moteur à combustion interne - Partie 3: Tondeuses à gazon à conducteur assis (ISO 5395-3:2013)
L'ISO 5395-3:2013 spécifie les exigences de sécurité, et les méthodes utilisées pour leur vérification, applicables aux tondeuses à gazon à moteur à combustion interne, à axe vertical ou à lames hélicoïdales, et à conducteur assis, équipées d'un organe de coupe métallique, et/ou d'un organe de coupe non métallique avec un ou plusieurs éléments de coupe montés sur une unité centrale, pivotante en général circulaire: l'action de coupe de ces éléments dépend de la force centrifuge et l'énergie cinétique de chacun est égale ou supérieure à 10 J.
L'ISO 5395-3:2013 n'est pas applicable: aux tondeuses à gazon robotisées et télécommandées, tondeuses à fléaux, faucheuses, motofaucheuses à barre de coupe, tondeuses remorquées/semi-portées et débroussailleuses; aux assemblages d'organes de coupe lorsqu'ils sont utilisés avec un tracteur agricole; aux tondeuses à gazon électriques et à batterie.
L'ISO 5395-3:2013 traite de tous les phénomènes dangereux significatifs, situations ou événements dangereux applicables aux tondeuses à gazon lorsqu'elles sont utilisées comme prévu et dans des conditions de mauvaise utilisation raisonnablement prévisibles par le fabricant.
L'ISO 5395-3:2013 n'est pas applicable aux tondeuses à gazon qui sont fabriquées avant sa date de publication.
Oprema za nego vrta - Varnostne zahteve za motorne vrtne kosilnice - 3. del: Kosilnice s sedežem za košnjo v sedečem položaju (ISO 5395-3:2013)
Ta del standarda ISO 5395 določa varnostne zahteve in njihovo preverjanje za motorne vrtne kosilnice s sedežem za košnjo v sedečem položaju in cilindrične vrtne kosilnice (v nadaljnjem besedilu: »vrtna kosilnica«), ki so opremljene z: – kovinskim rezalnim mehanizmom in/ali – nekovinskim rezalnim mehanizmom z enim ali več rezalnimi elementi, ki so vrtljivo nameščeni na splošno krožno pogonsko enoto, pri čemer se ti rezalni elementi zanašajo na centrifugalno silo, da dosežejo rezanje, s kinetično energijo enega rezalnega elementa, ki presega 10 J. Ta del standarda ISO 5395 se ne uporablja za: – robotske in daljinsko vodene vrtne kosilnice, mulčerje, kosilnice za travišča, kosilnice s srpom na drogu, vlečene/polpriklopne stroje za košnjo trave in stroje za odstranjevanje grmičev; – sestave za košnjo, kadar se uporabljajo v kombinaciji s kmetijskim traktorjem; – vrtne kosilnice na električni in baterijski pogon.
General Information
Relations
Standards Content (Sample)
SLOVENSKI STANDARD
01-januar-2014
1DGRPHãþD
SIST EN 836:1998+A4:2011
SIST ISO 5395:1995
2SUHPD]DQHJRYUWD9DUQRVWQH]DKWHYH]DPRWRUQHYUWQHNRVLOQLFHGHO
.RVLOQLFHVVHGHåHP]DNRãQMRYVHGHþHPSRORåDMX ,62
Garden equipment - Safety requirements for combustion-engine-powered lawnmowers -
Part 3: Ride-on lawnmowers with seated operator (ISO 5395-3:2013)
Gartengeräte - Sicherheitsanforderungen für verbrennungsmotorisch angetriebene
Rasenmäher - Teil 3: Rasenmäher mit Fahrersitz mit sitzendem Benutzer (ISO 5395-
3:2013)
Matériel de jardinage - Exigences de sécurité pour les tondeuses à gazon à moteur à
combustion interne - Partie 3: Tondeuses à gazon à conducteur assis (ISO 5395-3:2013)
Ta slovenski standard je istoveten z: EN ISO 5395-3:2013
ICS:
65.060.70 Vrtnarska oprema Horticultural equipment
2003-01.Slovenski inštitut za standardizacijo. Razmnoževanje celote ali delov tega standarda ni dovoljeno.
EUROPEAN STANDARD
EN ISO 5395-3
NORME EUROPÉENNE
EUROPÄISCHE NORM
September 2013
ICS 65.060.70 Supersedes EN 836:1997+A4:2011
English Version
Garden equipment - Safety requirements for combustion-engine-
powered lawnmowers - Part 3: Ride-on lawnmowers with seated
operator (ISO 5395-3:2013)
Matériel de jardinage - Exigences de sécurité pour les Gartengeräte - Sicherheitsanforderungen für
tondeuses à gazon à moteur à combustion interne - Partie verbrennungsmotorisch angetriebene Rasenmäher - Teil 3:
3: Tondeuses à gazon à conducteur assis (ISO 5395- Rasenmäher mit Fahrersitz mit sitzendem Benutzer (ISO
3:2013) 5395-3:2013)
This European Standard was approved by CEN on 19 July 2013.
CEN members are bound to comply with the CEN/CENELEC Internal Regulations which stipulate the conditions for giving this European
Standard the status of a national standard without any alteration. Up-to-date lists and bibliographical references concerning such national
standards may be obtained on application to the CEN-CENELEC Management Centre or to any CEN member.
This European Standard exists in three official versions (English, French, German). A version in any other language made by translation
under the responsibility of a CEN member into its own language and notified to the CEN-CENELEC Management Centre has the same
status as the official versions.
CEN members are the national standards bodies of Austria, Belgium, Bulgaria, Croatia, Cyprus, Czech Republic, Denmark, Estonia,
Finland, Former Yugoslav Republic of Macedonia, France, Germany, Greece, Hungary, Iceland, Ireland, Italy, Latvia, Lithuania,
Luxembourg, Malta, Netherlands, Norway, Poland, Portugal, Romania, Slovakia, Slovenia, Spain, Sweden, Switzerland, Turkey and United
Kingdom.
EUROPEAN COMMITTEE FOR STANDARDIZATION
COMITÉ EUROPÉEN DE NORMALISATION
EUROPÄISCHES KOMITEE FÜR NORMUNG
CEN-CENELEC Management Centre: Avenue Marnix 17, B-1000 Brussels
© 2013 CEN All rights of exploitation in any form and by any means reserved Ref. No. EN ISO 5395-3:2013: E
worldwide for CEN national Members.
Contents Page
Foreword .3
Annex ZA (informative) Relationship between this European Standard and the Essential
Requirements of EU Directive 97/23/EC (PED) .4
Foreword
This document (EN ISO 5395-3:2013) has been prepared by Technical Committee ISO/TC 23 "Tractors and
machinery for agriculture and forestry" in collaboration with Technical Committee CEN/TC 144 “Tractors and
machinery for agriculture and forestry” the secretariat of which is held by AFNOR.
This European Standard shall be given the status of a national standard, either by publication of an identical
text or by endorsement, at the latest by March 2014, and conflicting national standards shall be withdrawn at
the latest by September 2014.
Attention is drawn to the possibility that some of the elements of this document may be the subject of patent
rights. CEN [and/or CENELEC] shall not be held responsible for identifying any or all such patent rights.
This document supersedes EN 836:1997+A4:2011.
This document has been prepared under a mandate given to CEN by the European Commission and the
European Free Trade Association, and supports essential requirements of EU Directive.
For relationship with EU Directive, see informative Annex ZA, which is an integral part of this document.
According to the CEN-CENELEC Internal Regulations, the national standards organizations of the following
countries are bound to implement this European Standard: Austria, Belgium, Bulgaria, Croatia, Cyprus, Czech
Republic, Denmark, Estonia, Finland, Former Yugoslav Republic of Macedonia, France, Germany, Greece,
Hungary, Iceland, Ireland, Italy, Latvia, Lithuania, Luxembourg, Malta, Netherlands, Norway, Poland, Portugal,
Romania, Slovakia, Slovenia, Spain, Sweden, Switzerland, Turkey and the United Kingdom.
Endorsement notice
The text of ISO 5395-3:2013 has been approved by CEN as EN ISO 5395-3:2013 without any modification.
Annex ZA
(informative)
Relationship between this European Standard and the Essential
Requirements of EU Directive 97/23/EC (PED)
This European Standard has been prepared under a mandate given to CEN by the European Commission
and the European Free Trade Association to provide a means of conforming to Essential Requirements of the
New Approach Directive 2006/42/EC amended by 2009/127/EC.
Once this standard is cited in the Official Journal of the European Union under that Directive and has been
implemented as a national standard in at least one Member State, compliance with the normative clauses of
this standard confers, within the limits of the scope of this standard, a presumption of conformity with the
relevant Essential Requirements of that Directive and associated EFTA regulations.
WARNING — Other requirements and other EU Directives may be applicable to the product(s) falling within
the scope of this standard.
NOTE Compliance with Part 3, together with Part 1, is necessary to achieve presumption of conformity
with the Essential Requirements of Directive 2006/42/EC and associated EFTA regulations.
INTERNATIONAL ISO
STANDARD 5395-3
Second edition
2013-09-01
Garden equipment — Safety
requirements for
combustion-engine-powered
lawnmowers —
Part 3:
Ride-on lawnmowers with seated
operator
Matériel de jardinage — Exigences de sécurité pour les tondeuses à
gazon à moteur à combustion interne —
Partie 3: Tondeuses à gazon à conducteur assis
Reference number
ISO 5395-3:2013(E)
©
ISO 2013
ISO 5395-3:2013(E)
© ISO 2013
All rights reserved. Unless otherwise specified, no part of this publication may be reproduced or utilized otherwise in any form
or by any means, electronic or mechanical, including photocopying, or posting on the internet or an intranet, without prior
written permission. Permission can be requested from either ISO at the address below or ISO’s member body in the country of
the requester.
ISO copyright office
Case postale 56 • CH-1211 Geneva 20
Tel. + 41 22 749 01 11
Fax + 41 22 749 09 47
E-mail copyright@iso.org
Web www.iso.org
Published in Switzerland
ii © ISO 2013 – All rights reserved
ISO 5395-3:2013(E)
Contents Page
Foreword .iv
Introduction .v
1 Scope . 1
2 Normative references . 1
3 Terms and definitions . 2
4 Requirements for ride-on lawnmowers . 2
4.1 General . 2
4.2 Controls . 2
4.3 Operator presence control (OPC) . 6
4.4 Brakes . 6
4.5 Guards . 9
4.6 Stability .11
4.7 Rollover protective structure (ROPS) .12
4.8 Seat belts .12
4.9 Seats and foot rests .13
4.10 Transport position of the cutting-means assembly .14
4.11 Separate fan for grass collection .14
4.12 Hot surfaces .15
4.13 Exhaust fumes .15
4.14 Pressurized components of hydraulic systems .15
4.15 Liquid spillage .15
4.16 Electrical system .16
4.17 Electromagnetic immunity .16
4.18 Noise .17
4.19 Vibration .17
5 Particular requirements for ride-on rotary lawnmowers.18
5.1 Cutting means .18
5.2 Impact of the cutting means .19
5.3 Cutting-means enclosure .19
5.4 Structural integrity .23
5.5 Thrown objects .23
5.6 Grass catchers .24
6 Particular requirements for ride-on cylinder lawnmowers .24
6.1 Cutting-means enclosure .
...
Questions, Comments and Discussion
Ask us and Technical Secretary will try to provide an answer. You can facilitate discussion about the standard in here.