EN ISO 5395-1:2013

SLOVENSKI STANDARD
01-januar-2014
1DGRPHãþD
SIST EN 836:1998+A4:2011
SIST ISO 5395:1995
Oprema za nego vrta - Varnostne zahteve za motorne vrtne kosilnice - 1. del:
Terminologija in splošni preskusi (ISO 5395-1:2013)
Garden equipment - Safety requirements for combustion-engine-powered lawnmowers -
Part 1: Terminology and common tests (ISO 5395-1:2013)
Gartengeräte - Sicherheitsanforderungen für verbrennungsmotorisch angetriebene
Rasenmäher - Teil 1: Begriffe und allgemeine Prüfverfahren (ISO 5395-1:2013)
Matériel de jardinage - Exigences de sécurité pour les tondeuses à gazon à moteur à
combustion interne - Partie 1: Terminologie et essais communs (ISO 5395-1:2013)
Ta slovenski standard je istoveten z: EN ISO 5395-1:2013
ICS:
65.060.70 Vrtnarska oprema Horticultural equipment
2003-01.Slovenski inštitut za standardizacijo. Razmnoževanje celote ali delov tega standarda ni dovoljeno.

EUROPEAN STANDARD
EN ISO 5395-1
NORME EUROPÉENNE
EUROPÄISCHE NORM
September 2013
ICS 65.060.70 Supersedes EN 836:1997+A4:2011
English Version
Garden equipment - Safety requirements for combustion-engine-
powered lawnmowers - Part 1: Terminology and common tests
(ISO 5395-1:2013)
Matériel de jardinage - Exigences de sécurité pour les Gartengeräte - Sicherheitsanforderungen für
tondeuses à gazon à moteur à combustion interne - Partie verbrennungsmotorisch angetriebene Rasenmäher - Teil 1:
1: Terminologie et essais communs (ISO 5395-1:2013) Begriffe und allgemeine Prüfverfahren (ISO 5395-1:2013)
This European Standard was approved by CEN on 19 July 2013.

CEN members are bound to comply with the CEN/CENELEC Internal Regulations which stipulate the conditions for giving this European
Standard the status of a national standard without any alteration. Up-to-date lists and bibliographical references concerning such national
standards may be obtained on application to the CEN-CENELEC Management Centre or to any CEN member.

This European Standard exists in three official versions (English, French, German). A version in any other language made by translation
under the responsibility of a CEN member into its own language and notified to the CEN-CENELEC Management Centre has the same
status as the official versions.

CEN members are the national standards bodies of Austria, Belgium, Bulgaria, Croatia, Cyprus, Czech Republic, Denmark, Estonia,
Finland, Former Yugoslav Republic of Macedonia, France, Germany, Greece, Hungary, Iceland, Ireland, Italy, Latvia, Lithuania,
Luxembourg, Malta, Netherlands, Norway, Poland, Portugal, Romania, Slovakia, Slovenia, Spain, Sweden, Switzerland, Turkey and United
Kingdom.
EUROPEAN COMMITTEE FOR STANDARDIZATION
COMITÉ EUROPÉEN DE NORMALISATION

EUROPÄISCHES KOMITEE FÜR NORMUNG

CEN-CENELEC Management Centre: Avenue Marnix 17, B-1000 Brussels
© 2013 CEN All rights of exploitation in any form and by any means reserved Ref. No. EN ISO 5395-1:2013: E
worldwide for CEN national Members.

Contents Page
Foreword .3
Annex ZA (informative) Relationship between this European Standard and the Essential
Requirements of EU Directive 2006/42/EC on machinery amended by 2009/127/EC .4

Foreword
This document (EN ISO 5395-1:2013) has been prepared by Technical Committee ISO/TC 23 "Tractors and
machinery for agriculture and forestry" in collaboration with Technical Committee CEN/TC 144 “Tractors and
machinery for agriculture and forestry” the secretariat of which is held by AFNOR.
This European Standard shall be given the status of a national standard, either by publication of an identical
text or by endorsement, at the latest by March 2014, and conflicting national standards shall be withdrawn at
the latest by September 2014.
Attention is drawn to the possibility that some of the elements of this document may be the subject of patent
rights. CEN [and/or CENELEC] shall not be held responsible for identifying any or all such patent rights.
This document supersedes EN 836:1997+A4:2011.
This document has been prepared under a mandate given to CEN by the European Commission and the
European Free Trade Association, and supports essential requirements of EU Directive.
For relationship with EU Directive, see informative Annex ZA, which is an integral part of this document.
According to the CEN-CENELEC Internal Regulations, the national standards organizations of the following
countries are bound to implement this European Standard: Austria, Belgium, Bulgaria, Croatia, Cyprus, Czech
Republic, Denmark, Estonia, Finland, Former Yugoslav Republic of Macedonia, France, Germany, Greece,
Hungary, Iceland, Ireland, Italy, Latvia, Lithuania, Luxembourg, Malta, Netherlands, Norway, Poland, Portugal,
Romania, Slovakia, Slovenia, Spain, Sweden, Switzerland, Turkey and the United Kingdom.
Endorsement notice
The text of ISO 5395-1:2013 has been approved by CEN as EN ISO 5395-1:2013 without any modification.
Annex ZA
(informative)
Relationship between this European Standard and the Essential
Requirements of EU Directive 2006/42/EC on machinery amended by
2009/127/EC
This European Standard has been prepared under a mandate given to CEN by the European Commission
and the European Free Trade Association to provide a means of conforming to Essential Requirements of the
New Approach Directive 2006/42/EC amended by 2009/127/EC.
Once this standard is cited in the Official Journal of the European Union under that Directive and has been
implemented as a national standard in at least one Member State, compliance with the normative clauses of
this standard confers, within the limits of the scope of this standard, a presumption of conformity with the
relevant Essential Requirements of that Directive and associated EFTA regulations.
WARNING — Other requirements and other EU Directives may be applicable to the product(s) falling within
the scope of this standard.
NOTE The main function of EN ISO 5395-1 is to provide test procedures for the verification of the
requirements of Part 2 and Part 3 of this standard. Compliance with Part 1 together with either Part 2 or Part
3, as appropriate, is necessary to achieve presumption of conformity with the Essential Requirements of
Directive 2006/42/EC and associated EFTA regulations.
INTERNATIONAL ISO
STANDARD 5395-1
Second edition
2013-09-01
Garden equipment — Safety
requirements for combustion-engine-
powered lawnmowers —
Part 1:
Terminology and common tests
Matériel de jardinage — Exigences de sécurité pour les tondeuses à
gazon à moteur à combustion interne —
Partie 1: Terminologie et essais communs
Reference number
ISO 5395-1:2013(E)
©
ISO 2013
ISO 5395-1:2013(E)
© ISO 2013
All rights reserved. Unless otherwise specified, no part of this publication may be reproduced or utilized otherwise in any form
or by any means, electronic or mechanical, including photocopying, or posting on the internet or an intranet, without prior
written permission. Permission can be requested from either ISO at the address below or ISO’s member body in the country of
the requester.
ISO copyright office
Case postale 56 • CH-1211 Geneva 20
Tel. + 41 22 749 01 11
Fax + 41 22 749 09 47
E-mail copyright@iso.org
Web www.iso.org
Published in Switzerland
ii © ISO 2013 – All rights reserved

ISO 5395-1:2013(E)
Contents Page
Foreword .iv
Introduction .v
1 Scope . 1
2 Normative references . 1
3 Terms and definitions . 2
4 Common test methods . 6
Annex A (normative) Lawnmower cutting-means stopping time test . 8
Annex B (normative) Rotary lawnmower cutting-means impact test .10
Annex C (normative) Rotary lawnmower foot protection test .13
Annex D (normative) Rotary lawnmower structural integrity test .16
Annex E (normative) Rotary lawnmower thrown object test .19
Annex F (normative) Noise test code (Grade 2) .32
Annex G (normative) Vibration test code — Whole-body vibration and hand-arm vibration .37
Annex H (normative) Determination of hot surfaces .43
Annex I (informative) Example of a material and construction fulfilling the requirements for an
artificial surface .46
Bibliography .48
ISO 5395-1:2013(E)
Foreword
ISO (the International Organization for Standardization) is a worldwide federation of national standards
bodies (ISO member bodies). The work of preparing International Standards is normally carried out
through ISO technical committees. Each member body interested in a subject for which a technical
committee has been established has the right to be represented on that committee. International
organizations, governmental and non-governmental, in liaison with ISO, also take part in the work.
ISO collaborates closely with the International Electrotechnical Commission (IEC) on all matters of
electrotechnical standardization.
International Standards are drafted in accordance with the rules given in the ISO/IEC Directives, Part 2.
The main task of technical committees is to prepare International Standards. Draft International
Standards adopted by the technical committees are circulated to the member bodies for voting.
Publication as an International Standard requires approval by at least 75 % of the member bodies
casting a vote.
Attention is drawn to the possibility that some of the elements of this document may be the subject of
patent rights. ISO shall not be held responsible for identifying any or all such patent rights.
ISO 5395-1 was prepared by the European Committee for Standarization (CEN) Technical Committee
CEN/TC 144, Tractors and machinery for agriculture and forestry in collaboration with ISO Technical
Committee TC 23, Tractors and machinery for agriculture and forestry, Subcommittee SC 13, Powered
lawn and garden equipment, in accordance with the Agreement on technical cooperation between ISO
and CEN (Vienna Agreement).
This second edition of ISO 5395-1, together with ISO 5395-2 and ISO 5395-3, cancels and replaces
ISO 5395:1990, which has been technically revised. These three parts also incorporate the Amendment
ISO 5395:1990/Amd.1:1992.
ISO 5395 consists of the following parts, under the general title Garden equipment — Safety requirements
for combustion-engine-powered lawnmowers
— Part 1: Terminology and common tests
— Part 2: Pedestrian-controlled lawnmowers
— Part 3: Ride-on lawnmowers with seated operator
iv © ISO 2013 – All rights reserved

ISO 5395-1:2013(E)
Introduction
This document is a type-C standard as stated in ISO 12100.
The machinery concerned and the extent to which hazards, hazardous situations or hazardous events
are covered are indicated in the scope of this document.
When requirements of this type-C standard are different from those which are stated in type-A or
type-B standards, the requirements of this type-C standard take precedence over the requirements of
the other standards for machines that have been designed and built according to the requirements of
this type-C standard.
INTERNATIONAL STANDARD ISO 5395-1:2013(E)
Garden equipment — Safety requirements for combustion-
engine-powered lawnmowers —
Part 1:
Terminology and common tests
1 Scope
This part of ISO 5395 specifies terminology and common test methods used for verification of safety
requirements for combustion engine powered rotary
...