EN ISO 5395-2:2013
(Main)Garden equipment - Safety requirements for combustion-engine-powered lawnmowers - Part 2: Pedestrian-controlled lawnmowers (ISO 5395-2:2013)
Garden equipment - Safety requirements for combustion-engine-powered lawnmowers - Part 2: Pedestrian-controlled lawnmowers (ISO 5395-2:2013)
ISO 5395-2:2013 specifies safety requirements and their verification for combustion-engine-powered pedestrian-controlled (with or without sulky) rotary lawnmowers and cylinder lawnmowers (hereafter named "lawnmower"), and equipped with: metallic cutting means; and/or non-metallic cutting means with one or more cutting elements pivotally mounted on a generally circular drive unit, where these cutting elements rely on centrifugal force to achieve cutting, and have a kinetic energy for each single cutting element of 10 J or more.
It does not apply to: robotic and remote-controlled lawnmowers, flail mowers, grassland mowers, sickle bar mowers, towed/semi-mounted grass-cutting machines, and scrub-clearing machines; electrically powered and battery-powered lawnmowers; pedestrian-controlled lawnmowers with a swing-over handle.
Note that IEC 60335-1 together with IEC 60335-2-77 give requirements for pedestrian-controlled walk-behind electrically powered lawnmowers.
ISO 5395-2:2013 deals with all significant hazards, hazardous situations or events relevant to lawnmowers when used as intended and under the conditions of misuse which are reasonably foreseeable by the manufacturer.
It is not applicable to lawnmowers which are manufactured before the date of publication of this document.
Gartengeräte - Sicherheitsanforderungen für verbrennungsmotorisch angetriebene Rasenmäher - Teil 2: Handgeführte Rasenmäher (ISO 5395-2:2013)
1.1 Dieser Teil der ISO 5395 legt Sicherheitsanforderungen und deren Überprüfung für handgeführte Sichel- und Spindelmäher (nachfolgend „Rasenmäher“ genannt) mit Antrieb durch integrierten Verbrennungs¬motor (mit oder ohne Mitfahreinrichtung) und ausgestattet mit:
- metallischem Schneidwerkzeug, und/oder
- nichtmetallischem Schneidwerkzeug mit einem oder mehreren Schneidelementen, die auf einer zentralen Antriebseinheit drehbar angeordnet sind und durch Zentrifugalkraft der Schneidelemente den Schneid-vorgang erzeugen und einer kinetische Energie eines einzelnen Schneidwerkzeuges von 10 Joule und mehr.
Dieses Dokument gilt nicht für:
- Robotermäher und Rasenmäher mit Fernsteuerung, Schlegelmäher, Graslandmäher, Balkenmäher, gezogene/halbgezogene Grasschneidemaschinen und Gestrüppmaschinen;
- elektrische und Batterie betriebene Rasenmäher.
- handgeführte Rasenmäher mit umschwenkbarem Holm.
ANMERKUNG IEC 60335-1 [2] zusammen mit IEC 60335-2-77 [3] legen die Anforderungen für handgeführte elektrische betriebene Rasenmäher fest.
1.2 Dieses Dokument behandelt alle signifikanten Gefährdungen, Gefährdungssituationen oder -ereignisse (siehe Anhang A), bezogen auf Rasenmäher wenn sie unter dem vorgegebenen Zweck und bei vom Hersteller vernünftigerweise vorhersehbarem Missbrauch eingesetzt werden.
1.3 Dieses Dokument gilt nicht für Rasenmäher, die vor dem Datum der Veröffentlichung dieses Dokuments hergestellt worden sind.
Matériel de jardinage - Exigences de sécurité pour les tondeuses à gazon à moteur à combustion interne - Partie 2: Tondeuses à gazon à conducteur à pied (ISO 5395-2:2013)
L'ISO 5395-2:2013 spécifie les exigences de sécurité, et les méthodes utilisées pour leur vérification, applicables aux tondeuses à gazon à moteur à combustion interne, à axe vertical ou à lames hélicoïdales, à conducteur à pied, y compris les tondeuses à gazon à conducteur à pied avec sulky et opérateur assis (appelées «tondeuses à gazon» dans la suite du texte), équipées: d'un organe de coupe métallique, et/ou d'un organe de coupe non métallique avec un ou plusieurs éléments de coupe montés d'une manière pivotante sur une unité centrale pivotante, en général circulaire: l'action de coupe de ces éléments dépend de la force centrifuge et l'énergie cinétique de chaque élément de coupe est égale ou supérieure à 10 J.
L'ISO 5395-2:2013 n'est pas applicable aux tondeuses à gazon robotisées et télécommandées, tondeuses à fléaux, faucheuses, motofaucheuses à barre de coupe, tondeuses remorquées/semi-portées et débroussailleuses; aux tondeuses à gazon électriques et à batterie; aux tondeuses à gazon à conducteur à pied munies d'un mancheron balancier.
NOTE La CEI 60335‑1 et la CEI 60335‑2‑77 donnent les exigences relatives aux tondeuses à gazon électriques à conducteur à pied.
L'ISO 5395-2:2013 traite de tous les phénomènes, situations ou événements dangereux applicables aux tondeuses à gazon lorsqu'elles sont utilisées comme prévu et dans des conditions de mauvaise utilisation raisonnablement prévisibles par le fabricant.
Elle n'est pas applicable aux tondeuses à gazon fabriquées avant la date de publication du présent document.
Oprema za nego vrta - Varnostne zahteve za motorne vrtne kosilnice - 2. del: Ročno vodene vrtne kosilnice (ISO 5395-2:2013)
Ta del standarda ISO 5395 določa varnostne zahteve in njihovo preverjanje za motorne ročno vodene rotacijske vrtne kosilnice in cilindrične vrtne kosilnice, vključno z ročno vodenimi kosilnicami z vozom za košnjo v sedečem položaju (v nadaljnjem besedilu: »vrtna kosilnica«), ki so opremljene z: – kovinskim rezalnim mehanizmom in/ali – nekovinskim rezalnim mehanizmom z enim ali več rezalnimi elementi, ki so vrtljivo nameščeni na splošno krožno pogonsko enoto, pri čemer se ti rezalni elementi zanašajo na centrifugalno silo, da dosežejo rezanje, s kinetično energijo enega rezalnega elementa, ki presega 10 J. Ta del standarda ISO 5395 se ne uporablja za: – robotske in daljinsko vodene vrtne kosilnice, mulčerje, kosilnice za travišča, kosilnice s srpom na drogu, vlečene/polpriklopne stroje za košnjo trave in stroje za odstranjevanje grmičev; – vrtne kosilnice na električni in baterijski pogon; – ročno vodene vrtne kosilnice z nihajnim ročajem.
General Information
Relations
Standards Content (Sample)
SLOVENSKI STANDARD
01-januar-2014
1DGRPHãþD
SIST EN 836:1998+A4:2011
SIST ISO 5395:1995
2SUHPD]DQHJRYUWD9DUQRVWQH]DKWHYH]DPRWRUQHYUWQHNRVLOQLFHGHO
5RþQRYRGHQHYUWQHNRVLOQLFH,62
Garden equipment - Safety requirements for combustion-engine-powered lawnmowers -
Part 2: Pedestrian-controlled lawnmowers (ISO 5395-2:2013)
Gartengeräte - Sicherheitsanforderungen für verbrennungsmotorisch angetriebene
Rasenmäher - Teil 2: Handgeführte Rasenmäher (ISO 5395-2:2013)
Matériel de jardinage - Exigences de sécurité pour les tondeuses à gazon à moteur à
combustion interne - Partie 2: Tondeuses à gazon à conducteur à pied (ISO 5395-
2:2013)
Ta slovenski standard je istoveten z: EN ISO 5395-2:2013
ICS:
65.060.70 Vrtnarska oprema Horticultural equipment
2003-01.Slovenski inštitut za standardizacijo. Razmnoževanje celote ali delov tega standarda ni dovoljeno.
EUROPEAN STANDARD
EN ISO 5395-2
NORME EUROPÉENNE
EUROPÄISCHE NORM
September 2013
ICS 65.060.70 Supersedes EN 836:1997+A4:2011
English Version
Garden equipment - Safety requirements for combustion-engine-
powered lawnmowers - Part 2: Pedestrian-controlled
lawnmowers (ISO 5395-2:2013)
Matériel de jardinage - Exigences de sécurité pour les Gartengeräte - Sicherheitsanforderungen für
tondeuses à gazon à moteur à combustion interne - Partie verbrennungsmotorisch angetriebene Rasenmäher - Teil 2:
2: Tondeuses à gazon à conducteur à pied (ISO 5395- Handgeführte Rasenmäher (ISO 5395-2:2013)
2:2013)
This European Standard was approved by CEN on 19 July 2013.
CEN members are bound to comply with the CEN/CENELEC Internal Regulations which stipulate the conditions for giving this European
Standard the status of a national standard without any alteration. Up-to-date lists and bibliographical references concerning such national
standards may be obtained on application to the CEN-CENELEC Management Centre or to any CEN member.
This European Standard exists in three official versions (English, French, German). A version in any other language made by translation
under the responsibility of a CEN member into its own language and notified to the CEN-CENELEC Management Centre has the same
status as the official versions.
CEN members are the national standards bodies of Austria, Belgium, Bulgaria, Croatia, Cyprus, Czech Republic, Denmark, Estonia,
Finland, Former Yugoslav Republic of Macedonia, France, Germany, Greece, Hungary, Iceland, Ireland, Italy, Latvia, Lithuania,
Luxembourg, Malta, Netherlands, Norway, Poland, Portugal, Romania, Slovakia, Slovenia, Spain, Sweden, Switzerland, Turkey and United
Kingdom.
EUROPEAN COMMITTEE FOR STANDARDIZATION
COMITÉ EUROPÉEN DE NORMALISATION
EUROPÄISCHES KOMITEE FÜR NORMUNG
CEN-CENELEC Management Centre: Avenue Marnix 17, B-1000 Brussels
© 2013 CEN All rights of exploitation in any form and by any means reserved Ref. No. EN ISO 5395-2:2013: E
worldwide for CEN national Members.
Contents Page
Foreword .3
Annex ZA (informative) Relationship between this European Standard and the Essential
Requirements of EU Directive 2006/42/EC on machinery amended by 2009/127/EC .4
Foreword
This document (EN ISO 5395-2:2013) has been prepared by Technical Committee ISO/TC 23 "Tractors and
machinery for agriculture and forestry" in collaboration with Technical Committee CEN/TC 144 “Tractors and
machinery for agriculture and forestry” the secretariat of which is held by AFNOR.
This European Standard shall be given the status of a national standard, either by publication of an identical
text or by endorsement, at the latest by March 2014, and conflicting national standards shall be withdrawn at
the latest by September 2014.
Attention is drawn to the possibility that some of the elements of this document may be the subject of patent
rights. CEN [and/or CENELEC] shall not be held responsible for identifying any or all such patent rights.
This document supersedes EN 836:1997+A4:2011.
This document has been prepared under a mandate given to CEN by the European Commission and the
European Free Trade Association, and supports essential requirements of EU Directive.
For relationship with EU Directive, see informative Annex ZA, which is an integral part of this document.
According to the CEN-CENELEC Internal Regulations, the national standards organizations of the following
countries are bound to implement this European Standard: Austria, Belgium, Bulgaria, Croatia, Cyprus, Czech
Republic, Denmark, Estonia, Finland, Former Yugoslav Republic of Macedonia, France, Germany, Greece,
Hungary, Iceland, Ireland, Italy, Latvia, Lithuania, Luxembourg, Malta, Netherlands, Norway, Poland, Portugal,
Romania, Slovakia, Slovenia, Spain, Sweden, Switzerland, Turkey and the United Kingdom.
Endorsement notice
The text of ISO 5395-2:2013 has been approved by CEN as EN ISO 5395-2:2013 without any modification.
Annex ZA
(informative)
Relationship between this European Standard and the Essential
Requirements of EU Directive 2006/42/EC on machinery amended by
2009/127/EC
This European Standard has been prepared under a mandate given to CEN by the European Commission
and the European Free Trade Association to provide a means of conforming to Essential Requirements of the
New Approach Directive 2006/42/EC amended by 2009/127/EC.
Once this standard is cited in the Official Journal of the European Union under that Directive and has been
implemented as a national standard in at least one Member State, compliance with the normative clauses of
this standard confers, within the limits of the scope of this standard, a presumption of conformity with the
relevant Essential Requirements of that Directive and associated EFTA regulations.
WARNING — Other requirements and other EU Directives may be applicable to the product(s) falling within
the scope of this standard.
NOTE Compliance with Part 2, together with Part 1, is necessary to achieve presumption of conformity
with the Essential Requirements of Directive 2006/42/EC and associated EFTA regulations.
INTERNATIONAL ISO
STANDARD 5395-2
Second edition
2013-09-01
Garden equipment — Safety
requirements for
combustion-engine-powered
lawnmowers —
Part 2:
Pedestrian-controlled lawnmowers
Matériel de jardinage — Exigences de sécurité pour les tondeuses à
gazon à moteur à combustion interne —
Partie 2: Tondeuses à gazon à conducteur à pied
Reference number
ISO 5395-2:2013(E)
©
ISO 2013
ISO 5395-2:2013(E)
© ISO 2013
All rights reserved. Unless otherwise specified, no part of this publication may be reproduced or utilized otherwise in any form
or by any means, electronic or mechanical, including photocopying, or posting on the internet or an intranet, without prior
written permission. Permission can be requested from either ISO at the address below or ISO’s member body in the country of
the requester.
ISO copyright office
Case postale 56 • CH-1211 Geneva 20
Tel. + 41 22 749 01 11
Fax + 41 22 749 09 47
E-mail copyright@iso.org
Web www.iso.org
Published in Switzerland
ii © ISO 2013 – All rights reserved
ISO 5395-2:2013(E)
Contents Page
Foreword .iv
Introduction .v
1 Scope . 1
2 Normative references . 1
3 Terms and definitions . 2
4 Requirements for pedestrian-controlled lawnmowers . 2
4.1 General . 2
4.2 Controls . 2
4.3 Operator presence control (OPC) . 5
4.4 Handle. 6
4.5 Guards . 8
4.6 Brakes . 8
4.7 Transport position of the cutting-means assembly .10
4.8 Separate fan for grass collection .11
4.9 Hot surfaces .11
4.10 Exhaust fumes .11
4.11 Pressurized components of hydraulic systems .11
4.12 Liquid spillage .12
4.13 Electrical system .12
4.14 Electromagnetic immunity .13
4.15 Noise .13
4.16 Vibration .13
4.17 Additional requirements for a lawnmower with a sulky with a seat .14
5 Particular requirements for pedestrian-controlled rotary lawnmowers .16
5.1 Stopping time of the cutting means .16
5.2 Impact of the cutting means .17
5.3 Cutting-means enclosure .17
5.4 Structural integrity .22
5.5 Thrown objects .23
5.6 Grass catcher . .23
6 Particular requirements for pedestrian-controlled cylinder lawnmowers .23
6.1 Throw line .23
6.2 Cutting-means enclosure .24
6.3 Stopping time of the cutting means .26
7 Information for use .27
7.1 Instruction handbook .
...
Questions, Comments and Discussion
Ask us and Technical Secretary will try to provide an answer. You can facilitate discussion about the standard in here.