EN 10088-4:2009
(Main)Stainless steels - Part 4: Technical delivery conditions for sheet/plate and strip of corrosion resisting steels for construction purposes
Stainless steels - Part 4: Technical delivery conditions for sheet/plate and strip of corrosion resisting steels for construction purposes
1.1 The scope of this part of EN 10088 is to specify the technical delivery conditions for hot or cold rolled sheet/plate and strip of standard and special grades of corrosion resisting stainless steels for construction purposes in addition to the general technical delivery conditions specified in EN 10021.
1.2 This European Standard does not apply to components manufactured by further processing of the product forms listed in 1.1 with quality characteristics altered as a result of such further processing.
Nichtrostende Stähle - Teil 4: Technische Lieferbedingungen für Blech und Band aus korrosionsbeständigen Stählen für das Bauwesen
Dieser Teil der EN 10088 enthält die technischen Lieferbedingungen für warm- oder kaltgewalztes Blech und
Band aus Standardgüten und Sondergüten korrosionsbeständiger nichtrostender Stähle für das Bauwesen in
Ergänzung zu den in EN 10021 festgelegten allgemeinen technischen Lieferbedingungen.
Diese Europäische Norm gilt nicht für die durch Weiterverarbeitung der oben genannten Erzeugnisformen
hergestellten Teile mit fertigungsbedingt abweichenden Gütemerkmalen.
Aciers inoxydables - Partie 4: Conditions techniques de livraison des tôles et bandes en acier résistant à la corrosion pour usage de construction
Le domaine d’application de la présente partie de l’EN 10088 vise à spécifier les conditions techniques de
livraison des tôles/bandes et feuillards laminés à chaud ou à froid, produits dans des nuances standardisées
et dans des nuances spéciales d’aciers inoxydables résistant à la corrosion pour usage de construction, en
plus des conditions générales techniques de livraison spécifiées dans l’EN 10021.
La présente Norme européenne ne s'applique pas aux composants fabriqués par transformation ultérieure
des produits énumérés en 1.1, avec les modifications des caractéristiques de qualité qui en résultent.
Nerjavna jekla - 4. del: Tehnični dobavni pogoji za tanko in debelo pločevino in trakove iz korozijsko odpornih konstrukcijskih jekel
General Information
Standards Content (Sample)
2003-01.Slovenski inštitut za standardizacijo. Razmnoževanje celote ali delov tega standarda ni dovoljeno.Nichtrostende Stähle - Teil 4: Technische Lieferbedingungen für Blech und Band aus korrosionsbeständigen Stählen für das BauwesenAciers inoxydables - Partie 4: Conditions techniques de livraison des tôles et bandes en acier de résistance a la corrosion pour usage de constructionStainless steels - Part 4: Technical delivery conditions for sheet/plate and strip of corrosion resisting steels for construction purposes77.140.50SROL]GHONLFlat steel products and semi-products77.140.20Visokokakovostna jeklaStainless steelsICS:Ta slovenski standard je istoveten z:EN 10088-4:2009SIST EN 10088-4:2009en,fr,de01-julij-2009SIST EN 10088-4:2009SLOVENSKI
STANDARD
SIST EN 10088-4:2009
EUROPEAN STANDARDNORME EUROPÉENNEEUROPÄISCHE NORMEN 10088-4April 2009ICS 77.140.20; 77.140.50 English VersionStainless steels - Part 4: Technical delivery conditions forsheet/plate and strip of corrosion resisting steels for constructionpurposesAciers inoxydables - Partie 4: Conditions techniques delivraison des tôles et bandes en acier résistant à lacorrosion pour usage de constructionNichtrostende Stähle - Teil 4: TechnischeLieferbedingungen für Blech und Band auskorrosionsbeständigen Stählen für das BauwesenThis European Standard was approved by CEN on 21 February 2009.CEN members are bound to comply with the CEN/CENELEC Internal Regulations which stipulate the conditions for giving this EuropeanStandard the status of a national standard without any alteration. Up-to-date lists and bibliographical references concerning such nationalstandards may be obtained on application to the CEN Management Centre or to any CEN member.This European Standard exists in three official versions (English, French, German). A version in any other language made by translationunder the responsibility of a CEN member into its own language and notified to the CEN Management Centre has the same status as theofficial versions.CEN members are the national standards bodies of Austria, Belgium, Bulgaria, Cyprus, Czech Republic, Denmark, Estonia, Finland,France, Germany, Greece, Hungary, Iceland, Ireland, Italy, Latvia, Lithuania, Luxembourg, Malta, Netherlands, Norway, Poland, Portugal,Romania, Slovakia, Slovenia, Spain, Sweden, Switzerland and United Kingdom.EUROPEAN COMMITTEE FOR STANDARDIZATIONCOMITÉ EUROPÉEN DE NORMALISATIONEUROPÄISCHES KOMITEE FÜR NORMUNGManagement Centre:
Avenue Marnix 17,
B-1000 Brussels© 2009 CENAll rights of exploitation in any form and by any means reservedworldwide for CEN national Members.Ref. No. EN 10088-4:2009: ESIST EN 10088-4:2009
EN 10088-4:2009 (E) 2 Contents Page Foreword .3 1 Scope .5 2 Normative references .5 3 Terms and definitions .6 4 Designation and ordering .6 4.1 Designation of steel grades .6 4.2 Order designation .6 5 Classification of grades .7 6 Requirements .8 6.1 Steelmaking process .8 6.2 Delivery condition .8 6.3 Chemical composition .8 6.4 Chemical corrosion properties .8 6.5 Mechanical properties .8 6.6 Surface quality .9 6.7 Internal so
...
SLOVENSKI oSIST prEN 10088-4:2006
PREDSTANDARD
februar 2006
Nerjavna jekla – 4. del: Tehnični dobavni pogoji za tanko in debelo pločevino
in trakove iz nerjavnih konstrukcijskih jekel
Stainless steels - Part 4: Technical delivery conditions for sheet/plate and strip of
corrosion resisting steels for construction purposes
ICS 77.140.20; 77.140.50 Referenčna številka
oSIST prEN 10088-4:2006(en)
© Standard je založil in izdal Slovenski inštitut za standardizacijo. Razmnoževanje ali kopiranje celote ali delov tega dokumenta ni dovoljeno
---------------------- Page: 1 ----------------------
EUROPEAN STANDARD
DRAFT
prEN 10088-4
NORME EUROPÉENNE
EUROPÄISCHE NORM
December 2005
ICS
English Version
Stainless steels - Part 4: Technical delivery conditions for
sheet/plate and strip of corrosion resisting steels for construction
purposes
Aciers inoxydables - Partie 4: Conditions techniques de Nichtrostende Stähle - Teil 4: Technische
livraison des tôles et bandes en acier de résistance à la Lieferbedingungen für Blech und Band aus
corrosion pour usage de construction korrosionsbeständigen Stählen für das Bauwesen
This draft European Standard is submitted to CEN members for enquiry. It has been drawn up by the Technical Committee ECISS/TC 23.
If this draft becomes a European Standard, CEN members are bound to comply with the CEN/CENELEC Internal Regulations which
stipulate the conditions for giving this European Standard the status of a national standard without any alteration.
This draft European Standard was established by CEN in three official versions (English, French, German). A version in any other language
made by translation under the responsibility of a CEN member into its own language and notified to the Management Centre has the same
status as the official versions.
CEN members are the national standards bodies of Austria, Belgium, Cyprus, Czech Republic, Denmark, Estonia, Finland, France,
Germany, Greece, Hungary, Iceland, Ireland, Italy, Latvia, Lithuania, Luxembourg, Malta, Netherlands, Norway, Poland, Portugal, Slovakia,
Slovenia, Spain, Sweden, Switzerland and United Kingdom.
Recipients of this draft are invited to submit, with their comments, notification of any relevant patent rights of which they are aware and to
provide supporting documentation.
Warning : This document is not a European Standard. It is distributed for review and comments. It is subject to change without notice and
shall not be referred to as a European Standard.
EUROPEAN COMMITTEE FOR STANDARDIZATION
COMITÉ EUROPÉEN DE NORMALISATION
EUROPÄISCHES KOMITEE FÜR NORMUNG
Management Centre: rue de Stassart, 36 B-1050 Brussels
© 2005 CEN All rights of exploitation in any form and by any means reserved Ref. No. prEN 10088-4:2005: E
worldwide for CEN national Members.
---------------------- Page: 2 ----------------------
prEN 10088-4:2005 (E)
Contents Page
Foreword.3
1 Scope .4
2 Normative references .4
3 Terms and definitions .5
4 Designation and ordering .6
4.1 Designation of steel grades.6
4.2 Order designation.6
5 Classification of grades .7
6 Requirements.7
6.1 Steelmaking process.7
6.2 Delivery condition.7
6.3 Chemical composition .7
6.4 Chemical corrosion properties.7
6.5 Mechanical properties.
...
Questions, Comments and Discussion
Ask us and Technical Secretary will try to provide an answer. You can facilitate discussion about the standard in here.