EN 1034-27:2012
(Main)Safety of machinery - Safety requirements for the design and construction of paper making and finishing machines - Part 27: Roll handling systems
Safety of machinery - Safety requirements for the design and construction of paper making and finishing machines - Part 27: Roll handling systems
This European Standard applies to roll handling systems for use in paper finishing and applies together with
EN 1034-1:2000+A1:2010. It deals with all significant hazards, hazardous situations and hazardous events relevant to roll handling systems, when they are used as intended and under conditions of misuse which are reasonably foreseeable by the manufacturer (see Clause 4).
This document does not apply to:
- machine reel handling systems;
- stacker trucks, industrial trucks and driverless industrial trucks;
- separate storage systems with cranes and high bay storage systems;
- portable devices for moving rolls.
This document is not applicable to roll handling systems which are manufactured before the date of publication of this document by CEN.
Sicherheit von Maschinen - Sicherheitstechnische Anforderungen an Konstruktion und Bau von Maschinen der Papierherstellung und Ausrüstung - Teil 27: Rollentransportsysteme
Diese Europäische Norm gilt für Rollentransportsysteme, die in der Papierausrüstung verwendet werden, und ist in Verbindung mit EN 1034-1:2000+A1:2010 anzuwenden. Sie behandelt alle signifikanten Gefährdungen, Gefährdungssituationen und Gefährdungsereignisse für Rollentransportsysteme, die bestimmungsgemäß und unter den vom Hersteller vorzusehenden Bedingungen verwendet werden (siehe Abschnitt 4).
Diese Norm gilt nicht für
- Tambourtransportsysteme;
- Stapler, Flurförderzeuge und fahrerlose Flurförderzeuge;
- separate Lagersysteme mit Krane und Hochregallagersysteme;
- manuell geführte Geräte zum Bewegen von Rollen.
Diese Norm gilt nicht für Rollentransportsysteme, die vor dem Datum der Veröffentlichung dieser Europäischen Norm hergestellt wurden.
Sécurité de machines - Prescriptions de sécurité pour la conception et la construction de machines de fabrication et de finition du papier - Partie 27 : Installations pour manutention de bobines
La présente Norme européenne concerne les installations de manutention de bobines utilisées dans la finition du papier et s'applique en conjugaison avec l’EN 1034-1:2000+A1:2010. Elle traite de tous les phénomènes dangereux, situations et événements dangereux significatifs en rapport avec les installations de manutention des bobines lorsque celles-ci sont utilisées comme prévu dans les conditions de mauvais usage raisonnablement prévisible par le fabricant (voir Article 4).
Le présent document ne s'applique pas :
- aux systèmes de manutention des bobines mères de machines,
- aux chariots empileurs, chariots de manutention et chariots de manutention sans conducteur,
- aux installations de stockage indépendantes avec engin de manutention et installations de stockage grande hauteur,
- aux dispositifs portables permettant de déplacer les bobines.
Le présent document ne s’applique pas aux systèmes de manutention des bobines fabriqués avant sa date de publication en tant que norme EN.
Varnost strojev - Varnostne zahteve za načrtovanje in konstrukcijo strojev in opreme za izdelavo papirja - 27. del: Sistemi za ravnanje z zvitki
Ta evropski standard velja za sisteme za ravnanje z zvitki, ki se uporabljajo pri izdelavi papirja, in se uporablja s standardom EN 1034-1:2000+A1:2010. Obravnava vsa večja tveganja, nevarne situacije in nevarne dogodke v zvezi s sistemi za ravnanje z zvitki, kadar se uporabljajo v skladu z njihovim namenom in pod pogoji pričakovane nepravilne uporabe, ki jih je predvidel proizvajalec (gl. točko 4). Ta evropski standard ne velja za: – sisteme za pakiranje kolutov; – vlečne, industrijske tovornjake in za industrijske tovornjake brez voznika; – ločene shranjevalne sisteme z dvigali in visokoregalne shranjevalne sisteme; – prenosne naprave za premikanje zvitkov. Ta evropski standard ne velja za sisteme za ravnanje z zvitki, izdelanimi pred datumom, ko je Evropski odbor za standardizacijo (CEN) objavil ta dokument.
General Information
Standards Content (Sample)
2003-01.Slovenski inštitut za standardizacijo. Razmnoževanje celote ali delov tega standarda ni dovoljeno.LSicherheit von Maschinen - Sicherheitstechnische Anforderungen an Konstruktion und Bau von Maschinen der Papierherstellung und Ausrüstung - Teil 27: RollentransportsystemeSécurité des machines - Prescriptions de sécurité pour la conception et la construction de machines de fabrication et de finition du papier - Partie 27: Installations pour manutention des bobinesSafety of machinery - Safety requirements for the design and construction of paper making and finishing machines - Part 27: Roll handling systems85.100Oprema za papirno industrijoEquipment for the paper industry21.020Characteristics and design of machines, apparatus, equipment13.110Varnost strojevSafety of machineryICS:Ta slovenski standard je istoveten z:EN 1034-27:2012SIST EN 1034-27:2012en01-november-2012SIST EN 1034-27:2012SLOVENSKI
STANDARD
EUROPEAN STANDARD NORME EUROPÉENNE EUROPÄISCHE NORM
EN 1034-27
August 2012 ICS 85.100 English Version
Safety of machinery - Safety requirements for the design and construction of paper making and finishing machines - Part 27: Roll handling systems
Sécurité de machines - Exigences techniques de sécurité pour la conception et la construction de machines de fabrication et de finition du papier - Partie 27: Installations pour manutention de bobines
Sicherheit von Maschinen - Sicherheitstechnische Anforderungen an Konstruktion und Bau von Maschinen der Papierherstellung und Ausrüstung - Teil 27: Rollentransportsysteme This European Standard was approved by CEN on 13 July 2012.
CEN members are bound to comply with the CEN/CENELEC Internal Regulations which stipulate the conditions for giving this European Standard the status of a national standard without any alteration. Up-to-date lists and bibliographical references concerning such national standards may be obtained on application to the CEN-CENELEC Management Centre or to any CEN member.
This European Standard exists in three official versions (English, French, German). A version in any other language made by translation under the responsibility of a CEN member into its own language and notified to the CEN-CENELEC Management Centre has the same status as the official versions.
CEN members are the national standards bodies of Austria, Belgium, Bulgaria, Croatia, Cyprus, Czech Republic, Denmark, Estonia, Finland, Former Yugoslav Republic of Macedonia, France, Germany, Greece, Hungary, Iceland, Ireland, Italy, Latvia, Lithuania, Luxembourg, Malta, Netherlands, Norway, Poland, Portugal, Romania, Slovakia, Slovenia, Spain, Sweden, Switzerland, Turkey and United Kingdom.
EUROPEAN COMMITTEE FOR STANDARDIZATION
COMITÉ EUROPÉEN DE NORMALISATION EUROPÄISCHES KOMITEE FÜR NORMUNG
Management Centre:
Avenue Marnix 17,
B-1000 Brussels © 2012 CEN All rights of exploitation in any form and by any means reserved worldwide for CEN national Members. Ref. No. EN 1034-27:2012: ESIST EN 1034-27:2012
Figures . 24Annex B (informative)
Application of electro-sensitive protective equipment (ESPE) on roll loading (entry) and unloading (exit) areas of paper finishing machines and roll handling systems . 26B.1Muting . 26B.2Partial blanking - Automatic selection of active detection fields . 28Annex C (informative)
Trilingual index of terms . 30Annex ZA (informative)
Relationship between this European Standard and the Essential Requirements of EU Directive 2006/42/EC . 31Bibliography . 32SIST EN 1034-27:2012
Verification of compliance with safety requirements and/or measures. 22Figure A.1 — Example of a reel and roll handling system (picture provided by Metso) . 24 Figure A.2 — Example of a reel and roll handling system (picture provided by Metso) . 25
1 Scope This European Standard applies to roll handling systems for use in paper finishing and applies together with
EN 1034-1:2000+A1:2010. It deals with all significant hazards, hazardous situations and hazardous events relevant to roll handling systems, when they are used as intended and under conditions of misuse which are reasonably foreseeable by the manufacturer (see Clause 4).
This European Standard does not apply to: machine reel handling systems; stacker trucks, industrial trucks and driverless industrial trucks; separate storage systems with cranes and high bay storage systems; portable devices for moving rolls. This European Standard is not applicable to roll handling systems which are manufactured before the date of publication of this document by CEN. 2 Normative references The following documents, in whole or in part, are normatively referenced in this document and are indispensable for its application. For dated references, only the edition cited applies. For undated references, the latest edition of the referenced document (including any amendments) applies. EN 349:1993+A1:2008, Safety of machinery — Minimum gaps to avoid crushing of parts of the human body EN 614-1:2006+A1:2009, Safety of machinery — Ergonomic design principles — Part 1: Terminology and general principles EN 614-2:2000+A1:2008, Safety of machinery — Ergonomic design principles — Part 2: Interaction between the design of machinery and work tasks EN 619:2002+A1:2010, Continuous handling equipment and systems — Safety and EMC requirements for equipment for mechanical handling of unit loads EN 894-1:1997+A1:2008, Safety of machinery — Ergonomic requirements for the design of displays and control actuators — Part 1: General principles for human interactions with displays and control actuators EN 894-2:1997+A1:2008, Safety of machinery — Ergonomic requirements for the design of displays and control actuators — Part 2: Displays EN 953:1997+A1:2009, Safety of machinery — Guards — General requirements for the design and construction of fixed and movable guards EN 1034-1:2000+A1:2010, Safety of machinery — Safety requirements for the design and construction of paper making and finishing machines — Part 1: Common requirements EN 1037:1995+A1:2008, Safety of machinery — Prevention of unexpected start-up EN 1088:1995+A2:2008, Safety of machinery — Interlocking devices associated with guards — Principles for design and selection EN 1525:1997, Safety of industrial trucks — Driverless trucks and their systems SIST EN 1034-27:2012
...
Questions, Comments and Discussion
Ask us and Technical Secretary will try to provide an answer. You can facilitate discussion about the standard in here.