EN 1080:2013

2003-01.Slovenski inštitut za standardizacijo. Razmnoževanje celote ali delov tega standarda ni dovoljeno.Stoßschutzhelme für KleinkinderCasques de protection contre les chocs pour les jeunes enfantsImpact protection helmets for young children97.190Otroška opremaEquipment for children13.340.20Varovalna oprema za glavoHead protective equipmentICS:Ta slovenski standard je istoveten z:EN 1080:2013SIST EN 1080:2013en,fr,de01-april-2013SIST EN 1080:2013SLOVENSKI
STANDARDSIST EN 1080:1998/A2:2006SIST EN 1080:1998/A1:2003SIST EN 1080:19981DGRPHãþD

EUROPEAN STANDARD NORME EUROPÉENNE EUROPÄISCHE NORM
EN 1080
February 2013 ICS 13.340.20; 97.190 Supersedes EN 1080:1997English Version
Impact protection helmets for young children
Casques de protection contre les chocs pour les jeunes enfants
Stoßschutzhelme für Kleinkinder This European Standard was approved by CEN on 7 December 2012.
CEN members are bound to comply with the CEN/CENELEC Internal Regulations which stipulate the conditions for giving this European Standard the status of a national standard without any alteration. Up-to-date lists and bibliographical references concerning such national standards may be obtained on application to the CEN-CENELEC Management Centre or to any CEN member.
This European Standard exists in three official versions (English, French, German). A version in any other language made by translation under the responsibility of a CEN member into its own language and notified to the CEN-CENELEC Management Centre has the same status as the official versions.
CEN members are the national standards bodies of Austria, Belgium, Bulgaria, Croatia, Cyprus, Czech Republic, Denmark, Estonia, Finland, Former Yugoslav Republic of Macedonia, France, Germany, Greece, Hungary, Iceland, Ireland, Italy, Latvia, Lithuania, Luxembourg, Malta, Netherlands, Norway, Poland, Portugal, Romania, Slovakia, Slovenia, Spain, Sweden, Switzerland, Turkey and United Kingdom.
EUROPEAN COMMITTEE FOR STANDARDIZATION
COMITÉ EUROPÉEN DE NORMALISATION EUROPÄISCHES KOMITEE FÜR NORMUNG
Management Centre:
Avenue Marnix 17,
B-1000 Brussels © 2013 CEN All rights of exploitation in any form and by any means reserved worldwide for CEN national Members. Ref. No. EN 1080:2013: ESIST EN 1080:2013

Major changes . 18 Annex ZA (informative)
Relationship between this European Standard and the Essential Requirements of EU Directive 89/686/EEC Personal Protective Equipment . 19 Bibliography . 20
Requirements and the corresponding methods of test are given for the following:  construction including field of vision;  shock absorbing properties;  retention system properties, including chin strap, fastening devices and self-release system;  marking and information. 2 Normative references The following documents, in whole or in part, are normatively referenced in this document and are indispensable for its application. For dated references, only the edition cited applies. For undated references, the latest edition of the referenced document (including any amendments) applies. EN 960, Headforms for use in the testing of protective helmets EN 13087-1:2000, Protective helmets
Test methods
Part 1: Conditions and conditioning EN 13087-2:2012, Protective helmets
Test methods
Part 2: Shock absorption EN 13087-5:2012, Protective helmets
Test methods
Part 5: Retention system strength EN 13087-6, Protective helmets
Test methods
Part 6: Field of vision 3 Terms and definitions For the purposes of this document, the following terms and definitions apply. 3.1 protective helmet item to be worn on the head and intended to absorb the energy of an impact thus reducing the risk of injury to the head 3.2 helmet type category of helmets which does not differ in such essential respects as the materials or dimensions of the helmet shell, the construction of the helmet, the retention system or the protective padding Note1 to entry:
Helmet type may include a range of helmet sizes, provided that the helmet shell, including the protective padding, is the same.
3.3 padding
for a given headform, horizontal plane located at a vertical distance ‘x’ below and parallel to the reference plane Note1 to entry:
This corresponds to the basic plane of the human head being the longitudinal plane which passes through the lower level of the eye orbits and the upper level of the external opening of the ear canals. 3.8 reference plane for a given headform, when erect, horizontal plane located at a vertical distance ‘y’ measured down the central vertical axis from the centre of the crown Note1 to entry:
All horizontal datum levels are quoted relative to this plane. 3.9 test area area of the helmet in which impact tests may be conducted which corresponds to the minimum protected area of the human
...