EN 14853:2005

SLOVENSKI STANDARD
01-februar-2006
Embalaža za aerosole – Preskus vžiga v zaprtem prostoru
Aerosol containers - Enclosed space ignition test
Aerosolverpackungen - Prüfung auf Bildung explosionsfähiger Gemische in einem
geschlossenen Raum
Récipients pour aérosols - Essai d'inflammation en espace clos
Ta slovenski standard je istoveten z: EN 14853:2005
ICS:
13.220.40 Sposobnost vžiga in Ignitability and burning
obnašanje materialov in behaviour of materials and
proizvodov pri gorenju products
55.130 3ORþHYLQNH]DDHURVROH Aerosol containers
2003-01.Slovenski inštitut za standardizacijo. Razmnoževanje celote ali delov tega standarda ni dovoljeno.

EUROPEAN STANDARD
EN 14853
NORME EUROPÉENNE
EUROPÄISCHE NORM
November 2005
ICS 13.230; 55.130
English Version
Aerosol containers - Enclosed space ignition test
Récipients pour aérosol - Essai d'inflammation en espace Aerosolverpackungen - Prüfung auf Bildung
clos explosionsfähiger Gemische in einem geschlossenen
Raum
This European Standard was approved by CEN on 14 October 2005.
CEN members are bound to comply with the CEN/CENELEC Internal Regulations which stipulate the conditions for giving this European
Standard the status of a national standard without any alteration. Up-to-date lists and bibliographical references concerning such national
standards may be obtained on application to the Central Secretariat or to any CEN member.
This European Standard exists in three official versions (English, French, German). A version in any other language made by translation
under the responsibility of a CEN member into its own language and notified to the Central Secretariat has the same status as the official
versions.
CEN members are the national standards bodies of Austria, Belgium, Cyprus, Czech Republic, Denmark, Estonia, Finland, France,
Germany, Greece, Hungary, Iceland, Ireland, Italy, Latvia, Lithuania, Luxembourg, Malta, Netherlands, Norway, Poland, Portugal, Slovakia,
Slovenia, Spain, Sweden, Switzerland and United Kingdom.
EUROPEAN COMMITTEE FOR STANDARDIZATION
COMITÉ EUROPÉEN DE NORMALISATION
EUROPÄISCHES KOMITEE FÜR NORMUNG
Management Centre: rue de Stassart, 36  B-1050 Brussels
© 2005 CEN All rights of exploitation in any form and by any means reserved Ref. No. EN 14853:2005: E
worldwide for CEN national Members.

Contents Page
Foreword .3
1 Scope .4
2 Principle.4
3 Apparatus .4
4 Test conditions .4
5 Preparation of test vessel.4
6 Test procedure .6
7 Methods of evaluation .7
8 Test report .7

Foreword
This document (EN 14853:2005) has been prepared by Technical Committee CEN/TC 261 “Packaging”, the
secretariat of which is held by AFNOR.
This European Standard shall be given the status of a national standard, either by publication of an identical
text or by endorsement, at the latest by May 2006, and conflicting national standards shall be withdrawn at the
latest by May 2006.
This draft European Standard is one of a series of thirteen related standards with the following titles:
EN 14847, Aerosol containers — Tinplate containers — Dimensions of the 25,4 mm aperture.
EN 14848, Aerosol containers — Metal containers with 25,4 mm aperture — Dimensions of valve cups.
EN 14849, Aerosol containers — Glass containers — Dimensions of aerosol valve ferrules.
EN 14850, Aerosol containers — Metal containers with 25,4 mm aperture — Measurement of contact height.
EN 14851, Aerosol containers — Aerosol foam flammability test.
EN 14852, Aerosol containers — Determination of the ignition distance of the spray jet.
EN 14853, Aerosol containers — Enclosed space ignition test.
EN 14854, Aerosol containers — Glass containers — Dimensions of the neck finish
prEN 15006, Metal aerosol containers — Aluminium containers — Dimensions of the 25,4 mm (one inch)
aperture.
prEN 15007, Metal aerosol containers — Tinplate containers — Dimensions of three-piece cans.
prEN 15008, Metal aerosol containers — Dimensions of 1-piece aluminium can with 25,4 mm aperture.
prEN 15009, Aerosol containers — Bicompartmented aerosol containers.
prEN 15010, Aerosol containers — Aluminium containers — Tolerances of the fundamental dimensions in
connection with the clinch.
According to the CEN/CENELEC Internal Regulations, the national standards organizations of the following
countries are bound to implement this European Standard: Austria, Belgium, Cyprus, Czech Republic,
Denmark, Estonia, Finland, France, Germany, Greece, Hungary, Iceland, Ireland, Italy, Latvia, Lithuania,
Luxembourg, Malta, Netherlands, Norway, Poland, Portugal, Slovakia, Slovenia, Spain, Sweden, Switzerland
and United Kingdom.
EN 14853:2
...