80/232/EEC - Ranges of nominal quantities and nominal capacities permitted for certain pre-packaged products

This European Standard specifies the dimensions and volumes for one-piece aluminium aerosol containers with a 25,4 mm aperture.
This European Standard applies to one-piece containers of monobloc construction with an ogival, spherical or flat shoulder.

This European Standard specifies the dimensions of two and three-piece tinplate aerosol containers with nominal brimful capacities.

This European Standard specifies the dimensions and volumes for one-piece aluminium aerosol containers with a 25,4 mm aperture.
This European Standard applies to one-piece containers of monobloc construction with an ogival, spherical or flat shoulder.

This European Standard specifies the dimensions of two and three-piece tinplate aerosol containers with nominal brimful capacities.

ISO 13355:2016 specifies a method to carry out a vertical random vibration test on a complete, filled transport package(s) and unit loads using random excitation[1]. This document also provides methods for assessing the performance of a package in terms of its strength or the protection that it offers to its contents when it is subjected to vertical vibration. The test discussed in this document can be performed either as a single test to investigate the effects of vertical vibration, or as a part of a sequence of tests designed to measure the ability of a test specimen to withstand a distribution system that includes a vibration hazard.
NOTE          In this International Standard, a package or unit load is referred to as test specimen.
[1]   Random vibration theory is discussed in IEC 60068-2-64.

ISO 13355:2016 specifies a method to carry out a vertical random vibration test on a complete, filled transport package(s) and unit loads using random excitation[1]. This document also provides methods for assessing the performance of a package in terms of its strength or the protection that it offers to its contents when it is subjected to vertical vibration. The test discussed in this document can be performed either as a single test to investigate the effects of vertical vibration, or as a part of a sequence of tests designed to measure the ability of a test specimen to withstand a distribution system that includes a vibration hazard.
NOTE          In this International Standard, a package or unit load is referred to as test specimen.
[1]   Random vibration theory is discussed in IEC 60068-2-64.

ISO 780:2015 specifies a set of graphical symbols conventionally used for marking of distribution packages in their physical distribution chain to convey handling instructions. The graphical symbols should be used only when necessary.
ISO 780:2015 is applicable to packages containing any kind of goods, but does not include instructions specific to handling of dangerous goods.

ISO 8317:2015 specifies performance requirements and test methods for reclosable packages designated as resistant to opening by children.
Acceptance criteria are given for the packages when tested by specified methods. These methods not only provide a measure of the effectiveness of the packaging in restricting access by children, but also cover the accessibility to the contents by adults.
ISO 8317:2015 is applicable to reclosable packages for any product intended to be exposed or removed from the packaging in normal use.
ISO 8317:2015 is intended for type approval only and is not intended for quality assurance purposes.

ISO 780:2015 specifies a set of graphical symbols conventionally used for marking of distribution packages in their physical distribution chain to convey handling instructions. The graphical symbols should be used only when necessary.
ISO 780:2015 is applicable to packages containing any kind of goods, but does not include instructions specific to handling of dangerous goods.

ISO 8317:2015 specifies performance requirements and test methods for reclosable packages designated as resistant to opening by children.
Acceptance criteria are given for the packages when tested by specified methods. These methods not only provide a measure of the effectiveness of the packaging in restricting access by children, but also cover the accessibility to the contents by adults.
ISO 8317:2015 is applicable to reclosable packages for any product intended to be exposed or removed from the packaging in normal use.
ISO 8317:2015 is intended for type approval only and is not intended for quality assurance purposes.

Minor Amendment 3 month UAP!

Minor Amendment 3 month UAP!

This European Standard specifies the following dimensions of aluminium metal aerosol cans with 25,4 mm aperture: contact height, outside diameter, inside diameter and shoulder height. It is intended to be used with EN 14848 for clinching with valve cups.

This European Standard specifies the following dimensions of aluminium metal aerosol cans with 25,4 mm aperture: contact height, outside diameter, inside diameter and shoulder height. It is intended to be used with EN 14848 for clinching with valve cups.

CMC - Replace Figure 1a (editorial error)

This European Standard specifies the following dimensions of tinplate metal aerosol cans with 25,4 mm aperture: contact height, outside diameter, inside diameter and shoulder height. It is intended to be used with EN 14848 for clinching with valve cups.

This European Standard describes a method of measuring the contact height of the compression closure between the valve cup and the aperture of an aerosol container.
This standard applies to aerosol containers with 25,4 mm apertures as specified in EN 14847 and prEN 15006 fitted with aerosol valve cups as specified in EN 14848.

This European Standard defines the dimensions which are important for an effective fastening of valves on glass aerosol containers with a nominal diameter of 11 mm, 13 mm, 15 mm, 17 mm, 18 mm and 20 mm neck finish, as defined in EN 14854.

Part 3 of EN  13025 specifies 20 l, 25 l and 30 l nominal capacity, round cylindrical and tapered removable head containers with steel and tinplate thickness not exceeding 0,49 mm.
Recommended dimensions related to this range of nominal filling volumes are shown in Tables 1 and 2 of this European Standard.

This European Standard specifies the range of nominal filling volumes in common use for round cylindrical and tapered general use containers of up to 40 000 ml volumetric capacity, metal thickness not exceeding 0,49 mm nominal.
Recommended diameters related to this range of nominal filling volumes are shown in an Annex A to this European Standard.

Part 2 of EN 13025 specifies 20 l, 25 l and 30 l nominal capacity round cylindrical and tapered non-removable head containers with steel and tinplate thickness not exceeding 0,49 mm.
Recommended dimensions related to this range of nominal filling volumes are shown in Table 1 of this European Standard.

ISO 9100-3:2005 specifies the dimensions of a vacuum lug finish with a nominal size of 38 mm regular for wide-mouth glass containers.

ISO 9100-2:2005 specifies the dimensions of a vacuum lug finish with a nominal size of 33 mm medium for wide-mouth glass containers.

ISO 9100-4:2005 specifies the dimensions of a vacuum lug finish with a nominal size of 38 mm medium for wide-mouth glass containers.

CMC - Replace Figure 1a (editorial error)

This European Standard specifies requirements for crown bottle openers designed for 26 mm crown closures, to suit the glass bottle finishes specified in EN 14634 and EN 14635. It applies to hand-held openers of the aperture type.

Part 3 of EN  13025 specifies 20 l, 25 l and 30 l nominal capacity, round cylindrical and tapered removable head containers with steel and tinplate thickness not exceeding 0,49 mm.
Recommended dimensions related to this range of nominal filling volumes are shown in Tables 1 and 2 of this European Standard.

Part 2 of EN 13025 specifies 20 l, 25 l and 30 l nominal capacity round cylindrical and tapered non-removable head containers with steel and tinplate thickness not exceeding 0,49 mm.
Recommended dimensions related to this range of nominal filling volumes are shown in Table 1 of this European Standard.

This European Standard specifies the range of nominal filling volumes in common use for round cylindrical and tapered general use containers of up to 40 000 ml volumetric capacity, metal thickness not exceeding 0,49 mm nominal.
Recommended diameters related to this range of nominal filling volumes are shown in an Annex A to this European Standard.

ISO 9100-2:2005 specifies the dimensions of a vacuum lug finish with a nominal size of 33 mm medium for wide-mouth glass containers.

ISO 9100-4:2005 specifies the dimensions of a vacuum lug finish with a nominal size of 38 mm medium for wide-mouth glass containers.

This European Standard specifies the following dimensions of tinplate metal aerosol cans with 25,4 mm aperture: contact height, outside diameter, inside diameter and shoulder height. It is intended to be used with EN 14848 for clinching with valve cups.

ISO 9100-3:2005 specifies the dimensions of a vacuum lug finish with a nominal size of 38 mm regular for wide-mouth glass containers.

This European Standard describes a method of measuring the contact height of the compression closure between the valve cup and the aperture of an aerosol container.
This standard applies to aerosol containers with 25,4 mm apertures as specified in EN 14847 and prEN 15006 fitted with aerosol valve cups as specified in EN 14848.

This European Standard specifies requirements for crown bottle openers designed for 26 mm crown closures, to suit the glass bottle finishes specified in EN 14634 and EN 14635. It applies to hand-held openers of the aperture type.

This European Standard defines the dimensions which are important for an effective fastening of valves on glass aerosol containers with a nominal diameter of 11 mm, 13 mm, 15 mm, 17 mm, 18 mm and 20 mm neck finish, as defined in EN 14854.

This document covers the load testing of roll containers and dollies for safety, fitness for purpose and the development of new designs.
All designs, styles and derived forms of roll containers and dollies intended for fitment of sides or not are subject to certain of the tests in Part 3, as stipulated in Part 4. Also included in the scope are roll containers partly made from non-metallic materials, such as plastic or plywood.
Dollies are subject to a more limited range of these tests as stipulated in Part 4.

ISO 9100-6:2005 specifies the dimensions of vacuum lug finishes with nominal sizes of 53 mm and 58 mm regular for wide-mouth glass containers.

ISO 9100-14:2005 specifies the dimensions of a vacuum lug finish with a nominal size of 110 mm regular for wide-mouth glass containers.

ISO 9100-9:2005 specifies the dimensions of vacuum lug finishes with nominal sizes of 63, 66 and 70 mm deep for wide-mouth glass containers.

ISO 9100-12:2005 specifies the dimensions of a vacuum lug finish with a nominal size of 89 mm regular for wide-mouth glass containers.

This document covers the load testing of roll containers and dollies for safety, fitness for purpose and the development of new designs.
All designs, styles and derived forms of roll containers and dollies intended for fitment of sides or not are subject to certain of the tests in Part 3, as stipulated in Part 4. Also included in the scope are roll containers partly made from non-metallic materials, such as plastic or plywood.
Dollies are subject to a more limited range of these tests as stipulated in Part 4.

ISO 9100-11:2005 specifies the dimensions of a vacuum lug finish with a nominal size of 82 mm regular for wide-mouth glass containers.

ISO 9100-8:2005 specifies the dimensions of vacuum lug finishes with nominal sizes of 63, 66 and 70 mm regular for wide-mouth glass containers.