Packaging - Light gauge metal containers - Part 2: Non-removable head (tight head) round steel and tinplate containers with a nominal capacity of 20 000 ml, 25 000 ml and 30 000 ml

Part 2 of EN 13025 specifies 20 l, 25 l and 30 l nominal capacity round cylindrical and tapered non-removable head containers with steel and tinplate thickness not exceeding 0,49 mm.
Recommended dimensions related to this range of nominal filling volumes are shown in Table 1 of this European Standard.

Verpackungen - Feinstblechverpackungen - Teil 2: Spundfässer mit einem Nennvolumen von 20 000 ml, 25 000 ml und 30 000 ml

Teil 2 der EN 13025 legt runde, zylindrische und konische Spundfässer mit einem Nennvolumen von 20 l, 25 l
und 30 l und einer Dicke des Stahls oder Weißblechs von maximal 0,49 mm fest.
Tabelle 1 dieser Europäischen Norm enthält die zu dieser Bandbreite an Nennfüllvolumen empfohlenen Maße.

Emballage - Emballages métalliques légers - Partie 2: Tonnelets à ouverture partielle d'une capacité nominale de 20 000 ml, 25 000 ml et 30 000 ml

La partie 2 de l’EN 13025 spécifie les tonnelets ronds, cylindriques et coniques à ouverture partielle d’une
capacité nominale de 20 l, 25 l et 30 l d’une épaisseur d’acier ou de fer blanc n’excédant pas 0,49 mm.
Les dimensions recommandées se rapportant à cette plage de volumes nominaux de remplissage sont
présentées dans le Tableau 1 de la présente Norme européenne.

Embalaža - Pločevinke - 2. del: Okrogle jeklene pločevinke in pločevinke iz bele pločevine z nesnemljivim pokrovom (ozka odprtina) z nazivno prostornino 20.000 ml, 25.000 ml in 30.000 ml

General Information

Status
Published
Publication Date
01-Nov-2005
Withdrawal Date
30-May-2006
Current Stage
9093 - Decision to confirm - Review Enquiry
Completion Date
26-Jan-2022

Relations

Buy Standard

Standard
EN 13025-2:2006
English language
8 pages
sale 10% off
Preview
sale 10% off
Preview
e-Library read for
1 day

Standards Content (Sample)


SLOVENSKI STANDARD
01-februar-2006
1DGRPHãþD
SIST EN 13025:2001
(PEDODåD3ORþHYLQNHGHO2NURJOHMHNOHQHSORþHYLQNHLQSORþHYLQNHL]EHOH
SORþHYLQH]QHVQHPOMLYLPSRNURYRP R]NDRGSUWLQD ]QD]LYQRSURVWRUQLQR
POPOLQPO
Packaging - Light gauge metal containers - Part 2: Non-removable head (tight head)
round steel and tinplate containers with a nominal capacity of 20 000 ml, 25 000 ml and
30 000 ml
Verpackungen - Feinstblechverpackungen - Teil 2: Spundfässer mit einem Nennvolumen
von 20 000 ml, 25 000 ml und 30 000 ml
Emballage - Emballages métalliques légers - Partie 2: Tonnelets a ouverture partielle
d'une capacité nominale de 20 000 ml, 25 000 ml et 30 000 ml
Ta slovenski standard je istoveten z: EN 13025-2:2005
ICS:
55.120 3ORþHYLQNH7XEH Cans. Tins. Tubes
2003-01.Slovenski inštitut za standardizacijo. Razmnoževanje celote ali delov tega standarda ni dovoljeno.

EUROPEAN STANDARD
EN 13025-2
NORME EUROPÉENNE
EUROPÄISCHE NORM
November 2005
ICS 55.140 Supersedes EN 13025:2000
English Version
Packaging - Light gauge metal containers - Part 2: Non-
removable head (tight head) round steel and tinplate containers
with a nominal capacity of 20 000 ml, 25 000 ml and 30 000 ml
Emballage - Emballages métalliques légers - Partie 2: Verpackungen - Feinstblechverpackungen - Teil 2:
Tonnelets à ouverture partielle d'une capacité nominale de Spundfässer mit einem Nennvolumen von 20 000 ml, 25
20 000 ml, 25 000 ml et 30 000 ml 000 ml und 30 000 ml
This European Standard was approved by CEN on 12 September 2005.
CEN members are bound to comply with the CEN/CENELEC Internal Regulations which stipulate the conditions for giving this European
Standard the status of a national standard without any alteration. Up-to-date lists and bibliographical references concerning such national
standards may be obtained on application to the Central Secretariat or to any CEN member.
This European Standard exists in three official versions (English, French, German). A version in any other language made by translation
under the responsibility of a CEN member into its own language and notified to the Central Secretariat has the same status as the official
versions.
CEN members are the national standards bodies of Austria, Belgium, Cyprus, Czech Republic, Denmark, Estonia, Finland, France,
Germany, Greece, Hungary, Iceland, Ireland, Italy, Latvia, Lithuania, Luxembourg, Malta, Netherlands, Norway, Poland, Portugal, Slovakia,
Slovenia, Spain, Sweden, Switzerland and United Kingdom.
EUROPEAN COMMITTEE FOR STANDARDIZATION
COMITÉ EUROPÉEN DE NORMALISATION
EUROPÄISCHES KOMITEE FÜR NORMUNG
Management Centre: rue de Stassart, 36  B-1050 Brussels
© 2005 CEN All rights of exploitation in any form and by any means reserved Ref. No. EN 13025-2:2005: E
worldwide for CEN national Members.

Contents Page
Foreword.3
1 Scope .4
2 Normative references .4
3 Terms and definitions .4
4 Dimensions.5
5 Material .5
6 Construction.5
7 Finish .5
8 Draining .5
Bibliography .8

Foreword
This European Standard (EN 13025-2:2005) has been prepared by Technical Committee CEN/TC 261
“Packaging”, the secretariat of which is held by AFNOR.
This European Standard shall be given the status of a national standard, either by publication of an identical
text or by endorsement, at the latest by May 2006, and conflicting national standards shall be withdrawn at the
latest by May 2006.
This European Standard supersedes EN 13025:2000.
According to the CEN/CENELEC Internal Regulations, the national standards organizations of the following
countries are bound to implement this European Standard: Austria, Belgium, Cyprus, Czech Republic,
Denmark, Estonia, Finland, France, Germany, Greece, Hungary, Iceland, Ireland, Italy, Latvia, Lithuania,
Luxembourg, Malta, Netherlands, Norway, Poland, Portugal, Slovakia, Slovenia, Spain, Sweden, Switzerland
and United Kingdom.
...

Questions, Comments and Discussion

Ask us and Technical Secretary will try to provide an answer. You can facilitate discussion about the standard in here.