This document specifies the relationship between the nominal volume of product and the maximum nominal brimful capacity of the outer container of the compartmented aerosol dispenser.

  • Standard
    8 pages
    English language
    sale 10% off
    e-Library read for
    1 day

This document specifies the critical dimensions of valve cups suitable for clinching into 25,4 mm aperture metal aerosol containers.
This document is applicable to aperture metal aerosol containers which are used with the metal aerosol containers in accordance with EN 14847 and EN 15006.
This European Standard does not specify dimples on aperture metal aerosol containers.
NOTE   To provide satisfactory filling in production, dimples are no longer considered essential but might still be used. Their presence could cause damage of the 25,4 mm aperture and their presence on lacquered cups can give rise to coating defects at the dimple feature. Thus, in the interest of simplicity and reduction of difficulties, dimples are excluded from this standard.

  • Standard
    9 pages
    English language
    sale 10% off
    e-Library read for
    1 day

This European Standard specifies the dimensions and volumes for one-piece aluminium aerosol containers with a 25,4 mm aperture.
This European Standard applies to one-piece containers of monobloc construction with an ogival, spherical or flat shoulder.

  • Standard
    11 pages
    English language
    sale 10% off
    e-Library read for
    1 day

This European Standard specifies the dimensions of two and three-piece tinplate aerosol containers with nominal brimful capacities.

  • Standard
    9 pages
    English language
    sale 10% off
    e-Library read for
    1 day

This European Standard specifies the dimensions and profile of the aperture for plug-in plastic closures used in round and non-round metal containers of nominal wall thickness equal to or less than 0,49 mm.

  • Standard
    9 pages
    English language
    sale 10% off
    e-Library read for
    1 day

This European Standard specifies the following dimensions of aluminium metal aerosol cans with 25,4 mm aperture: contact height, outside diameter, inside diameter and shoulder height. It is intended to be used with EN 14848 for clinching with valve cups.

  • Standard
    7 pages
    English language
    sale 10% off
    e-Library read for
    1 day

This European Standard defines the critical dimensions of the location of the 25,4 mm aperture relative to the base of aerosol cans for clinching with valve cups.
The specification of the fundamental dimensions in this standard, relates to all 25,4 mm aperture aluminium and aluminium alloy cans, irrespective of size, shape and mode of manufacture; whose dimensions and tolerances fall within the dimensional scope of EN 15008.

  • Standard
    5 pages
    English language
    sale 10% off
    e-Library read for
    1 day

This European Standard defines the dimensions which are important for an effective fastening of valves on glass aerosol containers with a nominal diameter of 11 mm, 13 mm, 15 mm, 17 mm, 18 mm and 20 mm neck finish, as defined in EN 14854.

  • Standard
    6 pages
    English language
    sale 10% off
    e-Library read for
    1 day

This European Standard specifies the following dimensions of tinplate metal aerosol cans with 25,4 mm aperture: contact height, outside diameter, inside diameter and shoulder height. It is intended to be used with EN 14848 for clinching with valve cups.

  • Standard
    8 pages
    English language
    sale 10% off
    e-Library read for
    1 day

This European Standard describes a method of measuring the contact height of the compression closure between the valve cup and the aperture of an aerosol container.
This standard applies to aerosol containers with 25,4 mm apertures as specified in EN 14847 and prEN 15006 fitted with aerosol valve cups as specified in EN 14848.

  • Standard
    10 pages
    English language
    sale 10% off
    e-Library read for
    1 day

Part 3 of EN  13025 specifies 20 l, 25 l and 30 l nominal capacity, round cylindrical and tapered removable head containers with steel and tinplate thickness not exceeding 0,49 mm.
Recommended dimensions related to this range of nominal filling volumes are shown in Tables 1 and 2 of this European Standard.

  • Standard
    8 pages
    English language
    sale 10% off
    e-Library read for
    1 day

Part 2 of EN 13025 specifies 20 l, 25 l and 30 l nominal capacity round cylindrical and tapered non-removable head containers with steel and tinplate thickness not exceeding 0,49 mm.
Recommended dimensions related to this range of nominal filling volumes are shown in Table 1 of this European Standard.

  • Standard
    8 pages
    English language
    sale 10% off
    e-Library read for
    1 day

This European Standard specifies the range of nominal filling volumes in common use for round cylindrical and tapered general use containers of up to 40 000 ml volumetric capacity, metal thickness not exceeding 0,49 mm nominal.
Recommended diameters related to this range of nominal filling volumes are shown in an Annex A to this European Standard.

  • Standard
    9 pages
    English language
    sale 10% off
    e-Library read for
    1 day

The aim of this European standard is to define the nominal filling volumes and the nominal diameters of cans for liquid products with added gas. It is based upon ISO 10654. Light-gauge metal containers defiined by their nominal gross-lidded capacity are the subject of another European Standard.

  • Standard
    6 pages
    English language
    sale 10% off
    e-Library read for
    1 day

The aim of this European standard is to define the range of the capacities of the cans defined by their nominal gross-lidded capacities, their metal thickness not exceeding 0.49 mm. It is based upon ISO 10653:1993. Recommended diameters related to this range of capacities are shown in the Annex A (informative) to this standard. The diameters quoted are as defined in EN 20090/1. Light gauge open-top metal containers for liquid products with added gas defined by their nominal filling volumes are the subject of another European standard.

  • Standard
    8 pages
    English language
    sale 10% off
    e-Library read for
    1 day

This European standard lists the range of nominal filling volumes in common use for rectangular, cylindrical and tapered general use containers of up to 30000 ml nominal volume, metal thickness not exceeding 0.49 mm nominal. Specifically, this standard relates to flat top rectangular containers for liquid products i.e. those containers fitted with an aperture suitable for pouring.

  • Standard
    10 pages
    English language
    sale 10% off
    e-Library read for
    1 day

This European Standard specifies the critical dimensions of the neck finish of glass aerosol containers with respect to the thorough and tight closing of valves with ferrules defined in EN 14849.
This standard is applicable to a nominal diameter of 11 mm, 13 mm, 15 mm, 17 mm, 18 mm and 20 mm necked aerosol containers with moulded and tubular neck finishes.

  • Standard
    5 pages
    English language
    sale 10% off
    e-Library read for
    1 day

This European Standard specifies the relationship between the nominal volume of product and the maximum nominal brimful capacity of the outer container of the compartmented aerosol container.

  • Standard
    8 pages
    English language
    sale 10% off
    e-Library read for
    1 day

TC/CMC - Corrections in the key of Figure 1 and heading row of Table 1 - text inserted byt Ted, sent to confirmation by TC and not checked carefully by TC in E version, as a result, the F + D version translated wrong wording

  • Corrigendum
    2 pages
    English, French and German language
    sale 10% off
    e-Library read for
    1 day

This European Standard specifies the critical dimensions of valve cups suitable for clinching into 25,4 mm aperture metal aerosol containers.
This standard is intended to be used with the metal aerosol containers specified in EN 14847 and prEN 15006.

  • Standard
    7 pages
    English language
    sale 10% off
    e-Library read for
    1 day

TThis European Standard specifies the dimensions and volumes for one-piece aluminium aerosol containers with a 25,4 mm aperture in relation to the capacities fixed by European Directive 80/232/EEC [2].
This standard applies to one-piece containers of monobloc construction with an ogival, spherical or flat shoulder.

  • Standard
    10 pages
    English language
    sale 10% off
    e-Library read for
    1 day

This European Standard specifies the dimensions of two and three-piece tinplate aerosol containers with nominal brimful capacities in accordance with European Directive 80/232/EEC [2].

  • Standard
    8 pages
    English language
    sale 10% off
    e-Library read for
    1 day

This European standard specifies the dimensions and profile of the aperture for plug-in plastic closures used in round and non-round metal containers of nominal thickness equal to or less than 0.49 mm.

  • Standard
    7 pages
    English language
    sale 10% off
    e-Library read for
    1 day

This European Standard specifies a method of determining the flammability of a product emerging from an aerosol dispenser in an enclosed or confined space.

  • Standard
    7 pages
    English language
    sale 10% off
    e-Library read for
    1 day

This European Standard describes the method of determining the flammability of an aerosol product sprayed in the form of a foam, mousse, gel or paste.

  • Standard
    5 pages
    English language
    sale 10% off
    e-Library read for
    1 day

This European Standard describes a method of determining the maximum distance between the orifice of an aerosol container and a flame that results in ignition and sustained combustion of an aerosol spray. The standard applies to aerosol products that have a spray distance of 150 mm or more. It does not apply to aerosol containers fitted with a metering valve.
NOTE   Aerosol products dispensed in the form of a foam, mousse, gel or paste which have a spray distance of less than 150 mm are specified in EN 14851.

  • Standard
    8 pages
    English language
    sale 10% off
    e-Library read for
    1 day