SIST EN ISO 9100-4:2006
(Main)Glass containers - Vacuum lug finishes - Part 4: 38 medium (ISO 9100-4:2005)
Glass containers - Vacuum lug finishes - Part 4: 38 medium (ISO 9100-4:2005)
ISO 9100-4:2005 specifies the dimensions of a vacuum lug finish with a nominal size of 38 mm medium for wide-mouth glass containers.
Glasbehälter - Vakuum-Nockenverschluss-Mündung - Teil 4: 38 medium (ISO 9100-4:2005)
Dieser Teil der ISO 9100 legt die Maße für eine Vakuum-Nockenverschluss-Mündung mit einer Nenngröße von 38 mm medium für Weithals-Glasbehälter fest.
Récipients en verre - Bagues a crans pour bouchage sous vide - Partie 4: 38 medium (ISO 9100-4:2005)
L'ISO 9100-4:2005 spécifie les dimensions des bagues à crans pour bouchage sous vide de cote nominale 38 mm medium, destinées aux récipients en verre à col large.
Steklena embalaža – Grla za vakuumsko zapiranje – 4. del: 38, srednje (ISO 9100-4:2005)
Ta del ISO 9100 opredeljuje mere grla za vakuumsko zapiranje z nominalno velikostjo 38 mm, srednjo za steklene posode s širokim ustjem.
General Information
- Status
- Published
- Publication Date
- 31-Jan-2006
- Technical Committee
- EPO - Packaging - sales and grouped
- Current Stage
- 6060 - National Implementation/Publication (Adopted Project)
- Start Date
- 01-Feb-2006
- Due Date
- 01-Feb-2006
- Completion Date
- 01-Feb-2006
Relations
- Effective Date
- 01-Feb-2010
Overview
EN ISO 9100-4:2005 (ISO 9100-4:2005) defines the dimensional requirements for a vacuum lug finish with a nominal size of 38 mm medium used on wide‑mouth glass containers. This European adoption of the ISO document provides standardized geometry, tolerances and design notes that ensure compatibility between glass jars and vacuum‑lug closures used for vacuum sealing (e.g., food jars, preserves). The standard specifies key diameters, thread/lead geometry and inspection guidance as shown in its figures and Table 1.
Key topics and requirements
- Scope: Dimensions and design of the 38 mm medium vacuum lug finish for wide‑mouth glass containers.
- Critical dimensions: The document gives the principal finish diameters (E and T) with tolerances (e.g., E = 34.75 ±0.35 mm; T = 37.15 ±0.35 mm) and the sealing/closure diameter (C = 27.60 mm) as recorded in Table 1.
- Thread and lead geometry: Specifies cutter/lead angles (α ≈ 10°), thread parameters (thread angle ~12°40′), pitch (25.40 mm = 1 in), and minimum chord dimensions - all important for cap engagement and vacuum function.
- Surface and concentricity: Sealing surface must be free of checks, dips and defects; finish ovality should be minimised and diameters (E and T) should be concentric.
- Mould and tooling guidance: Stop faces on leads must be sharp and perpendicular to the E‑wall; worn mould contours must be replaced to maintain cap‑stopping function and sealing integrity.
- Tolerances: General dimensional tolerances are to be applied in accordance with ISO 2768‑1 where not individually specified.
- Design notes: Cross‑hatched closure position and optional bead/contour guidance are provided to ensure sufficient clearance for closures.
Applications and users
This standard is essential for:
- Glass container designers and manufacturers specifying finish geometry for vacuum‑sealed jars and wide‑mouth containers.
- Closure and cap manufacturers designing vacuum lug closures for compatibility and reliable sealing.
- Packaging engineers and quality teams ensuring interchangeability and leak‑free vacuum packing (food, preserves, cosmetics).
- Tooling/mould makers and production engineers who need the precise cutter, lead and mould contour specifications for manufacturing.
- Procurement and compliance officers requiring standardized specs for supplier contracts.
Using EN ISO 9100-4:2005 helps ensure consistent sealing performance, interchangeability across suppliers and reduced rejects due to poor fit or worn tooling.
Related standards
- ISO 9100 series (other parts cover different nominal sizes and profiles: Parts 1–14).
- ISO 2768‑1 (general tolerances for linear and angular dimensions).
Frequently Asked Questions
SIST EN ISO 9100-4:2006 is a standard published by the Slovenian Institute for Standardization (SIST). Its full title is "Glass containers - Vacuum lug finishes - Part 4: 38 medium (ISO 9100-4:2005)". This standard covers: ISO 9100-4:2005 specifies the dimensions of a vacuum lug finish with a nominal size of 38 mm medium for wide-mouth glass containers.
ISO 9100-4:2005 specifies the dimensions of a vacuum lug finish with a nominal size of 38 mm medium for wide-mouth glass containers.
SIST EN ISO 9100-4:2006 is classified under the following ICS (International Classification for Standards) categories: 55.100 - Bottles. Pots. Jars. The ICS classification helps identify the subject area and facilitates finding related standards.
SIST EN ISO 9100-4:2006 has the following relationships with other standards: It is inter standard links to SIST EN ISO 9100-4:2006/AC:2010. Understanding these relationships helps ensure you are using the most current and applicable version of the standard.
SIST EN ISO 9100-4:2006 is associated with the following European legislation: EU Directives/Regulations: 80/232/EEC, 87/356/EEC. When a standard is cited in the Official Journal of the European Union, products manufactured in conformity with it benefit from a presumption of conformity with the essential requirements of the corresponding EU directive or regulation.
SIST EN ISO 9100-4:2006 is available in PDF format for immediate download after purchase. The document can be added to your cart and obtained through the secure checkout process. Digital delivery ensures instant access to the complete standard document.
Standards Content (Sample)
SLOVENSKI STANDARD
01-februar-2006
Steklena embalaža – Grla za vakuumsko zapiranje – 4. del: 38, srednje (ISO 9100-
4:2005)
Glass containers - Vacuum lug finishes - Part 4: 38 medium (ISO 9100-4:2005)
Glasbehälter - Vakuum-Nockenverschluss-Mündung - Teil 4: 38 medium (ISO 9100-
4:2005)
Récipients en verre - Bagues a crans pour bouchage sous vide - Partie 4: 38 medium
(ISO 9100-4:2005)
Ta slovenski standard je istoveten z: EN ISO 9100-4:2005
ICS:
55.100 Steklenice. Lonci. Kozarci Bottles. Pots. Jars
2003-01.Slovenski inštitut za standardizacijo. Razmnoževanje celote ali delov tega standarda ni dovoljeno.
EUROPEAN STANDARD
EN ISO 9100-4
NORME EUROPÉENNE
EUROPÄISCHE NORM
November 2005
ICS 55.100
English Version
Glass containers - Vacuum lug finishes - Part 4: 38 medium
(ISO 9100-4:2005)
Récipients en verre - Bagues à crans pour bouchage sous Glasbehälter - Vakuum-Nockenverschluss-Mündung - Teil
vide - Partie 4: 38 medium (ISO 9100-4:2005) 4: 38 medium (ISO 9100-4:2005)
This European Standard was approved by CEN on 26 October 2005.
CEN members are bound to comply with the CEN/CENELEC Internal Regulations which stipulate the conditions for giving this European
Standard the status of a national standard without any alteration. Up-to-date lists and bibliographical references concerning such national
standards may be obtained on application to the Central Secretariat or to any CEN member.
This European Standard exists in three official versions (English, French, German). A version in any other language made by translation
under the responsibility of a CEN member into its own language and notified to the Central Secretariat has the same status as the official
versions.
CEN members are the national standards bodies of Austria, Belgium, Cyprus, Czech Republic, Denmark, Estonia, Finland, France,
Germany, Greece, Hungary, Iceland, Ireland, Italy, Latvia, Lithuania, Luxembourg, Malta, Netherlands, Norway, Poland, Portugal, Slovakia,
Slovenia, Spain, Sweden, Switzerland and United Kingdom.
EUROPEAN COMMITTEE FOR STANDARDIZATION
COMITÉ EUROPÉEN DE NORMALISATION
EUROPÄISCHES KOMITEE FÜR NORMUNG
Management Centre: rue de Stassart, 36 B-1050 Brussels
© 2005 CEN All rights of exploitation in any form and by any means reserved Ref. No. EN ISO 9100-4:2005: E
worldwide for CEN national Members.
Foreword
This document (EN ISO 9100-4:2005) has been prepared by Technical Committee CEN/TC 261
"Packaging", the secretariat of which is held by AFNOR, in collaboration with Technical Committee ISO/TC
63 "Glass containers - STAND- BY".
This European Standard shall be given the status of a national standard, either by publication of an identical
text or by endorsement, at the latest by May 2006, and conflicting national standards shall be withdrawn at
the latest by May 2006.
According to the CEN/CENELEC Internal Regulations, the national standards organizations of the following
countries are bound to implement this European Standard: Austria, Belgium, Cyprus, Czech Republic,
Denmark, Estonia, Finland, France, Germany, Greece, Hungary, Iceland, Ireland, Italy, Latvia, Lithuania,
Luxembourg, Malta, Netherlands, Norway, Poland, Portugal, Slovakia, Slovenia, Spain, Sweden, Switzerland
and United Kingdom.
INTERNATIONAL ISO
STANDARD 9100-4
First edition
2005-11-01
Glass containers — Vacuum lug
finishes —
Part 4:
38 medium
Récipients en verre — Bagues à crans pour bouchage sous vide —
Partie 4: 38 medium
Reference number
ISO 9100-4:2005(E)
©
ISO 2005
ISO 9100-4:2005(E)
PDF disclaimer
This PDF file may contain embedded typefaces. In accordance with Adobe's licensing policy, this file may be printed or viewed but
shall not be edited unless the typefaces which are embedded are licensed to and installed on the computer performing the editing. In
downloading this file, parties accept therein the responsibility of not infringing Adobe's licensing policy. The ISO Central Secretariat
accepts no liability in this area.
Adobe is a trademark of Adobe Systems Incorporated.
Details of the software products used to create this PDF file can be found in the General Info relative to the file; the PDF-creation
parameters were optimized for printing. Every care has been taken to ensure that the file is suitable for use by ISO member bodies. In
the unlikely event that a problem relating to it is found, please inform the Central Secretariat at the address given below.
© ISO 2005
All rights reserved. Unless otherwise specified, no part of this publication may be reproduced or utilized in any form or by any means,
electronic or mechanical, including photocopying and microfilm, without permission in writing from either ISO at the address below or
ISO's member body in the country of the requester.
ISO copyright office
Case postale 56 • CH-1211 Geneva 20
Tel. + 41 22 749 01 11
Fax + 41 22 749 09 47
E-mail copyright@iso.org
Web www.iso.org
Published in Switzerland
ii © ISO 2005 – All rights reserved
ISO 9100-4:2005(E)
Foreword
ISO (the International Organization for Standardization) is a worldwide federation of n
...
Questions, Comments and Discussion
Ask us and Technical Secretary will try to provide an answer. You can facilitate discussion about the standard in here.
Loading comments...