EN 14798:2005
(Main)Glass packaging - Hand-held crown bottle openers - Dimensions
Glass packaging - Hand-held crown bottle openers - Dimensions
This European Standard specifies requirements for crown bottle openers designed for 26 mm crown closures, to suit the glass bottle finishes specified in EN 14634 and EN 14635. It applies to hand-held openers of the aperture type.
Verpackungen aus Glas - Manueller Kronenkorköffner - Maße
Diese Europäische Norm legt Anforderungen an Kronenkorköffner für 26-mm-Kronenkorkverschlüsse fest,
passend zu den in den Europäischen Normen EN 14634 und EN 14635 festgelegten Glasflaschen-mundstücken.
Sie gilt für manuelle Öffner mit Aussparung.
Emballage en verre - Décapsuleurs manuels - Spécifications
La présente Norme européenne spécifie les exigences applicables aux décapsuleurs manuels pour
l�ouverture des capsules couronnes de 26 mm adaptées aux bagues de bouteilles en verre spécifiées dans
l�EN 14634 et l�EN 14635. Il est applicable aux décapsuleurs manuels à type d�ouverture à trou.
Steklena embalaža – Ročni odpirači za steklenice s kronskimi pokrovčki - Mere
General Information
Standards Content (Sample)
SLOVENSKI STANDARD
01-februar-2006
6WHNOHQDHPEDODåD±5RþQLRGSLUDþL]DVWHNOHQLFHVNURQVNLPLSRNURYþNL0HUH
Glass packaging - Hand-held crown bottle openers - Dimensions
Verpackungen aus Glas - Manueller Kronenkorköffner - Maße
Emballage en verre - Décapsuleurs manuels - Spécifications
Ta slovenski standard je istoveten z: EN 14798:2005
ICS:
55.100 Steklenice. Lonci. Kozarci Bottles. Pots. Jars
97.180 Razna oprema za dom in Miscellaneous domestic and
trgovino commercial equipment
2003-01.Slovenski inštitut za standardizacijo. Razmnoževanje celote ali delov tega standarda ni dovoljeno.
EUROPEAN STANDARD
EN 14798
NORME EUROPÉENNE
EUROPÄISCHE NORM
October 2005
ICS 55.100; 97.180
English Version
Glass packaging - Hand-held crown bottle openers - Dimensions
Emballage en verre - Décapsuleurs manuels - Verpackungen aus Glas - Manueller Kronenkorköffner -
Spécifications Maße
This European Standard was approved by CEN on 29 August 2005.
CEN members are bound to comply with the CEN/CENELEC Internal Regulations which stipulate the conditions for giving this European
Standard the status of a national standard without any alteration. Up-to-date lists and bibliographical references concerning such national
standards may be obtained on application to the Central Secretariat or to any CEN member.
This European Standard exists in three official versions (English, French, German). A version in any other language made by translation
under the responsibility of a CEN member into its own language and notified to the Central Secretariat has the same status as the official
versions.
CEN members are the national standards bodies of Austria, Belgium, Cyprus, Czech Republic, Denmark, Estonia, Finland, France,
Germany, Greece, Hungary, Iceland, Ireland, Italy, Latvia, Lithuania, Luxembourg, Malta, Netherlands, Norway, Poland, Portugal, Slovakia,
Slovenia, Spain, Sweden, Switzerland and United Kingdom.
EUROPEAN COMMITTEE FOR STANDARDIZATION
COMITÉ EUROPÉEN DE NORMALISATION
EUROPÄISCHES KOMITEE FÜR NORMUNG
Management Centre: rue de Stassart, 36 B-1050 Brussels
© 2005 CEN All rights of exploitation in any form and by any means reserved Ref. No. EN 14798:2005: E
worldwide for CEN national Members.
Contents Page
Foreword .3
1 Scope .4
2 Normative references .4
3 Dimensions.4
4 Material .6
4.1 Elasticity .6
4.2 Resistance to wear.6
5 Use of crown bottle openers.7
6 Marking .8
Bibliography.9
Foreword
This European Standard (EN 14798:2005) has been prepared by Technical Committee CEN/TC 261
“Packaging”, the secretariat of which is held by AFNOR.
This European Standard shall be given the status of a national standard, either by publication of an identical
text or by endorsement, at the latest by April 2006, an
...
Questions, Comments and Discussion
Ask us and Technical Secretary will try to provide an answer. You can facilitate discussion about the standard in here.