iTeh StandardsiTeh Standards
EURUSD
Your shopping cart is empty.
CEN

FprEN 13175

(Main)

LPG Equipment and accessories - Specification and testing for Liquefied Petroleum Gas (LPG) pressure vessel valves and fittings

LPG Equipment and accessories - Specification and testing for Liquefied Petroleum Gas (LPG) pressure vessel valves and fittings

This European Standard specifies minimum requirements for the design and testing of valves, including appropriate fittings, which are connected to mobile or static LPG tanks above 150 litre water capacity. Pressure relief valves and their ancillary equipment,
contents gauges and automotive LPG components are outside the scope of this European Standard.
And,
the 3 ¼" ACME coupling, explore the possibility of the revision being:
- silent on its use;
- excluding its use;
- including its use, or
- developing a possible new thread type.

Flüssiggas-Geräte und -Ausrüstungsteile - Spezifikation und Prüfung von Ventilen und Ausrüstungsteilen von Behältern für Flüssiggas (LPG)

Diese Europäische Norm legt Mindestanforderungen für die Auslegung und Prüfung von Ventilen, einschließlich zugehöriger Ausrüstungsteile fest, die an mobilen oder ortsfesten Behältern für Flüssiggas (LPG, en: Liquefied Petroleum Gas) mit einem Fassungsraum über 150 l angebracht sind. Diese Europäische Norm gilt nicht für Sicherheitsventile und deren Zusatzausrüstung, Füllstandsanzeiger und Bauteile für LPG-Fahrzeuge.
Diese Europäische Norm gilt nicht für Raffinerien oder andere verfahrenstechnische Anlagen.

Équipements pour GPL et leurs accessoires - Spécifications et essais des équipements et accessoires des réservoirs pour gaz de pétrole liquéfié (GPL)

La présente Norme européenne définit les exigences minimales de conception et d’essais pour les équipements et leurs accessoires qui sont raccordés à des réservoirs fixes ou mobiles de GPL dont la capacité en eau est supérieure à 150 l. Les soupapes de sûreté et leurs équipements auxiliaires, les jauges de niveau et les composants pour véhicules GPL sont en dehors du domaine d’application de la présente Norme européenne.
La présente Norme européenne ne s'applique pas aux raffineries ou à d'autres usines de traitement.

Oprema in pribor za utekočinjeni naftni plin (UNP) - Specifikacija in preskušanje ventilov in fitingov za rezervoarje za utekočinjeni naftni plin (UNP)

General Information

Status
Not Published
Publication Date
18-Feb-2013
Withdrawal Date
18-Aug-2013
ICS
23.060.01 - Valves in general
Technical Committee
CEN/TC 286 - Liquefied petroleum gas equipment and accessories
Drafting Committee
CEN/TC 286/WG 2 - Design and manufacture of accessories (valves, gauges, fittings) for LPG pressure vessels designed in WG1
Current Stage
5098 - Decision to abandon - Formal Approval
Start Date
23-May-2013
Completion Date
23-May-2013
Directive
2008/68/EC - Directve 2008/68/EC of the European Parliament and of the council of 24 September 2008 on the inland transport of the dangerous goods
97/23/EC - Directive 97/23/EC of the European Parliament and of the Council of 29 May 1997 on the approximation of the laws of the Member States concerning pressure equipment
Mandate
M/071 - Mandate to CEN for standardization in the field of Pressure equipment
M/086 - Mandate to CEN for standardization in the field of transport of dangerous goods
Ref Project
oSIST prEN 13175:2010 - LPG Equipment and accessories - Specification and testing for Liquefied Petroleum Gas (LPG) tank valves and fittings

Relations

Revises
EN 13175:2003+A2:2007 - LPG equipment and accessories - Specification and testing for Liquefied Petroleum Gas (LPG) tank valves and fittings
Effective Date
19-Jan-2023

Buy Standard

prEN 13175:2010prEN 13175:2010
PreviousNext
Draft
prEN 13175:2010
English language
40 pages
sale 10% off
Preview
sale 10% off
Preview
e-Library read for
1 day

Standards Content (Sample)

SLOVENSKI STANDARD
oSIST prEN 13175:2010
01-september-2010
2SUHPDLQSULERU]DXWHNRþLQMHQLQDIWQLSOLQ 813 =DKWHYHLQSUHVNXãDQMH
YHQWLORYLQSULNOMXþNRY]DSRVRGH]DXWHNRþLQMHQLQDIWQLSOLQ 813
LPG Equipment and accessories - Specification and testing for Liquefied Petroleum Gas
(LPG) tank valves and fittings
Flüssiggas-Geräte und -Ausrüstungsteile - Spezifikation und Prüfung von Ventilen und
Ausrüstungsteilen von Behältern für Flüssiggas (LPG)
Equipements pour GPL et leurs accessoires - Spécifications et essais des équipements
et accessoires des réservoirs pour gaz de pétrole liquéfié (GPL)
Ta slovenski standard je istoveten z: prEN 13175
ICS:
23.020.10 1HSUHPLþQHSRVRGHLQ Stationary containers and
UH]HUYRDUML tanks
23.060.01 Ventili na splošno Valves in general
75.180.01 Oprema za industrijo nafte in Equipment for petroleum and
zemeljskega plina na splošno natural gas industries in
general
oSIST prEN 13175:2010 en,fr,de
2003-01.Slovenski inštitut za standardizacijo. Razmnoževanje celote ali delov tega standarda ni dovoljeno.

---------------------- Page: 1 ----------------------
oSIST prEN 13175:2010

---------------------- Page: 2 ----------------------
oSIST prEN 13175:2010


EUROPEAN STANDARD
DRAFT
prEN 13175
NORME EUROPÉENNE

EUROPÄISCHE NORM

June 2010
ICS 23.060.01 Will supersede EN 13175:2003+A2:2007
English Version
LPG Equipment and accessories - Specification and testing for
Liquefied Petroleum Gas (LPG) tank valves and fittings
Equipements pour GPL et leurs accessoires - Flüssiggas-Geräte und -Ausrüstungsteile - Spezifikation
Spécifications et essais des équipements et accessoires und Prüfung von Ventilen und Ausrüstungsteilen von
des réservoirs pour gaz de pétrole liquéfié (GPL) Behältern für Flüssiggas (LPG)
This draft European Standard is submitted to CEN members for enquiry. It has been drawn up by the Technical Committee CEN/TC 286.

If this draft becomes a European Standard, CEN members are bound to comply with the CEN/CENELEC Internal Regulations which
stipulate the conditions for giving this European Standard the status of a national standard without any alteration.

This draft European Standard was established by CEN in three official versions (English, French, German). A version in any other language
made by translation under the responsibility of a CEN member into its own language and notified to the CEN Management Centre has the
same status as the official versions.

CEN members are the national standards bodies of Austria, Belgium, Bulgaria, Croatia, Cyprus, Czech Republic, Denmark, Estonia,
Finland, France, Germany, Greece, Hungary, Iceland, Ireland, Italy, Latvia, Lithuania, Luxembourg, Malta, Netherlands, Norway, Poland,
Portugal, Romania, Slovakia, Slovenia, Spain, Sweden, Switzerland and United Kingdom.

Recipients of this draft are invited to submit, with their comments, notification of any relevant patent rights of which they are aware and to
provide supporting documentation.

Warning : This document is not a European Standard. It is distributed for review and comments. It is subject to change without notice and
shall not be referred to as a European Standard.


EUROPEAN COMMITTEE FOR STANDARDIZATION
COMITÉ EUROPÉEN DE NORMALISATION

EUROPÄISCHES KOMITEE FÜR NORMUNG

Management Centre: Avenue Marnix 17, B-1000 Brussels
© 2010 CEN All rights of exploitation in any form and by any means reserved Ref. No. prEN 13175:2010: E
worldwide for CEN national Members.

---------------------- Page: 3 ----------------------
oSIST prEN 13175:2010
prEN 13175:2010 (E)
Contents Page
Foreword .4
Introduction .5
1 Scope .6
2 Normative references .6
3 Terms and definitions .7
4 Operating conditions .9
5 Materials . 10
5.1 Environmental . 10
5.2 General .
...

Questions, Comments and Discussion

Ask us and Technical Secretary will try to provide an answer. You can facilitate discussion about the standard in here.

This May Also Interest You

CEN
EN 13175:2019+A1:2020(Main)
LPG Equipment and accessories - Specification and testing for Liquefied Petroleum Gas (LPG) pressure vessel valves and fittings
SIST EN 13175:2019+A1:2020

This document specifies minimum requirements for the design, testing and production testing of valves, including appropriate fittings, which are connected to mobile or static LPG pressure vessels above 150 l water capacity. Pressure relief valves and their ancillary equipment, contents gauges and automotive LPG components are outside the scope of this document.
This document does not apply to refineries or other process plants.

  • Standard
    52 pages
    English language
    sale 10% off
    e-Library read for
    1 day
CEN
EN 13175:2019/prA1:2020(Amendment)
LPG Equipment and accessories - Specification and testing for Liquefied Petroleum Gas (LPG) pressure vessel valves and fittings
SIST EN 13175:2019/oprA1:2020

This document specifies minimum requirements for the design, testing and production testing of valves, including appropriate fittings, which are connected to mobile or static LPG pressure vessels above 150 l water capacity. Pressure relief valves and their ancillary equipment, contents gauges and automotive LPG components are outside the scope of this document.
This document does not apply to refineries or other process plants.

  • Draft
    4 pages
    English language
    sale 10% off
    e-Library read for
    1 day
CEN
EN ISO 8233:2024(Main)
Thermoplastics valves - Torque - Test method (ISO 8233:2024)
SIST EN ISO 8233:2024

This document specifies a test method for the determination of the opening, closing and running torque of thermoplastics valves.
This document is applicable to all types of manually operable thermoplastics valves, with or without actuator, intended to be used for the transport of fluids.
NOTE 1        Examples of valve types tested with this method are in ISO 4437-4, ISO 16135, ISO 16136, ISO 16138, ISO 16139, ISO 16486-4, ISO 21787, EN 1555-4[13] and EN 12201-4 [14].
This document does not specify the relationship between the torque and its possible increase after prolonged use of the valve under a specific working condition or wear/chemical aggression of the materials.
NOTE 2        Concerning the chemical aggression of the materials, a collection of data is reported in ISO/TR 10358 concerning the endurance test necessary to confirm the ability of hand-operated plastics valves to withstand prolonged use with repeated opening and closing operations. Further information is provided in ISO 8659.

  • Standard
    13 pages
    English language
    sale 10% off
    e-Library read for
    1 day
  • Draft
    10 pages
    English language
    sale 10% off
    e-Library read for
    1 day
CEN
EN 12201-4:2024(Main)
Plastics piping systems for water supply, and for drains and sewers under pressure - Polyethylene (PE) - Part 4: Valves for water supply systems
SIST EN 12201-4:2024

This document specifies the characteristics of valves or valve bodies made from polyethylene (PE) for buried and above ground applications, intended for the conveyance of water for human consumption, raw water prior to treatment, drains and sewers under pressure, vacuum sewer systems, and water for other purposes, with the exception of industrial applications.
NOTE 1   For PE components intended for the conveyance of water for human consumption and raw water prior to treatment, attention is drawn to 6.4. Components manufactured for water for other purposes, drains and sewers, and vacuum systems are possibly not suitable for water supply for human consumption.
NOTE 2   Industrial application is covered by EN ISO 15494 [2].
The intended use includes sea outfalls, laid in water and pipes suspended below bridges.
It is applicable to isolating unidirectional and bi-directional valves with spigot ends or electrofusion sockets intended to be fused with PE pipes or fittings conforming to EN 12201-2 and EN 12201-3 respectively.
Valves made from materials other than PE, conforming to the relevant standards can be used in PE piping systems according to EN 12201, provided that they have PE connections for butt fusion or electrofusion ends, conforming to EN 12201-3, or material transition joints (e.g. flanged joints).
NOTE 3   For valves or valve bodies intended for drains and sewers, additional information is given in Clause 9.
It also specifies the test parameters for the test methods referred to in this document.
In conjunction with EN 12201-1, EN 12201 2, EN 12201 3 and EN 12201 5, this document is applicable to PE pipes, fittings and valves, their joints and joints with components of PE and other materials intended to be used under the following conditions:
a)   allowable operating pressure, PFA, up to 25 bar ;
b)   an operating temperature of 20 °C as a reference temperature.
NOTE 4   For applications operating at constant temperature greater than 20 °C and up to 50 °C, see EN 12201-1:2024, Annex A.
The EN 12201 series covers a range of allowable operating pressures and gives requirements concerning colours and additives.
NOTE 5   It is the responsibility of the purchaser or specifier to make the appropriate selections from these aspects, taking into account their particular requirements and any relevant national guidance or regulations and installation practices or codes.
This document covers valves for pipes with a nominal outside diameter dn ≤ 400 mm.

  • Standard
    27 pages
    English language
    sale 10% off
    e-Library read for
    1 day
CEN
EN 19:2023(Main)
Industrial valves - Marking of metallic valves
SIST EN 19:2024

This document specifies the requirements for marking of industrial metallic valves. It defines the method of applying the markings, on the body, on a flange, on an identification plate or any other location.
When specified as a normative reference in a valve product or performance standard, this document is considered in conjunction with the specified requirements of that valve product or performance standard.
The marking requirements for plastic valves are not within the scope of this document.

  • Standard
    14 pages
    English language
    sale 10% off
    e-Library read for
    1 day
CEN
EN ISO 5210:2023(Main)
Industrial valves - Multi-turn valve actuator attachments (ISO 5210:2023)
SIST EN ISO 5210:2023

This document specifies the requirements for the attachment of multi-turn actuators to valves.
Throughout this document, “actuator” can be understood as “actuator and/or gearbox” providing a multi-turn and/or linear output.
It specifies:
—     flange dimensions necessary for the attachment of actuators to industrial valves [see Figure 1 a)] or to intermediate supports [see Figure 1 b)];
—     those driving component dimensions of actuators which are necessary to attach them to the driven components;
—     reference values for torque and thrust for flanges having the dimensions specified in this document.

  • Standard
    28 pages
    English language
    sale 10% off
    e-Library read for
    1 day
CEN
EN ISO 5211:2023(Main)
Industrial valves - Part-turn actuator attachments (ISO 5211:2023)
SIST EN ISO 5211:2023

This document specifies requirements for the attachment of part-turn actuators, with or without gearboxes, to industrial valves.
The attachment of part-turn actuators to control valves in accordance with the requirements of this document is subject to an agreement between the supplier and the purchaser.
This document specifies:
—     flange dimensions necessary for the attachment of part-turn actuators to industrial valves [see Figures 1 a) and 1 c)] or to intermediate supports [see Figures 1 b) and 1 d)];
—     driving component dimensions of part-turn actuators necessary to attach them to the driven components;
—     reference values for torques for interfaces and for couplings having the dimensions specified in this document.
The attachment of the intermediate support to the valve is out of the scope of this document.

  • Standard
    36 pages
    English language
    sale 10% off
    e-Library read for
    1 day
CEN
EN ISO 5117:2023(Main)
Automatic steam traps - Production and performance characteristic tests (ISO 5117:2023)
SIST EN ISO 5117:2023

This document specifies the production and performance relevant test requirements for automatic steam traps used for condensate removal/recovery services for optimized utilization of energy, in refinery, power generation or other general applications where steam is used as a medium of heat transfer.
The tests can be classified as production tests and performance characteristic tests and can be conducted to ensure the correct functioning of a steam trap or to evaluate the performance of a particular design. This document specifies the tests performed relative to each one of these two categories and briefly describes the corresponding test methods.

  • Standard
    39 pages
    English language
    sale 10% off
    e-Library read for
    1 day
CEN
EN 17821:2023(Main)
Building valves - Frost resistant taps for outdoor use (FRT) - General technical specification
SIST EN 17821:2023

This document specifies:
- general construction, performance and material requirements for Frost Resistant Taps for outdoor use (FRT), PN 10.
- the application in the potable water installation with a static pressure of maximum 1,0 MPa (10 bar) and a distribution temperature of maximum 25 °C (PWC).
FRT valves shall consist of the 3 areas shown in Figure 1.
The conditions of use are according to the following Table 1.
The requirements with regard to the potable water quality are specified in national regulations.

  • Standard
    22 pages
    English language
    sale 10% off
    e-Library read for
    1 day
CEN
EN ISO 10497:2022(Main)
Testing of valves - Fire type-testing requirements (ISO 10497:2022)
SIST EN ISO 10497:2023

This document specifies fire type-testing requirements and a fire type-test method for soft- and metal-seated isolation valves with one or more obturators. It is not applicable to the testing requirements for valve actuators other than manually operated gearboxes or similar mechanisms when these form part of the normal valve assembly. Other types of valve actuators (e.g. electrical, pneumatic or hydraulic) can need special protection to operate in the environment considered in this valve test, and the fire testing of such actuators is outside the scope of this document.
This document specifies the measurement and assessment criteria for:
a) through-seat leakage;
b) external leakage;
c) cavity overpressure relief of double-seated valves;
d) operability.
This document specifies the rules whereby the fire-type testing qualification for a valve can be extended to untested sizes, pressure ratings and materials of construction of the same basic design type.
Fire test reports of valves tested according to previous editions of this document are acceptable when submitted together with the full and compliant fire test report as per 6.7 of the edition under which it was tested. Any data missing as required from 6.7 within the fire test report are accepted or rejected at the purchaser’s discretion.
NOTE       For the purposes of this document, the terms “fire type-test” and “fire test” are synonymous.

  • Standard
    26 pages
    English language
    sale 10% off
    e-Library read for
    1 day