EN 1849-2:2019

SLOVENSKI STANDARD
SIST EN 1849-2:2019
01-november-2019
Nadomešča:
SIST EN 1849-2:2010
Hidroizolacijski trakovi - Določevanje debeline in mase na enoto površine - 2. del:
Polimerni in elastomerni trakovi za tesnjenje streh
Flexible sheets for waterproofing - Determination of thickness and mass per unit area -
Part 2: Plastics and rubber sheets for roof waterproofing
Abdichtungsbahnen - Bestimmung der Dicke und der flächenbezogenen Masse - Teil 2:
Kunststof- und Elastomerbahnen für Dachabdichtungen
Feuilles souples d’étanchéité - Détermination de l’épaisseur et de la masse surfacique -
Partie 2 : Feuilles d’étanchéité de toiture plastiques et élastomères
Ta slovenski standard je istoveten z: EN 1849-2:2019
ICS:
91.060.20 Strehe Roofs
91.100.50 Veziva. Tesnilni materiali Binders. Sealing materials
SIST EN 1849-2:2019 en,fr,de
2003-01.Slovenski inštitut za standardizacijo. Razmnoževanje celote ali delov tega standarda ni dovoljeno.

---------------------- Page: 1 ----------------------
SIST EN 1849-2:2019

---------------------- Page: 2 ----------------------
SIST EN 1849-2:2019


EN 1849-2
EUROPEAN STANDARD

NORME EUROPÉENNE

July 2019
EUROPÄISCHE NORM
ICS 91.100.50 Supersedes EN 1849-2:2009
English Version

Flexible sheets for waterproofing - Determination of
thickness and mass per unit area - Part 2: Plastics and
rubber sheets for roof waterproofing
Feuilles souples d'étanchéité - Détermination de Abdichtungsbahnen - Bestimmung der Dicke und der
l'épaisseur et de la masse surfacique - Partie 2 : flächenbezogenen Masse - Teil 2: Kunststoff- und
Feuilles d'étanchéité de toiture plastiques et Elastomerbahnen für Dachabdichtungen
élastomères
This European Standard was approved by CEN on 22 April 2019.

CEN members are bound to comply with the CEN/CENELEC Internal Regulations which stipulate the conditions for giving this
European Standard the status of a national standard without any alteration. Up-to-date lists and bibliographical references
concerning such national standards may be obtained on application to the CEN-CENELEC Management Centre or to any CEN
member.

This European Standard exists in three official versions (English, French, German). A version in any other language made by
translation under the responsibility of a CEN member into its own language and notified to the CEN-CENELEC Management
Centre has the same status as the official versions.

CEN members are the national standards bodies of Austria, Belgium, Bulgaria, Croatia, Cyprus, Czech Republic, Denmark, Estonia,
Finland, Former Yugoslav Republic of Macedonia, France, Germany, Greece, Hungary, Iceland, Ireland, Italy, Latvia, Lithuania,
Luxembourg, Malta, Netherlands, Norway, Poland, Portugal, Romania, Serbia, Slovakia, Slovenia, Spain, Sweden, Switzerland,
Turkey and United Kingdom.





EUROPEAN COMMITTEE FOR STANDARDIZATION
COMITÉ EUROPÉEN DE NORMALISATION

EUROPÄISCHES KOMITEE FÜR NORMUNG

CEN-CENELEC Management Centre: Rue de la Science 23, B-1040 Brussels
© 2019 CEN All rights of exploitation in any form and by any means reserved Ref. No. EN 1849-2:2019 E
worldwide for CEN national Members.

---------------------- Page: 3 ----------------------
SIST EN 1849-2:2019
EN 1849-2:2019 (E)
Contents Page
European foreword. 3
Introduction . 4
1 Scope . 5
2 Normative references . 5
3 Terms and definitions . 5
4 Sampling . 7
5 Determination of thickness . 8
5.1 Principle . 8
5.2 Apparatus . 8
5.2.1 Mechanical measuring device . 8
5.2.2 Optical measuring device .
...