Residential solid fuel burning appliances - Part 2-3: Cookers

This document is applicable to cookers for solid fuel (hand fired residential cookers).
The intended use of the appliances is cooking and space heating in residential buildings. They can be fitted with a boiler (integral part of the appliance containing water to be heated up) for the supply of hot water for central heating systems.
These appliances can burn one or more types of the following solid fuels as specified:
-   wood logs;
-   compressed untreated wood;
-   wood pellets;
-   lignite briquettes;
-   solid mineral fuels;
-   peat briquettes.
This document is not applicable to appliances with fan assisted combustion air or appliances that are mechanically fed.
This document specifies procedures for assessment and verification of constancy of performance (AVCP) of characteristics of solid fuel burning cookers.

Häusliche Feuerstätten für feste Brennstoffe - Teil 2-3: Herde

Dieses Dokument ist anzuwenden auf Herde für feste Brennstoffe (handbeschickte Haushaltsherde).
Der Verwendungszweck der Geräte ist Kochen und Raumheizung in Wohngebäuden. Sie können mit wasserführenden Bauteilen (als feste Bestandteile des Gerätes mit zu erhitzendem Wasser) zur Warmwasserbereitung der Zentralheizung ausgestattet sein.
Diese Geräte können wie angegeben einen oder mehrere der folgenden festen Brennstoffe verfeuern:
-   Scheitholz;
-   Holzbriketts;
-   Holzpellets;
-   Braunkohlebriketts;
-   feste mineralische Brennstoffe;
-   Torfbriketts.
Dieses Dokument gilt nicht für Feuerstätten mit Verbrennungsluftgebläse oder mechanisch beschickte Feuerstätten.
Dieses Dokument legt das Verfahren für die Bewertung und Überprüfung der Leistungsbeständigkeit (AVCP) der Eigenschaften von Raumheizern für feste Brennstoffe fest.

Appareils de chauffage domestiques à combustible solide - Partie 2-3 : Cuisinières

Le présent document s’applique aux cuisinières à combustible solide (cuisinières domestiques à alimentation manuelle).
Les usages prévus des appareils sont la cuisson et le chauffage des locaux dans les bâtiments résidentiels. Ils peuvent être équipés d’un bouilleur (faisant partie intégrante de l’appareil et contenant de l’eau à chauffer) pour fournir de l’eau chaude aux systèmes de chauffage central.
Ces appareils peuvent utiliser un ou plusieurs des types de combustibles solides suivants, comme spécifié :
-   bûches de bois ;
-   bois compressé non traité ;
-   granulés de bois ;
-   briquettes de lignite ;
-   combustibles minéraux solides ;
-   briquettes de tourbe.
Le présent document ne s’applique pas aux appareils équipés d’un ventilateur pour l’alimentation en air de combustion ou aux appareils à alimentation mécanique.
Le présent document spécifie des modes opératoires pour l’évaluation et la vérification de la constance des performances (EVCP) des caractéristiques des cuisinières à combustible solide.

Grelne naprave na trdna goriva za stanovanjske stavbe - 2-3. del: Štedilniki

Ta del 2-3 standarda EN 16510 se uporablja za ročne štedilnike v stanovanjih, katerih primarna funkcija je kuhanje, sekundarna pa zagotavljanje toplote v prostoru, v katerem so nameščeni. Če so opremljeni s kotlom, zagotavljajo tudi sanitarno vodo in/ali centralno ogrevanje. V skladu z navodili proizvajalca je v teh napravah mogoče kuriti eno ali več vrst naslednjih trdnih goriv:
– lesena polena
– stisnjen neobdelan les
– lesne pelete
– trdna mineralna goriva
– šotne brikete.
Ta del 2-3 standarda EN 16510 se ne uporablja za naprave z ventilatorjem za zgorevalni zrak ali naprave z mehanskim kurjenjem.
Ta del 2-3 standarda EN 16510 je sestavni del standarda EN 16510-1 in ga je treba uporabljati v povezavi z njim.

General Information

Status
Published
Publication Date
20-Dec-2022
Current Stage
6060 - Definitive text made available (DAV) - Publishing
Start Date
21-Dec-2022
Due Date
26-Feb-2023
Completion Date
21-Dec-2022

Relations

Buy Standard

Standard
EN 16510-2-3:2023 - BARVE
English language
41 pages
sale 10% off
Preview
sale 10% off
Preview
e-Library read for
1 day

Standards Content (Sample)


SLOVENSKI STANDARD
01-marec-2023
Nadomešča:
SIST EN 12815:2003
SIST EN 12815:2003/A1:2005
SIST EN 12815:2003/A1:2005/AC:2006
SIST EN 12815:2003/A1:2005/AC:2008
SIST EN 12815:2003/AC:2004
SIST EN 12815:2003/AC:2006
Grelne naprave na trdna goriva za stanovanjske stavbe - 2-3. del: Štedilniki
Residential solid fuel burning appliances - Part 2-3: Cookers
Häusliche Heizgeräte für feste Brennstoffe - Teil 2-3: Herde
Equipement de chauffage domestique - Partie 2-3 : Cuisiniéres
Ta slovenski standard je istoveten z: EN 16510-2-3:2022
ICS:
97.040.20 Štedilniki, delovni pulti, Cooking ranges, working
pečice in podobni aparati tables, ovens and similar
appliances
97.100.30 Grelniki na trdo gorivo Solid fuel heaters
2003-01.Slovenski inštitut za standardizacijo. Razmnoževanje celote ali delov tega standarda ni dovoljeno.

EN 16510-2-3
EUROPEAN STANDARD
NORME EUROPÉENNE
December 2022
EUROPÄISCHE NORM
ICS 97.040.20; 97.100.30 Supersedes EN 12815:2001
English Version
Residential solid fuel burning appliances - Part 2-3:
Cookers
Appareils de chauffage domestiques à combustible Häusliche Feuerstätten für feste Brennstoffe - Teil 2-3:
solide - Partie 2-3 : Cuisinières Herde
This European Standard was approved by CEN on 23 October 2022.

CEN members are bound to comply with the CEN/CENELEC Internal Regulations which stipulate the conditions for giving this
European Standard the status of a national standard without any alteration. Up-to-date lists and bibliographical references
concerning such national standards may be obtained on application to the CEN-CENELEC Management Centre or to any CEN
member.
This European Standard exists in three official versions (English, French, German). A version in any other language made by
translation under the responsibility of a CEN member into its own language and notified to the CEN-CENELEC Management
Centre has the same status as the official versions.

CEN members are the national standards bodies of Austria, Belgium, Bulgaria, Croatia, Cyprus, Czech Republic, Denmark, Estonia,
Finland, France, Germany, Greece, Hungary, Iceland, Ireland, Italy, Latvia, Lithuania, Luxembourg, Malta, Netherlands, Norway,
Poland, Portugal, Republic of North Macedonia, Romania, Serbia, Slovakia, Slovenia, Spain, Sweden, Switzerland, Türkiye and
United Kingdom.
EUROPEAN COMMITTEE FOR STANDARDIZATION
COMITÉ EUROPÉEN DE NORMALISATION

EUROPÄISCHES KOMITEE FÜR NORMUNG

CEN-CENELEC Management Centre: Rue de la Science 23, B-1040 Brussels
© 2022 CEN All rights of exploitation in any form and by any means reserved Ref. No. EN 16510-2-3:2022 E
worldwide for CEN national Members.

Contents Page
European foreword . 4
1 Scope . 6
2 Normative references . 6
3 Terms and definitions . 6
4 Characteristics . 7
4.1 Protection of combustible materials . 7
4.2 Carbon monoxide emission (CO) . 8
4.3 Nitrogen oxides (NO ) emissions . 8
x
4.4 Emissions of organic gaseous compounds (OGC) . 9
4.5 Particulate matter (PM) emissions . 9
4.6 Safety and accessibility in use . 10
4.6.1 General . 10
4.6.2 Flue gas outlet temperature at nominal heat output . 10
4.6.3 Flue gas outlet temperature at part load heat output. 10
4.6.4 Minimum flue draught at nominal heat output . 10
4.6.5 Minimum flue draught at part load heat output . 10
4.6.6 Flue gas mass flow at nominal heat output . 11
4.6.7 Flue gas mass flow at part load heat output . 11
4.6.8 Fire safety of installation to the chimney . 11
4.7 Energy economy and heat retention . 11
4.7.1 Space heat output at nominal heat output . 11
4.7.2 Water heat output, if existing at nominal heat output. 11
4.7.3 Efficiency at nominal heat output . 12
4.7.4 Space heat output at part load heat output . 12
4.7.5 Water heat output, if existing at part load heat output . 12
4.7.6 Efficiency at part load heat output . 12
4.7.7 Seasonal space heating efficiency at appliance’s nominal heat output . 12
4.7.8 Energy efficiency . 13
4.7.9 Electric power consumption at nominal heat output, if existing . 13
4.7.10 Electric power consumption at part load heat output, if existing . 13
4.7.11 Standby mode power consumption, if existing . 14
4.8 Environmental sustainability . 14
5 Descriptive features . 15
5.1 Data for potential use with room ventilation systems: type of appliance (in relation
to its tightness to the room) . 15
5.2 Data for the building's statics: appliance's mass . 15
5.3 Materials and construction elements . 15
5.3.1 General . 15
5.3.2 General stresses . 16
5.3.3 Integral boiler or heat exchanger . 16
5.4 Risk of burning fuel falling out . 16
5.5 Temperature rise in the fuel storage . 16
5.6 Temperature rise of the operating components . 16
5.7 Spillage of flue gases into the room . 16
5.7.1 Possible spillage of CO, if relevant for the fuel type. 16
5.7.2 Open operation . 16
5.8 Cleanability . 16
5.8.1 Heating surfaces . 16
5.8.2 Flueways . 16
5.8.3 Ashpan . 17
5.8.4 Bottomgrate . 17
5.8.5 Damper . 17
5.8.6 Fan-cut-out-device . 17
5.9 Strength and leak tightness of boiler shells . 18
6 Assessment and verification of constancy of performance - AVCP . 18
6.1 General . 18
6.2 Assessment of performance . 18
6.2.1 General . 18
6.2.2 Test samples, testing and compliance criteria . 19
6.3 Verification of constancy of performance . 20
6.3.1 Factory production control (FPC) . 20
Annex A (normative) Test methods . 25
A.1 Test environment . 25
A.2 Test assembly . 25
A.3 Measurement equipment. 25
A.4 Test procedures . 25
A.5 Test results . 32
A.6 Calculation methods . 32
A.7 Test report . 32
Annex CA (normative) Browning chart for oven heating test. 36
Annex ZA (informative) Relationship of this European Standard with Regulation (EU) No.
305/2011 . 37
ZA.1 Scope and relevant characteristics . 37
ZA.2 System of Assessment and Verification of Constancy of Performance (AVCP) . 40
ZA.3 Assignment of AVCP tasks . 40

European foreword
This document (EN 16510-2-3:2022) has been prepared by Technical Committee CEN/TC 295
“Residential solid fuel burning appliances”, the secretariat of which is held by BSI.
This European Standard shall be given the status of a national standard, either by publication of an
identical text or by endorsement, at the latest by June 2023, and conflicting national standards shall be
withdrawn at the latest by November 2025.
Attention is drawn to the possibility that some of the elements of this document
...

Questions, Comments and Discussion

Ask us and Technical Secretary will try to provide an answer. You can facilitate discussion about the standard in here.