EN ISO 25649-2:2024

SLOVENSKI STANDARD
oSIST prEN ISO 25649-2:2021
01-december-2021
Plavajoči pripomočki za prosti čas, ki se uporabljajo na vodi in v njej - 2. del:
Informacije za potrošnika (ISO/DIS 25649-2:2021)
Floating leisure articles for use on and in the water - Part 2: Consumer information
(ISO/DIS 25649-2:2021)
Schwimmende Freizeitartikel zum Gebrauch auf und im Wasser - Teil 2:
Verbraucherinformation (ISO/DIS 25649-2:2021)
Articles de loisirs flottants à utiliser sur ou dans l'eau Partie 2: Informations aux
consommateurs (ISO/DIS 25649-2:2021)
Ta slovenski standard je istoveten z: prEN ISO 25649-2
ICS:
97.220.40 Oprema za športe na Outdoor and water sports
prostem in vodne športe equipment
oSIST prEN ISO 25649-2:2021 en,fr,de
2003-01.Slovenski inštitut za standardizacijo. Razmnoževanje celote ali delov tega standarda ni dovoljeno.

oSIST prEN ISO 25649-2:2021
oSIST prEN ISO 25649-2:2021
DRAFT INTERNATIONAL STANDARD
ISO/DIS 25649-2
ISO/TC 83 Secretariat: DIN
Voting begins on: Voting terminates on:
2021-10-01 2021-12-24
Floating leisure articles for use on and in the water —
Part 2:
Consumer information
Articles de loisirs flottants à utiliser sur ou dans l'eau —
Partie 2: Informations aux consommateurs
ICS: 97.020; 97.220.40
THIS DOCUMENT IS A DRAFT CIRCULATED
This document is circulated as received from the committee secretariat.
FOR COMMENT AND APPROVAL. IT IS
THEREFORE SUBJECT TO CHANGE AND MAY
NOT BE REFERRED TO AS AN INTERNATIONAL
STANDARD UNTIL PUBLISHED AS SUCH.
IN ADDITION TO THEIR EVALUATION AS
ISO/CEN PARALLEL PROCESSING
BEING ACCEPTABLE FOR INDUSTRIAL,
TECHNOLOGICAL, COMMERCIAL AND
USER PURPOSES, DRAFT INTERNATIONAL
STANDARDS MAY ON OCCASION HAVE TO
BE CONSIDERED IN THE LIGHT OF THEIR
POTENTIAL TO BECOME STANDARDS TO
WHICH REFERENCE MAY BE MADE IN
Reference number
NATIONAL REGULATIONS.
ISO/DIS 25649-2:2021(E)
RECIPIENTS OF THIS DRAFT ARE INVITED
TO SUBMIT, WITH THEIR COMMENTS,
NOTIFICATION OF ANY RELEVANT PATENT
RIGHTS OF WHICH THEY ARE AWARE AND TO
©
PROVIDE SUPPORTING DOCUMENTATION. ISO 2021

oSIST prEN ISO 25649-2:2021
ISO/DIS 25649-2:2021(E)
© ISO 2021
All rights reserved. Unless otherwise specified, or required in the context of its implementation, no part of this publication may
be reproduced or utilized otherwise in any form or by any means, electronic or mechanical, including photocopying, or posting
on the internet or an intranet, without prior written permission. Permission can be requested from either ISO at the address
below or ISO’s member body in the country of the requester.
ISO copyright office
CP 401 • Ch. de Blandonnet 8
CH-1214 Vernier, Geneva
Phone: +41 22 749 01 11
Email: copyright@iso.org
Website: www.iso.org
Published in Switzerland
ii © ISO 2021 – All rights reserved

oSIST prEN ISO 25649-2:2021
ISO/DIS 25649-2:2021(E)
Contents Page
Foreword .iv
Introduction .vi
1 Scope . 1
2 Normative references . 1
3 Terms and definitions . 1
4 Consumer information . 1
4.1 General . 1
4.2 Consumer information at point of sale (information before buying) . 2
4.2.1 General. 2
4.2.2 General information to be provided . 2
4.3 Information related to preparation for use . 2
4.4 Information related to maintenance, repair and storage . 2
5 Requirements related to printing . 2
5.1 General . 2
5.2 Durability of printings on the product . 2
5.3 Language and letter size for plain text information on the product . 3
5.3.1 Requirements . 3
5.3.2 Testing . 3
6 Product safety label . 3
6.1 General . 3
6.2 General safety sign . 3
6.3 Supplementary safety information symbol . 4
6.3.1 Supplementary safety information symbols related to warnings . 4
6.3.2 Supplementary safety information symbols related to prohibition . 4
6.3.3 Supplementary safety information symbols related to mandatory instruction . 8
6.4 Position of graphical symbols .13
6.4.1 General requirements of supplementary safety information symbol and
safety sign position .13
6.4.2 Specific requirements of supplementary safety information symbols &
safety signs .13
6.5 Colour of supplementary safety information symbols and safety sign .14
6.6 Size of supplementary safety information symbol and safety sign .14
6.7 Allocation of the supplementary safety information symbols .14
7 Instructions .18
7.1 General .18
7.2 Safety information .18
8 Mislabelling.18
Annex A (informative) Array of supplementary safety information symbols and safety signs
(Examples) .19
Annex ZA (informative) Relationship between this European Standard and the safety
requirements of Directives 2001/95/EC aimed to be covered .23
Bibliography .25
oSIST prEN ISO 25649-2:2021
ISO/DIS 25649-2:2021(E)
Foreword
ISO (the International Organization for Standardization) is a worldwide federation of national standards
bodies (ISO member bodies). The work of preparing International Standards is normally carried out
through ISO technical committees. Each member body interested in a subject for which a technical
committee has been established has the right to be represented on that committee. International
organizations, governmental and non-governmental, in liaison with ISO, also take part in the work.
ISO collaborates closely with the International Electrotechnical Commission (IEC) on all matters of
electrotechnical standardization.
The procedures used to develop this document and those intended for its further maintenance are
described in the ISO/IEC Directives, Part 1. In particular, the different approval criteria needed for the
different types of ISO documents should be noted. This document was drafted in accordance with the
editorial rules of the ISO/IEC Directives, Part 2 (see www .iso .org/ directives).
Attention is drawn to the possibility that some of the elements of this document may be the subject of
patent rights. ISO shall not be held responsible for identifying any or all such patent rights. Details of
any patent rights identified during the development of the document will be in the Introduction and/or
on the ISO list of patent declarations received (see www .iso .org/ patents).
Any trade name used in this document is information given for the convenience of users and does not
constitute an endorsement.
For an explanation of the voluntary nature of standards, the meaning of ISO specific terms and
expressions related to conformity assessment, as well as information about ISO's adherence to the
World Trade Organization (WTO) principles in the Technical Barriers to Trade (TBT), see www .iso .org/
iso/ foreword .html.
This document was prepared by Technical Committee ISO/TC 83, Sports and other recreational facilities
and equipment, in collaboration with the European Committee Standardization (CEN) Technical
Committee CEN/TC 136, Sports, playground and other recreational facilities and equipment, in accordance
with the agreement on technical cooperation between ISO and CEN (Vienna Agreement).
This second edition cancels and replaces the first edition (ISO 25649-2:2017), which has been
technically revised.
The main changes compared to the previous edition are as follows:
— The dated references in Clause 2 - Normative references and in the entire document are updated;
— Sub-clause 5.3.1 – Modifications of the requirements regarding test information on the product;
— Clause 6 - Replacement of current graphical symbols by official ISO graphical symbols when existing;
— Clause 6 – Reorganisation of the Clause - positioning "General safety signs" before "supplementary
information symbol" which impact a complete renumbering of all the Figures;
— Sub-clause 6.2.2, Figure 16, modification of the permission;
— Sub-clause 6.2.3, Figure 19 - Key, modification of the recommendation;
— Sub-clause 6.4, addition of a new permission;
— Sub-clause 6.5, enlargement of the requirements;
— Sub-clause 6.7, Updates Tables 1 to 12 according to new figures and the complete renumbering;
— Sub-clause 6.7, Table 1 & Table 2, modifications of the notes;
— Sub-clause 7.1, addition of a new permission;
iv © ISO 2021 – All rights reserved

oSIST prEN ISO 25649-2:2021
ISO/DIS 25649-2:2021(E)
— Addition of an Informative Annex ZA regarding correspondence between this European Standard
and Commission Decision No 2005/323/EC of 21/04/2005.
A list of all parts in the ISO 25649 series can be found on the ISO website.
Any feedback or questions on this document should be directed to the user’s national standards body. A
complete listing of these bodies can be found at www .iso .org/ members .html.
oSIST prEN ISO 25649-2:2021
ISO/DIS 25649-2:2021(E)
Introduction
The safe use of floating leisure articles depends not only on the safety and reliability of the products
in use but also on the adequate knowledge of the consumer/user about the risks related to water
activities. The right information when selecting floating leisure articles is a further important aspect.
Which device can be given to which user? What is the adequate area of use? What performance can be
expect
...