EN 13316:2002
(Main)Tanks for transport of dangerous goods - Service equipment for tanks - Pressure balanced footvalve
Tanks for transport of dangerous goods - Service equipment for tanks - Pressure balanced footvalve
This European Standard covers the pressure balanced footvalve for bottom loading and unloading and specifies the performance requirements, dimensions and tests necessary to verify the compliance of the equipment to this standard.
Tanks für die Beförderung gefährlicher Güter - Bedienungsausrüstung von Tanks - Druckausgeglichenes Bodenventil
Diese Europäische Norm gilt für druckausgeglichene Bodenventile, durch die Tanks von unten be- und entladen werden und legt Leistungsanforderungen, entscheidende Maße sowie Prüfungen fest, die erforderlich sind um nachzuweisen, daß die Ausrüstung der vorliegenden Norm entspricht.
Citernes de transport de matières dangereuses - Equipement de service pour citernes - Clapet de fond à pression compensée
La présente Norme européenne s'applique aux clapets de fond à pression compensée destinés au chargement et au déchargement par le bas et spécifie les exigences de performance, les dimensions et les essais nécessaires pour vérifier la conformité du dispositif à la présente norme.
L'équipement spécifié dans la présente norme est adapté aux produits pétroliers liquides et autres matières dangereuses de la classe 3 de l'ADR - Accord européen relatif au transport international des marchandises dangereuses par route - (liquides inflammables) dont la tension de vapeur ne dépasse pas 110 kPa à 50 °C (y compris l'essence) et qui n'appartiennent à aucune sous-classification des produits toxiques ou corrosifs.
Posode za prevoz nevarnih snovi - Obratovalna oprema za posode - Tlačno izravnan spodnji ventil
General Information
Standards Content (Sample)
2003-01.Slovenski inštitut za standardizacijo. Razmnoževanje celote ali delov tega standarda ni dovoljeno.7ODþQRTanks für die Beförderung gefährlicher Güter - Bedienungsausrüstung von Tanks - Druckausgeglichenes BodenventilCiternes de transport de matieres dangereuses - Equipement de service pour citernes - Clapet de fond a pression compenséeTanks for transport of dangerous goods - Service equipment for tanks - Pressure balanced footvalve23.060.20Zapirni ventili (kroglasti in pipe)Ball and plug valves23.020.20Posode in vsebniki, montirani na vozilaVessels and containers mounted on vehicles13.300Varstvo pred nevarnimi izdelkiProtection against dangerous goodsICS:Ta slovenski standard je istoveten z:EN 13316:2002SIST EN 13316:2003en01-december-2003SIST EN 13316:2003SLOVENSKI
STANDARD
EUROPEAN STANDARDNORME EUROPÉENNEEUROPÄISCHE NORMEN 13316November 2002ICS 13.300; 23.020.20; 23.060.20English versionTanks for transport of dangerous goods - Service equipment fortanks - Pressure balanced footvalveCiternes de transport de matières dangereuses -Equipement de service pour citernes - Clapet de fond àpression compenséeTanks für die Beförderung gefährlicher Güter -Bedienungsausrüstung von Tanks - DruckausgeglichenesBodenventilThis European Standard was approved by CEN on 31 August 2002.CEN members are bound to comply with the CEN/CENELEC Internal Regulations which stipulate the conditions for giving this EuropeanStandard the status of a national standard without any alteration. Up-to-date lists and bibliographical references concerning such nationalstandards may be obtained on application to the Management Centre or to any CEN member.This European Standard exists in three official versions (English, French, German). A version in any other language made by translationunder the responsibility of a CEN member into its own language and notified to the Management Centre has the same status as the officialversions.CEN members are the national standards bodies of Austria, Belgium, Czech Republic, Denmark, Finland, France, Germany, Greece,Iceland, Ireland, Italy, Luxembourg, Malta, Netherlands, Norway, Portugal, Spain, Sweden, Switzerland and United Kingdom.EUROPEAN COMMITTEE FOR STANDARDIZATIONCOMITÉ EUROPÉEN DE NORMALISATIONEUROPÄISCHES KOMITEE FÜR NORMUNGManagement Centre: rue de Stassart, 36
B-1050 Brussels© 2002 CENAll rights of exploitation in any form and by any means reservedworldwide for CEN national Members.Ref. No. EN 13316:2002 ESIST EN 13316:2003
Footvalve to tank mounting flange dimensions.12Annex B (normative)
Footvalve run-off flange dimensions.13Annex C (normative)
Footvalve run-off flange dimensions (square).14Annex D (normative)
Break-away test positions.15Annex E (informative)
Break-away test apparatus.16SIST EN 13316:2003
...
Questions, Comments and Discussion
Ask us and Technical Secretary will try to provide an answer. You can facilitate discussion about the standard in here.