EN 13523-18:2002
(Main)Coil coated metals - Test methods - Part 18: Resistance to staining
Coil coated metals - Test methods - Part 18: Resistance to staining
This Part of EN 13523 specifies test procedures for assessing the effect of chemicals on the characteristics of an organic coating on a metallic substrate. It covers testing by using defined substances and to assess the change in characteristics such as discoloration, change in gloss, blistering, softening, swelling and loss of adhesion. Assessment of other phenomena may be agreed between the interested parties.
Bandbeschichtete Metalle - Prüfverfahren - Teil 18: Beständigkeit gegen Fleckenbildung
Dieser Teil von EN 13523 beschreibt Verfahren, mit denen der Einfluss von Chemikalien auf die Eigenschaften einer organischen Beschichtung auf einem metallischen Substrat abgeschätzt werden kann. Er schließt die Prüfung mit definierten Substanzen und die Bewertung von Eigenschaftsänderungen wie Verfärbung, Glanzänderung, Blasenbildung, Erweichen, Quellen und Haftfestigkeitsverlust ein. Andere Phänomene dürfen nach Vereinbarung zwischen den Vertragspartnern bewertet werden.
Tôles prélaquées - Méthodes d'essai - Partie 18 : Résistance aux taches
La présente partie de l'EN 13523 spécifie des méthodes d'évaluation de l'incidence des produits chimiques sur les caractéristiques d'un revêtement organique appliqué sur un support métallique. Elle couvre les essais effectués avec des substances définies afin d'évaluer les changements de caractéristiques (décoloration, changement de brillant, cloquage, ramollissement, gonflement et perte d'adhérence). L'évaluation d'autres phénomènes peut faire l'objet d'un accord entre les parties.
Kovine, zaščitene po postopku coil-coating - Metode preskušanja - 18. del: Odpornost proti nastanku madežev
General Information
- Status
- Withdrawn
- Publication Date
- 16-Jul-2002
- Withdrawal Date
- 20-Jan-2026
- Technical Committee
- CEN/TC 139 - Paints and varnishes
- Drafting Committee
- CEN/TC 139/WG 9 - Testing of coil coated metals
- Current Stage
- 9960 - Withdrawal effective - Withdrawal
- Start Date
- 03-Jun-2020
- Completion Date
- 28-Jan-2026
Relations
- Effective Date
- 10-Jun-2020
- Effective Date
- 28-Jan-2026
- Effective Date
- 28-Jan-2026
- Referred By
EN ISO 4375:2004 - Hydrometric determinations - Cableway systems for stream gauging (ISO 4375:2000) - Effective Date
- 28-Jan-2026
Get Certified
Connect with accredited certification bodies for this standard
National Aerospace and Defense Contractors Accreditation Program (NADCAP)
Global cooperative program for special process quality in aerospace.
CARES (UK Certification Authority for Reinforcing Steels)
UK certification for reinforcing steels and construction.
DVS-ZERT GmbH
German welding certification society.
Sponsored listings
Frequently Asked Questions
EN 13523-18:2002 is a standard published by the European Committee for Standardization (CEN). Its full title is "Coil coated metals - Test methods - Part 18: Resistance to staining". This standard covers: This Part of EN 13523 specifies test procedures for assessing the effect of chemicals on the characteristics of an organic coating on a metallic substrate. It covers testing by using defined substances and to assess the change in characteristics such as discoloration, change in gloss, blistering, softening, swelling and loss of adhesion. Assessment of other phenomena may be agreed between the interested parties.
This Part of EN 13523 specifies test procedures for assessing the effect of chemicals on the characteristics of an organic coating on a metallic substrate. It covers testing by using defined substances and to assess the change in characteristics such as discoloration, change in gloss, blistering, softening, swelling and loss of adhesion. Assessment of other phenomena may be agreed between the interested parties.
EN 13523-18:2002 is classified under the following ICS (International Classification for Standards) categories: 17.040.20 - Properties of surfaces; 25.220.60 - Organic coatings. The ICS classification helps identify the subject area and facilitates finding related standards.
EN 13523-18:2002 has the following relationships with other standards: It is inter standard links to EN 13523-18:2020, EN 13523-0:2001, EN 23270:1991, EN ISO 4375:2004. Understanding these relationships helps ensure you are using the most current and applicable version of the standard.
EN 13523-18:2002 is available in PDF format for immediate download after purchase. The document can be added to your cart and obtained through the secure checkout process. Digital delivery ensures instant access to the complete standard document.
Standards Content (Sample)
2003-01.Slovenski inštitut za standardizacijo. Razmnoževanje celote ali delov tega standarda ni dovoljeno.Bandbeschichtete Metalle - Prüfverfahren - Teil 18: Beständigkeit gegen FleckenbildungTôles prélaquées - Méthodes d'essai - Partie 18 : Résistance aux tachesCoil coated metals - Test methods - Part 18: Resistance to staining25.220.60Organske prevlekeOrganic coatings17.040.20Lastnosti površinProperties of surfacesICS:Ta slovenski standard je istoveten z:EN 13523-18:2002SIST EN 13523-18:2003en01-januar-2003SIST EN 13523-18:2003SLOVENSKI
STANDARD
EUROPEAN STANDARDNORME EUROPÉENNEEUROPÄISCHE NORMEN 13523-18July 2002ICS 17.040.20; 25.220.60English versionCoil coated metals - Test methods - Part 18: Resistance tostainingTôles prélaquées - Méthodes d'essai - Partie 18:Résistance aux tâchesBandbeschichtete Metalle - Prüfverfahren - Teil 18:Beständigkeit gegen FleckenbildungThis European Standard was approved by CEN on 11 April 2002.CEN members are bound to comply with the CEN/CENELEC Internal Regulations which stipulate the conditions for giving this EuropeanStandard the status of a national standard without any alteration. Up-to-date lists and bibliographical references concerning such nationalstandards may be obtained on application to the Management Centre or to any CEN member.This European Standard exists in three official versions (English, French, German). A version in any other language made by translationunder the responsibility of a CEN member into its own language and notified to the Management Centre has the same status as the officialversions.CEN members are the national standards bodies of Austria, Belgium, Czech Republic, Denmark, Finland, France, Germany, Greece,Iceland, Ireland, Italy, Luxembourg, Malta, Netherlands, Norway, Portugal, Spain, Sweden, Switzerland and United Kingdom.EUROPEAN COMMITTEE FOR STANDARDIZATIONCOMITÉ EUROPÉEN DE NORMALISATIONEUROPÄISCHES KOMITEE FÜR NORMUNGManagement Centre: rue de Stassart, 36
B-1050 Brussels© 2002 CENAll rights of exploitation in any form and by any means reservedworldwide for CEN national Members.Ref. No. EN 13523-18:2002 ESIST EN 13523-18:2003
...
Questions, Comments and Discussion
Ask us and Technical Secretary will try to provide an answer. You can facilitate discussion about the standard in here.
Loading comments...