FprEN 13454-1

SLOVENSKI STANDARD
01-september-2017
Veziva in industrijsko pripravljene mešanice za estrihe na osnovi kalcijevega
sulfata - 1. del: Definicije in zahteve
Binders and factory made mixtures for floor screeds based on calcium sulphate - Part 1:
Definitions and requirements
Calciumsulfat-Binder und Werkmörtel für Estriche - Teil 1: Begriffe und Anforderungen
Liants et mélanges fabriqués en usine à base de sulfate de calcium pour chapes de sol -
Partie 1 : Définitions et exigences
Ta slovenski standard je istoveten z: prEN 13454-1
ICS:
01.040.91 Gradbeni materiali in gradnja Construction materials and
(Slovarji) building (Vocabularies)
91.100.10 Cement. Mavec. Apno. Malta Cement. Gypsum. Lime.
Mortar
91.100.50 Veziva. Tesnilni materiali Binders. Sealing materials
2003-01.Slovenski inštitut za standardizacijo. Razmnoževanje celote ali delov tega standarda ni dovoljeno.

DRAFT
EUROPEAN STANDARD
prEN 13454-1
NORME EUROPÉENNE
EUROPÄISCHE NORM
July 2017
ICS 01.040.91; 91.100.10; 91.100.50 Will supersede EN 13454-1:2004
English Version
Binders and factory made mixtures for floor screeds based
on calcium sulphate - Part 1: Definitions and requirements
Liants et mélanges fabriqués en usine à base de sulfate Calciumsulfat-Binder und Werkmörtel für Estriche -
de calcium pour chapes de sol - Partie 1 : Définitions et Teil 1: Begriffe und Anforderungen
exigences
This draft European Standard is submitted to CEN members for enquiry. It has been drawn up by the Technical Committee
CEN/TC 241.
If this draft becomes a European Standard, CEN members are bound to comply with the CEN/CENELEC Internal Regulations
which stipulate the conditions for giving this European Standard the status of a national standard without any alteration.

This draft European Standard was established by CEN in three official versions (English, French, German). A version in any other
language made by translation under the responsibility of a CEN member into its own language and notified to the CEN-CENELEC
Management Centre has the same status as the official versions.

CEN members are the national standards bodies of Austria, Belgium, Bulgaria, Croatia, Cyprus, Czech Republic, Denmark, Estonia,
Finland, Former Yugoslav Republic of Macedonia, France, Germany, Greece, Hungary, Iceland, Ireland, Italy, Latvia, Lithuania,
Luxembourg, Malta, Netherlands, Norway, Poland, Portugal, Romania, Serbia, Slovakia, Slovenia, Spain, Sweden, Switzerland,
Turkey and United Kingdom.
Recipients of this draft are invited to submit, with their comments, notification of any relevant patent rights of which they are
aware and to provide supporting documentation.

Warning : This document is not a European Standard. It is distributed for review and comments. It is subject to change without
notice and shall not be referred to as a European Standard.

EUROPEAN COMMITTEE FOR STANDARDIZATION
COMITÉ EUROPÉEN DE NORMALISATION

EUROPÄISCHES KOMITEE FÜR NORMUNG

CEN-CENELEC Management Centre: Avenue Marnix 17, B-1000 Brussels
© 2017 CEN All rights of exploitation in any form and by any means reserved Ref. No. prEN 13454-1:2017 E
worldwide for CEN national Members.

prEN 13454-1:2017 (E)
Contents Page
European foreword . 4
1 Scope . 5
2 Normative references . 5
3 Terms and definitions . 5
4 Types of binders and factory made mixtures . 6
4.1 Calcium sulphate binders (CAB) . 6
4.2 Calcium sulphate binders for flowing mixtures (CAB-F) . 6
4.3 Calcium sulphate composite binders (CAC). 6
4.4 Calcium sulphate composit binders for flowing mixtures (CAC-F) . 6
4.5 Factory made mixtures (CA) . 7
5 Requirements for binders . 7
5.1 General . 7
5.1.1 Reaction to fire . 7
5.1.2 Dangerous substances . 7
5.2 Content of calcium sulphate (CaSO ) . 7
5.3 pH-value . 7
5.4 Setting time . 7
5.5 Strength . 8
5.6 Shrinkage and swelling . 8
6 Requirements for factory made mixtures . 8
6.1 General . 8
6.2 Reaction to fire . 8
6.3 Dangerous substances . 8
6.4 Water vapour permeability . 8
6.5 Impact sound insulation . 8
6.6 Thermal resistance . 9
6.7 Chemical resistance . 9
6.8 pH-value . 9
6.9 Consistency . 9
6.9.1 General . 9
6.9.2 Flowing mixtures . 9
6.9.3 Highly plastic mixtures . 9
6.9.4 Stiff mixtures. 9
6.10 Working time . 9
6.11 Strength . 10
6.11.1 Compressive strength . 10
6.11.2 Flexural strength . 10
6.12 Shrinkage and swelling . 10
6.13 Other characteristics . 10
7 Assessment and verification of constancy of performance — AVCP . 11
7.1 General . 11
7.2 Type testing . 11
7.2.1 General . 11
7.2.2 Test samples, testing and compliance criteria . 12
prEN 13454-1:2017 (E)
7.2.3 Test reports . 12
7.2.4 Shared other party results . 12
7.2.5 Cascading determination of the product type results . 13
7.3 Factory production control (FPC) . 14
7.3.1 General . 14
7.3.2 Requirements . 15
7.3.3 Product specific requirements . 17
7.3.4 Initial inspection of factory and of FPC . 18
7.3.5 Continuous surveillance of FPC (only for products covered by AVCP system 1+, 1 and
2+) . 18
7.3.6 Procedure for modifications . 18
7.3.7 One-off products, pre-production products (e.g. prototypes) and products produced
in very low quantity . 19
8 Designation . 19
9 Marking, labelling and packaging . 20
9.1 Binders . 20
9.2 Factory made mixtures . 21
10 Conformity criteria and assessment procedure . 22
10.1 General . 22
10.2 Statistical conformity criteria . 22
10.2.1 General . 22
10.2.2 Inspection by variables . 23
10.2.3 Inspection by attributes . 24
10.3 Assessment based on individual results for factory made mixtures . 25
10.4 Conformity requirements . 25
Annex ZA (informative) Relationship of this European Standard with Regulation
(EU) No. 305/2011 . 27
ZA.1 Scope and relevant characteristics . 27
ZA.2 System of Assessment and Verification of Constancy of Performance (AVCP) .
...