EN 10217-4:2002

2003-01.Slovenski inštitut za standardizacijo. Razmnoževanje celote ali delov tega standarda ni dovoljeno.WHPSHUDWXUDKGeschweißte Stahlrohre für Druckbeanspruchungen - Technische Lieferbedingungen - Teil 4: Elektrisch geschweißte Rohre aus unlegierten Stählen mit festgelegten Eigenschaften bei tiefen TemperaturenTubes soudés en acier pour service sous pression - Conditions techniques de livraison - Partie 4: Tubes soudés électriquement en acier non allié avec caractéristiques spécifiées a basse températureWelded steel tubes for pressure purposes - Technical delivery conditions - Part 4: Electric welded non-alloy steel tubes with specified low temperature properties77.140.75Jeklene cevi in cevni profili za posebne nameneSteel pipes and tubes for specific use23.020.30MHNOHQNHPressure vessels, gas cylindersICS:Ta slovenski standard je istoveten z:EN 10217-4:2002SIST EN 10217-4:2003en01-april-2003SIST EN 10217-4:2003SLOVENSKI
STANDARD
EUROPEAN STANDARDNORME EUROPÉENNEEUROPÄISCHE NORMEN 10217-4May 2002ICS 23.040.10; 77.140.75English versionWelded steel tubes for pressure purposes - Technical deliveryconditions - Part 4: Electric welded non-alloy steel tubes withspecified low temperature propertiesTubes soudés en acier pour service sous pression -Conditions techniques de livraison - Partie 4: Tubes soudésélectriquement en acier non allié avec caractéristiquesspécifiées à basse températureGeschweißte Stahlrohre für Druckbeanspruchungen -Technische Lieferbedingungen - Teil 4: Elektrischgeschweißte Rohre aus unlegierten Stählen mitfestgelegten Eigenschaften bei tiefen TemperaturenThis European Standard was approved by CEN on 25 April 2002.CEN members are bound to comply with the CEN/CENELEC Internal Regulations which stipulate the conditions for giving this EuropeanStandard the status of a national standard without any alteration. Up-to-date lists and bibliographical references concerning such nationalstandards may be obtained on application to the Management Centre or to any CEN member.This European Standard exists in three official versions (English, French, German). A version in any other language made by translationunder the responsibility of a CEN member into its own language and notified to the Management Centre has the same status as the officialversions.CEN members are the national standards bodies of Austria, Belgium, Czech Republic, Denmark, Finland, France, Germany, Greece,Iceland, Ireland, Italy, Luxembourg, Malta, Netherlands, Norway, Portugal, Spain, Sweden, Switzerland and United Kingdom.EUROPEAN COMMITTEE FOR STANDARDIZATIONCOMITÉ EUROPÉEN DE NORMALISATIONEUROPÄISCHES KOMITEE FÜR NORMUNGManagement Centre: rue de Stassart, 36
B-1050 Brussels© 2002 CENAll rights of exploitation in any form and by any means reservedworldwide for CEN national Members.Ref. No. EN 10217-4:2002 ESIST EN 10217-4:2003

Testing.2511.13Retests, sorting and reprocessing.2512Marking.2512.1Marking to be applied.2512.2Additional marking.2613protection.26Annex ZA (informative).27Bibliography.28SIST EN 10217-4:2003

European Standard series covering tubes for pressure purposes is:EN 10216:Seamless
steel tubes for pressure purposes.According to the CEN/CENELEC Internal Regulations, the national standards organizations of the followingcountries are bound to implement this European Standard: Austria, Belgium, Czech Republic, Denmark,Finland, France, Germany, Greece, Iceland, Ireland, Italy, Luxembourg, Malta, Netherlands, Norway,Portugal, Spain, Sweden, Switzerland and the United Kingdom.SIST EN 10217-4:2003
...