EN 10217-2:2002

2003-01.Slovenski inštitut za standardizacijo. Razmnoževanje celote ali delov tega standarda ni dovoljeno.Geschweißte Stahlrohre für Druckbeanspruchungen - Technische Lieferbedingungen - Teil 2: Elektrisch geschweißte Rohre aus unlegierten und legierten Stählen mit festgelegten Eigenschaften bei erhöhten TemperaturenTubes soudés en acier pour service sous pression - Conditions techniques de livraison - Partie 2: Tubes soudés électriquement en acier non allié et allié avec caractéristiques spécifiées a température élevéeWelded steel tubes for pressure purposes - Technical delivery conditions - Part 2: Electric welded non-alloy and alloy steel tubes with specified elevated temperature properties77.140.75Jeklene cevi in cevni profili za posebne nameneSteel pipes and tubes for specific use23.020.30MHNOHQNHPressure vessels, gas cylindersICS:Ta slovenski standard je istoveten z:EN 10217-2:2002SIST EN 10217-2:2003en01-april-2003SIST EN 10217-2:2003SLOVENSKI
STANDARD
EUROPEAN STANDARDNORME EUROPÉENNEEUROPÄISCHE NORMEN 10217-2May 2002ICS 23.040.10; 77.140.75English versionWelded steel tubes for pressure purposes - Technical deliveryconditions - Part 2: Electric welded non-alloy and alloy steeltubes with specified elevated temperature propertiesTubes soudés en acier pour service sous pression -Conditions techniques de livraison - Partie 2: Tubes soudésélectriquement en acier non allié et allié aveccaractéristiques spécifiées à température élevéeGeschweißte Stahlrohre für Druckbeanspruchungen -Technische Lieferbedingungen - Teil 2: Elektrischgeschweißte Rohre aus unlegierten und legierten Stählenmit festgelegten Eigenschaften bei erhöhten TemperaturenThis European Standard was approved by CEN on 25 April 2002.CEN members are bound to comply with the CEN/CENELEC Internal Regulations which stipulate the conditions for giving this EuropeanStandard the status of a national standard without any alteration. Up-to-date lists and bibliographical references concerning such nationalstandards may be obtained on application to the Management Centre or to any CEN member.This European Standard exists in three official versions (English, French, German). A version in any other language made by translationunder the responsibility of a CEN member into its own language and notified to the Management Centre has the same status as the officialversions.CEN members are the national standards bodies of Austria, Belgium, Czech Republic, Denmark, Finland, France, Germany, Greece,Iceland, Ireland, Italy, Luxembourg, Malta, Netherlands, Norway, Portugal, Spain, Sweden, Switzerland and United Kingdom.EUROPEAN COMMITTEE FOR STANDARDIZATIONCOMITÉ EUROPÉEN DE NORMALISATIONEUROPÄISCHES KOMITEE FÜR NORMUNGManagement Centre: rue de Stassart, 36
B-1050 Brussels© 2002 CENAll rights of exploitation in any form and by any means reservedworldwide for CEN national Members.Ref. No. EN 10217-2:2002 ESIST EN 10217-2:2003

Testing.2411.13Material identification.2411.14Retests, sorting and reprocessing.2412MARKING.2412.1Marking to be applied.2412.2Additional marking.2513PROTECTION.25Annex ZA (informative).26Bibliography.27SIST EN 10217-2:2003

European Standard series covering tubes for pressure purposes is:EN 10216:Seamless
steel tubes for pressure purposes.According to the CEN/CENELEC Internal Regulations, the national standards organizations of the followingcountries are bound to implement this European Standard: Austria, Belgium, Czech Republic, Denmark, Finland,France, Germany, Greece, Iceland, Ireland, Italy, Luxembourg, Malta, Netherlands, Norway, Portugal, Spain,Sweden, Switzerland and the United Kingdom.SIST EN 10217-2:2003

temperatureEN 10020, Definitions and classification of grades of steelEN 10021, General technical delivery requirements for steel and iron productsEN 10027-1, Designation systems for steels - Part 1 : Steel names, principle symbols.EN 10027-2, Designation systems for steels Part 2 : Numerical systems.EN 10045-1, Metallic materials - Charpy impact test - Part 1 : Test methodEN 10052, Vocabulary of heat treatment terms for ferrous productsEN 10204, Metallic products - Types of inspection documentsENV 10220, Seamless and welded steel tubes - Dimensions and masses per unit lengthEN 10233, Metallic materials - Tubes - Flattening testEN 10234, Metallic materials - Tubes - Drift expanding testEN 10236, Metallic materials - Tubes - Ring expanding testEN 10237, Metallic materials - Tubes - Ring tensile testEN 10246-1, Non-Destructive Testing
of steel tubes Part 1 : Automatic electromagnetic testing of seamless andwelded (except submerged arc welded) ferromagnetic steel tubes for verification of hydraulic leak-tightnessEN 10246-3, Non-Destructive Testing
of steel tubes - Part 3 :Automatic eddy current testing of seamless andwelded (except submerged arc-welded) steel tubes for the detection of imperfectionsEN 10246-5, Non-Destructive Testing
of steel tubes – Part 5: Automatic full peripheral magnetic transducer/fluxleakage testing of seamless and welded (except submerged arc-welded) ferromagnetic steel tubes for thedetection of lo
...