ASTM E2306-18
(Guide)Standard Guide for Disposal of Personal Property Assets
Standard Guide for Disposal of Personal Property Assets
SIGNIFICANCE AND USE
5.1 Continuing emphasis by interested stakeholders demands that an entity dispose of surplus personal property assets in the most economical and efficient manner possible.
5.2 The selection of the disposal method may depend on regulatory, environmental, or safety concerns.
5.3 A personal property assets disposal program should be conducted in a manner consistent with the entity’s requirements, goals, and objectives.
SCOPE
1.1 This guide describes various personal property asset disposal methods including donation, sales, recycling, destruction, and abandonment.
1.2 This guide recognizes that while some entities distinguish between ‘excess’ and ‘surplus’ personal property assets, this guide will remain consistent with Terminology E2135 using those words as they are defined therein.
1.3 Prior to disposing of any personal property assets, consideration should be given to reutilization/reuse within the owning entity.
1.4 Disposal is the final step in the final phase of the life cycle management of personal property assets.
1.5 As entities may incur unnecessary or additional costs associated with recordkeeping, taxes, storage, maintenance, etc,. of personal property assets until final disposal actions are complete, selecting the most efficient and economical method of disposal is critical to a successful disposal program.
1.6 This guide does not include specific requirements for the classification or the disposal of scrap items or materials.
1.7 This guide does not specifically address disposal requirements of governmental laws and regulations. However, this guide enables an entity to align or integrate applicable governmental laws and regulations with its own requirements.
1.7.1 When disposing of assets owned by another entity, entities must adhere to contractual requirements of the owning entity as well as applicable statutory and regulatory guidelines, policies, and requirements specific to the owning entity.
1.8 This standard does not purport to address all of the safety concerns, if any, associated with its use. It is the responsibility of the user of this standard to establish appropriate safety, health, and environmental practices and determine the applicability of regulatory limitations prior to use.
1.9 This international standard was developed in accordance with internationally recognized principles on standardization established in the Decision on Principles for the Development of International Standards, Guides and Recommendations issued by the World Trade Organization Technical Barriers to Trade (TBT) Committee.
General Information
Relations
Buy Standard
Standards Content (Sample)
This international standard was developed in accordance with internationally recognized principles on standardization established in the Decision on Principles for the
Development of International Standards, Guides and Recommendations issued by the World Trade Organization Technical Barriers to Trade (TBT) Committee.
Designation: E2306 − 18
Standard Guide for
1
Disposal of Personal Property Assets
This standard is issued under the fixed designation E2306; the number immediately following the designation indicates the year of
original adoption or, in the case of revision, the year of last revision. A number in parentheses indicates the year of last reapproval. A
superscript epsilon (´) indicates an editorial change since the last revision or reapproval.
1. Scope ization established in the Decision on Principles for the
Development of International Standards, Guides and Recom-
1.1 This guide describes various personal property asset
mendations issued by the World Trade Organization Technical
disposal methods including donation, sales, recycling,
Barriers to Trade (TBT) Committee.
destruction, and abandonment.
1.2 This guide recognizes that while some entities distin-
2. Referenced Documents
guish between ‘excess’ and ‘surplus’ personal property assets,
2
2.1 ASTM Standards:
this guide will remain consistent with Terminology E2135
using those words as they are defined therein. E2135 Terminology for Property and Asset Management
E2279 Practice for Establishing the Guiding Principles of
1.3 Prior to disposing of any personal property assets,
Property Asset Management
consideration should be given to reutilization/reuse within the
E2858 Practice for Sales of Personal Property
owning entity.
2.2 Other Documents:
1.4 Disposal is the final step in the final phase of the life
e-Stewards Standard for Responsible Recycling and Reuse
cycle management of personal property assets.
3
of Electronic Equipment
1.5 As entities may incur unnecessary or additional costs
International Organization for Standardization (ISO)
associated with recordkeeping, taxes, storage, maintenance,
4
14001 Environmental Management Standards
etc,. of personal property assets until final disposal actions are
National Institute of Standards and Technology (NIST)
complete, selecting the most efficient and economical method
Special Publication 800–88 Guidelines for Media Saniti-
of disposal is critical to a successful disposal program.
5
zation
1.6 Thisguidedoesnotincludespecificrequirementsforthe
Responsible Recycling (R2) Standard Responsible Recy-
classification or the disposal of scrap items or materials. 6
cling
1.7 This guide does not specifically address disposal re-
Restriction of Hazardous Substances (RoHS) Directive
7
quirements of governmental laws and regulations. However,
2002/95/EC
this guide enables an entity to align or integrate applicable
Waste Electrical and Electronic Equipment (WEEE) Direc-
governmental laws and regulations with its own requirements. 8
tive 2002/96/EC
1.7.1 When disposing of assets owned by another entity,
entities must adhere to contractual requirements of the owning
entity as well as applicable statutory and regulatory guidelines,
2
For referenced ASTM standards, visit the ASTM website, www.astm.org, or
policies, and requirements specific to the owning entity.
contact ASTM Customer Service at service@astm.org. For Annual Book of ASTM
1.8 This standard does not purport to address all of the
Standards volume information, refer to the standard’s Document Summary page on
the ASTM website.
safety concerns, if any, associated with its use. It is the
3
Available from e-Stewards, Basel Action Network, 206 First Avenue South,
responsibility of the user of this standard to establish appro-
Suite 410, Seattle, WA 98104, http://e-stewards.org.
priate safety, health, and environmental practices and deter- 4
Available from International Organization for Standardization (ISO), ISO
mine the applicability of regulatory limitations prior to use. Central Secretariat, BIBC II, Chemin de Blandonnet 8, CP 401, 1214 Vernier,
Geneva, Switzerland, http://www.iso.org.
1.9 This international standard was developed in accor-
5
Available from National Institute of Standards and Technology (NIST), 100
dance with internationally recognized principles on standard-
Bureau Dr., Stop 1070, Gaithersburg, MD 20899-1070, http://www.nist.gov.
6
Available from Sustainable Electronics Recycling International, P.O. Box
19611, Boulder, CO 80308, http://www.sustainableelectronics.org.
1 7
This guide is under the jurisdiction of ASTM Committee E53 on Asset Available from European Commission, Directorate-General for Environment,
Management and is the direct responsibility of Subcommittee E53.04 on Reutiliza- B-1049 Brussels, Belgium, http://ec.europa.eu/environment/waste/rohs_eee/index_
tion and Disposal. en.htm.
8
Current edition approved July 1, 2018. Published August 2018. Originally Available from European Commission, Directorate-General for Environment,
approv
...
This document is not an ASTM standard and is intended only to provide the user of an ASTM standard an indication of what changes have been made to the previous version. Because
it may not be technically possible to adequately depict all changes accurately, ASTM recommends that users consult prior editions as appropriate. In all cases only the current version
of the standard as published by ASTM is to be considered the official document.
Designation: E2306 − 13 E2306 − 18
Standard PracticeGuide for
1
Disposal of Personal Property Assets
This standard is issued under the fixed designation E2306; the number immediately following the designation indicates the year of
original adoption or, in the case of revision, the year of last revision. A number in parentheses indicates the year of last reapproval. A
superscript epsilon (´) indicates an editorial change since the last revision or reapproval.
1. Scope
1.1 This practice describes various personal property disposal methods including donation, sales, recycling, destruction, and
abandonment.
1.2 This practice recognizes that while some entities distinguish between ‘excess’ and ‘surplus’ personal property, this practice
will remain consistent with Terminology E2135 using those words as they are defined therein.
1.3 Prior to disposing of any personal property, consideration should be given to reutilization/reuse within the owning entity.
1.4 Disposal is the final step in the final phase of the management of personal property.
1.5 As entities may incur unnecessary or additional costs associated with recordkeeping, taxes, storage, maintenance, etc,. of
personal property until final disposal actions are complete, selecting the most efficient and economical method of disposal is critical
to a successful disposal program.
1.6 This practice does not include specific requirements for the classification or the disposal of scrap items or materials.
1.7 This practice does not specifically address disposal requirements of governmental laws and regulations. However, this
practice enables an entity to align or integrate applicable governmental laws and regulations with its own requirements.
1.7.1 When disposing of property owned by another entity, entities must adhere to contractual requirements of the owning entity
as well as applicable statutory and regulatory guidelines, policies, and requirements specific to the owning entity.
1.8 This standard does not purport to address all of the safety concerns, if any, associated with its use. It is the responsibility
of the user of this standard to establish appropriate safety and health practices and determine the applicability of regulatory
limitations prior to use.
2. Referenced Documents
2
2.1 ASTM Standards:
E2135 Terminology for Property and Asset Management
2.2 Other Documents:
3
e-Stewards Standard for Responsible Recycling and Reuse of Electronic Equipment
4
ISO 14001 Environmental Management Standards
5
NIST 800–88 Guidelines for Media Sanitization
6
R2 Standard Recycling Responsibly
RoHS Directive Directive 2002/96/EC on the Restriction of the Use of Certain Hazardous Substances in Electrical and
7
Electronic Equipment
1
This practiceguide is under the jurisdiction of ASTM Committee E53 on Asset Management and is the direct responsibility of Subcommittee E53.04 on Reutilization
and Disposal.
Current edition approved March 1, 2013July 1, 2018. Published April 2013August 2018. Originally approved in 2003. Last previous edition approved in 20112013 as
E2306 – 11.E2306–13. DOI: 10.1520/E2306-13.10.1520/E2306–18.
2
For referenced ASTM standards, visit the ASTM website, www.astm.org, or contact ASTM Customer Service at service@astm.org. For Annual Book of ASTM Standards
volume information, refer to the standard’sstandard’s Document Summary page on the ASTM website.
3
Available from e-Stewards, Basel Action Network, 206 First Avenue South, Suite 410, Seattle, WA 98104, http://e-stewards.org.
4
Available from International Organization for Standardization (ISO), 1, ch. de la Voie-Creuse, CP 56, CH-1211 Geneva 20,ISO Central Secretariat, BIBC II, Chemin de
Blandonnet 8, CP 401, 1214 Vernier, Geneva, Switzerland, http://www.iso.org.
5
Available from National Institute of Standards and Technology (NIST), 100 Bureau Dr., Stop 1070, Gaithersburg, MD 20899-1070, http://www.nist.gov.
6
Available from R2 Solutions, 2075 Yarmouth Ave., Boulder, CO 80301, http://www.r2solutions.org.Sustainable Electronics Recycling International, P.O. Box 19611,
Boulder, CO 80308, http://www.sustainableelectronics.org.
7
Available from Environment Directorate-General, European Commission, Directorate-General for Environment, B-1049 Brussels, http://www.rohs-guide.com.Belgium,
http://ec.europa.eu/environment/waste/rohs_eee/index_en.htm.
Copyright © ASTM International, 100 Barr Harbor Drive, PO Box C700, West Conshohocken, PA 19428-2959. United States
1
---------------------- Page: 1 ----------------------
E2306 − 18
8
WEEE Directive Directive 2002/96/EC on Waste
...
Questions, Comments and Discussion
Ask us and Technical Secretary will try to provide an answer. You can facilitate discussion about the standard in here.