iTeh Standards logo
EURUSD
Your shopping cart is empty.

91.060.99 - Other elements of buildings

ICS 91.060.99 Details

Other elements of buildings

Weitere Bauelemente

Autres elements de construction

Drugi stavbni elementi

General Information

Parent
91.060 - Elements of buildings

Frequently Asked Questions

ICS 91.060.99 is a classification code in the International Classification for Standards (ICS) system. It covers "Other elements of buildings". The ICS is a hierarchical classification system used to organize international, regional, and national standards, facilitating the search and identification of standards across different fields.

There are 39 standards classified under ICS 91.060.99 (Other elements of buildings). These standards are published by international and regional standardization bodies including ISO, IEC, CEN, CENELEC, and ETSI.

The International Classification for Standards (ICS) is a hierarchical classification system maintained by ISO to organize standards and related documents. It uses a three-level structure with field (2 digits), group (3 digits), and sub-group (2 digits) codes. The ICS helps users find standards by subject area and enables statistical analysis of standards development activities.

e-Library Subscription

Create subscription and get permanent access to documents within 91.060.99 - Other elements of buildings

Type
Monthly Subscription
for
seat
×
$ 123.03
$ 123.03

Currently subscription includes documents marked with .We are working on making all documents available within the subscription.

Standardization Organization
Technical Committee
Directive
Mandate
50
SIST
SIST EN 14135:2025(Main)
Covering - Determination of fire protection ability
EN 14135:2025

This document is applicable to all coverings, including but not limited to renderings, boards with and without air gaps and installed with various support systems. This document specifies a method for determining the ability of a covering to protect underlying materials against damage during a specified fire exposure.
The document is not used for the evaluation of fire resistance classifications (e.g. EI, EW, E) or reaction to fire classifications (specified in EN 13501-1).
The fire protection ability is influenced by the presence of combustible materials in the cavity behind the covering. The applicability of the results is limited according to the quantity and position of such combustible materials within that cavity.
NOTE   The amount of combustible materials permissible in the cavity is generally laid down in national regulations.

  • Standard
    32 pages
    English language
    e-Library read for
    1 day
SIST
SIST EN 1364-6:2025(Main)
Fire resistance tests for non-loadbearing elements - Part 6: Open-state cavity barriers
EN 1364-6:2025

This test method specifies methods for determining the fire resistance of open-state cavity barriers and is to be used in conjunction with EN 1363-1.
This document is applicable to non-loadbearing vertically or horizontally oriented open-state cavity barriers, which are designed to close and provide fire separation in the event of fire.
Open-state cavity barriers in facades, where the fire exposure comes as a result of a breaking window and allowing a developed fire to come into contact with the façade, can be tested to the optional "flame" criteria.
This document is not applicable to cavity barriers containing penetration seals, which are covered by EN 1366-3.
This document is not applicable to closed cavity barriers, which are covered by EN 1366-4.

  • Standard
    18 pages
    English language
    e-Library read for
    1 day
CEN
EN 1364-6:2025(Main)
Fire resistance tests for non-loadbearing elements - Part 6: Open-state cavity barriers
SIST EN 1364-6:2025

This test method specifies methods for determining the fire resistance of open-state cavity barriers and is to be used in conjunction with EN 1363-1.
This document is applicable to non-loadbearing vertically or horizontally oriented open-state cavity barriers, which are designed to close and provide fire separation in the event of fire.
Open-state cavity barriers in facades, where the fire exposure comes as a result of a breaking window and allowing a developed fire to come into contact with the façade, can be tested to the optional "flame" criteria.
This document is not applicable to cavity barriers containing penetration seals, which are covered by EN 1366-3.
This document is not applicable to closed cavity barriers, which are covered by EN 1366-4.

  • Standard
    18 pages
    English language
    e-Library read for
    1 day
ASTM
ASTM D6451/D6451M-99(2021)(Guide)
Standard Guide for Application of Asphalt-Based Protection Board

SIGNIFICANCE AND USE
4.1 This guide outlines general procedures for the storage and application of semi-rigid protection board to below-grade and below wearing surface waterproofing. The proper application is necessary to prevent damage to the waterproofing membrane during backfilling, paving, or other construction operations, as well as to minimize the effects of soil stresses.  
4.2 This guide is intended to supplement instructions from designers and manufacturers.
SCOPE
1.1 This guide lists minimum application and installation requirements for semi-rigid protection board when used as protection for below-grade or below wearing surface (like plaza decks) waterproofing.  
1.2 The values stated in either SI units or inch-pound units are to be regarded separately as standard. The values stated in each system may not be exact equivalents; therefore, each system shall be used independently of the other. Combining values from the two systems may result in nonconformance with the standard.  
1.3 This standard does not purport to address all of the safety concerns, if any, associated with its use. It is the responsibility of the user of this standard to establish appropriate safety, health, and environmental practices and determine the applicability of regulatory limitations prior to use. For specific precautionary statements, see Section 8.  
1.4 This international standard was developed in accordance with internationally recognized principles on standardization established in the Decision on Principles for the Development of International Standards, Guides and Recommendations issued by the World Trade Organization Technical Barriers to Trade (TBT) Committee.

  • Guide
    2 pages
    English language
    sale 15% off
ASTM
ASTM E1190-21(Test Method)
Standard Test Methods for Strength of Power-Actuated Fasteners Installed in Structural Members

SIGNIFICANCE AND USE
4.1 These test methods are intended to measure the anchoring capability and shear resistance of power-actuated fasteners to provide information from which applicable design values are to be derived for use in structural applications, such as in members of concrete, concrete masonry, and steel.
SCOPE
1.1 These test methods describe procedures for determining the static axial tensile and shear strengths of power-actuated fasteners installed in structural members made of concrete, concrete masonry, and steel.  
1.2 These test methods are intended for use with fasteners that are installed perpendicular to a plane surface of the structural member.  
1.3 Tests for combined tension and shear, fatigue, dynamic, and torsional load resistance are not covered.  
1.4 The values stated in SI units are to be regarded as standard. The values given in parentheses after SI units are provided for information only and are not considered standard.  
1.5 This standard does not purport to address all of the safety concerns, if any, associated with its use. It is the responsibility of the user of this standard to establish appropriate safety, health, and environmental practices and determine the applicability of regulatory limitations prior to use. Specific hazard statements are given in Section 6.  
1.6 This international standard was developed in accordance with internationally recognized principles on standardization established in the Decision on Principles for the Development of International Standards, Guides and Recommendations issued by the World Trade Organization Technical Barriers to Trade (TBT) Committee.

  • Standard
    6 pages
    English language
    sale 15% off
  • Standard
    6 pages
    English language
    sale 15% off
ASTM
ASTM D6506/D6506M-01(2018)e1(Specification)
Standard Specification for Asphalt Based Protection Board for Below-Grade Waterproofing

ABSTRACT
This specification covers the manufacture, testing, and physical requirements of two classes of asphalt based protection board used for protecting the integrity of below grade or below wearing surface waterproofing. Class A is made with asphalt saturated organic felt on the bottom and a coated or saturated non-woven glass felt on top, while Class B is made with glass fabrics both top and bottom. The boards shall be sampled for testing, and each class shall conform accordingly to specified individual values of the following physical properties: nominal thickness; puncture strength; water absorption; asphalt content; and resistance to decay.
SCOPE
1.1 This specification covers an asphalt based protection board used for protecting the integrity of below grade or below wearing surface waterproofing. The protection board protects the waterproofing system from backfill, surfacing, construction activities, and weathering conditions prior to backfilling or applying surfacing.  
1.2 The values stated in either SI units or inch-pound units are to be regarded separately as standard. The values stated in each system may not be exact equivalents; therefore, each system shall be used independently of the other. Combining values from the two systems may result in non-conformance with the standard.  
1.3 This standard does not purport to address all of the safety concerns, if any, associated with its use. It is the responsibility of the user of this standard to establish appropriate safety, health, and environmental practices and determine the applicability of regulatory limitations prior to use.  
1.4 This international standard was developed in accordance with internationally recognized principles on standardization established in the Decision on Principles for the Development of International Standards, Guides and Recommendations issued by the World Trade Organization Technical Barriers to Trade (TBT) Committee.

  • Technical specification
    2 pages
    English language
    sale 15% off
CEN
EN 1364-5:2017(Main)
Fire resistance tests for non-loadbearing elements - Part 5: Air transfer grilles
SIST EN 1364-5:2017

This European Standard specifies a method for determining the fire resistance of air transfer grilles (ATG).
It is applicable to air transfer grilles intended for installation in building components (typically walls, floors or ceilings). The orientation of the installation of the air transfer grille can be vertical or horizontal.
The closing mechanism of the air transfer grille can come from expansion of material and/or from any mechanical or electrical closing device.
This test method is valid for fire resistant or fire resistant and smoke control air transfer grilles.
An additional test configuration is valid for fire resistant or fire resistant and smoke control air transfer grilles in applications where flame impingement is a risk during open state from start of fire (Annex A).
This test method evaluates the behaviour of the air transfer grille when exposed to the standard fire curve described in EN 1363-1 and the standard pressure described in EN 1363-1. It is not the intention of this test to provide quantitative information on the rate of leakage of smoke and/or hot gases or on the transmission or generation of fumes under fire conditions. Such phenomena are only to be noted in describing the general behaviour of test specimens during the test.
The rate of leakage of smoke at ambient temperature or at 200 °C as an optional requirement for ATG with declared smoke control will be confirmed in accordance with standard EN 1634-3.
This test method is not valid for determining the fire resistance of air transfer grilles that are used in ducts because ATG are considered as separating elements. The test method for ATG, used in ducts is described in the corresponding duct standards.
This test method is not valid for determining the fire resistance of a fire damper or a fire barrier connected to a duct on either or both sides because an ATG is tested as a fire-separating element on its own. Fire dampers are tested according to EN 1366-2. Non-mechanical fire barriers are tested according to EN 1366-12.
This test method is not valid for determining the fire resistance of air transfer grilles in fire doors, shutters and openable windows as specified in EN 1634-1 and EN 1364-2, because the deformation of fire doors, shutters and openable windows in fire conditions differs from the deformation of flexible/rigid walls. Moreover the location of thermocouples in the door standard is too specific to be handled in this standard.
All values given in this standard are nominal unless otherwise specified.

  • Standard
    26 pages
    English language
    e-Library read for
    1 day
SIST
SIST EN 1364-5:2017(Main)
Fire resistance tests for non-loadbearing elements - Part 5: Air transfer grilles
EN 1364-5:2017

This European Standard specifies a method for determining the fire resistance of air transfer grilles (ATG).
It is applicable to air transfer grilles intended for installation in building components (typically walls, floors or ceilings). The orientation of the installation of the air transfer grille can be vertical or horizontal.
The closing mechanism of the air transfer grille can come from expansion of material and/or from any mechanical or electrical closing device.
This test method is valid for fire resistant or fire resistant and smoke control air transfer grilles.
An additional test configuration is valid for fire resistant or fire resistant and smoke control air transfer grilles in applications where flame impingement is a risk during open state from start of fire (Annex A).
This test method evaluates the behaviour of the air transfer grille when exposed to the standard fire curve described in EN 1363-1 and the standard pressure described in EN 1363-1. It is not the intention of this test to provide quantitative information on the rate of leakage of smoke and/or hot gases or on the transmission or generation of fumes under fire conditions. Such phenomena are only to be noted in describing the general behaviour of test specimens during the test.
The rate of leakage of smoke at ambient temperature or at 200 °C as an optional requirement for ATG with declared smoke control will be confirmed in accordance with standard EN 1634-3.
This test method is not valid for determining the fire resistance of air transfer grilles that are used in ducts because ATG are considered as separating elements. The test method for ATG, used in ducts is described in the corresponding duct standards.
This test method is not valid for determining the fire resistance of a fire damper or a fire barrier connected to a duct on either or both sides because an ATG is tested as a fire-separating element on its own. Fire dampers are tested according to EN 1366-2. Non-mechanical fire barriers are tested according to EN 1366-12.
This test method is not valid for determining the fire resistance of air transfer grilles in fire doors, shutters and openable windows as specified in EN 1634-1 and EN 1364-2, because the deformation of fire doors, shutters and openable windows in fire conditions differs from the deformation of flexible/rigid walls. Moreover the location of thermocouples in the door standard is too specific to be handled in this standard.
All values given in this standard are nominal unless otherwise specified.

  • Standard
    26 pages
    English language
    e-Library read for
    1 day
ASTM
ASTM F2697-15(Test Method)
Standard Test Methods for Physical Assault on Overhead Horizontal Fixed Barriers for Detention and Correctional Facilities

SIGNIFICANCE AND USE
4.1 A major concern for administrative officials is the security of barriers used in detention/correctional facilities. These test methods are designed to aid in identifying levels of physical security for horizontal fixed barriers, which serve to enclose or separate secure areas. This does not apply to the passage of contraband or vandalism.  
4.2 These test methods are not intended to provide a measure of resistance for a ceiling subjected to attack by corrosive agents, by high-powered rifles, explosives, sawing, or other such methods not typically available to inmates. These test methods are intended to evaluate the resistance of a ceiling to violent attacks by sustained manpower using battering devices, such as benches, barbells, bunks, or tables; and by an upward static force such that could be applied by an inmate pushing against the ceiling with his hands, feet, or back (that is, squat position on a top bunk in a cell). Attacks from outside the facility and fire resistance ratings are not addressed in this standard.  
4.3 The primary purpose or result of these test methods is to approximate the levels of abuse to which horizontal fixed barriers could possibly be subjected in the field. The desired result of its use is to help provide assurance of protection to the public, to facility personnel, and to the inmates themselves.  
4.4 It is recommended that detention/correctional facility administration provide adequate training, supervision, and preventive maintenance programs to enable horizontal fixed barriers to function as intended throughout the expected service life.
SCOPE
1.1 These test methods cover requirements for simulated service tests and testing equipment for determining the performance characteristics of horizontal fixed barriers designed to incarcerate inmates in detention and correctional institutions. The testing equipment provides for the setup and testing of sample barriers and installation systems.  
1.2 It is the intent of these test methods to help ensure that detention security horizontal fixed barriers perform at or above minimum acceptable levels for control of passage to unauthorized or secure areas, to confine inmates, and to delay and frustrate escape attempts. Provide security grilles, access doors, light fixtures, and similar assemblies compatible with these levels of performance, with test apparatus adjustments as required to suit the particular product.  
1.3 These test methods apply to horizontal fixed barriers enclosing or separating secure areas of detention/correctional facilities.  
1.4 The values stated in inch-pound units are to be regarded as standard. The values given in parentheses are mathematical conversion to SI units that are provided for information only and are not considered standard.  
1.5 This standard does not purport to address all of the safety concerns, if any, associated with its use. It is the responsibility of the user of this standard to establish appropriate safety and health practices and determine the applicability of regulatory limitations prior to use.

  • Standard
    11 pages
    English language
    sale 15% off
CEN
EN 15080-8:2009(Main)
Extended application of results from fire resistance tests - Part 8: Beams
SIST EN 15080-8:2009

This Part of EN 15080 identifies the parameters and factors that affect the fire resistance of beams and need to be taken into account when considering extended application of results of beams tested in accordance with EN 1365-3. It also gives the methodology to be used when preparing an extended application, including rules and calculation methods which can be applied to establish the resultant influence of a variation in one or more parameters and to determine the field of extended application.

  • Standard
    44 pages
    English language
    e-Library read for
    1 day
SIST
SIST EN 15080-8:2009(Main)
Extended application of results from fire resistance tests - Part 8: Beams
EN 15080-8:2009

This Part of EN 15080 identifies the parameters and factors that affect the fire resistance of beams and need to be taken into account when considering extended application of results of beams tested in accordance with EN 1365-3. It also gives the methodology to be used when preparing an extended application, including rules and calculation methods which can be applied to establish the resultant influence of a variation in one or more parameters and to determine the field of extended application.

  • Standard
    44 pages
    English language
    e-Library read for
    1 day
SIST
SIST EN 1365-5:2005(Main)
Fire resistance tests for loadbearing elements - Part 5: Balconies and walkways
EN 1365-5:2004

This Part of EN 1365 specifies a method for determining the fire resistance, in respect with loadbearing capacity and with no separating function, of:
- balconies exposed to the fire from either outside or inside the building; and
- walkways exposed to the fire from either outside or inside the building.
This standard is used in conjunction with EN 1363-1.

  • Standard
    11 pages
    English language
    e-Library read for
    1 day
SIST
SIST EN 1365-3:2001(Main)
Fire resistance tests for loadbearing elements - Part 3: Beams
EN 1365-3:1999

This part of EN 1365 specifies a method for determining the fire resistance of beams with or without applied fire protection systems and with or without cavities.  This standard is used in conjunction with prEN 1363-1. Beams which are part of a floor construction are tested with the floor construction as described in prEN 1365-2 and are subject to evaluation of integrity and insulation. General guidance on this method of test is given in annex A.

  • Standard
    14 pages
    English language
    e-Library read for
    1 day
SIST
SIST EN 1365-4:1999(Main)
Fire resistance tests for loadbearing elements - Part 4: Columns
EN 1365-4:1999

This part of EN 1365 specifies a method for determining the fire resistance of columns when fully exposed to fire on all sides. This standard is used in conjunction with prEN 1363-1. General guidance on this method of test is given in annex A.

  • Standard
    11 pages
    English language
    e-Library read for
    1 day
SIST
SIST ISO 7727:1996(Main)
Joints in building -- Principles for jointing of building components -- Accommodation of dimensional deviations during construction
ISO 7727:1984

Is one of a series dealing with general rules and principles for the jointing of building components. Establishes a classification system for joints in building based on the ability of joints to accommodate dimensional deviations during construction. Examples of types of joints are given in an annex.

  • Standard
    5 pages
    English language
    sale 15% off
  • Standard
    5 pages
    French language
    sale 15% off
  • Standard
    5 pages
    French language
    sale 15% off
  • Standard + National Annex and/or Foreword
    9 pages
    Foreword and/or annex in Slovenian language, body of the standard in English language
    e-Library read for
    1 day
SIST
SIST ISO 3447:1996(Main)
Joints in building -- General check-list of joint functions
ISO 3447:1975

Forms one of a series concerning joints in building. The series includes the following International Standards: ISO 2444 - Joints in building - Vocabulary; ISO 2445 - Joints in building - Fundamental principles for design. Gives a general check-list of functions of joints in building for use in their design.

  • Standard
    2 pages
    English language
    sale 15% off
  • Standard
    3 pages
    French language
    sale 15% off
  • Standard
    3 pages
    French language
    sale 15% off
  • Standard + National Annex and/or Foreword
    6 pages
    Foreword and/or annex in Slovenian language, body of the standard in English language
    e-Library read for
    1 day
SIST
SIST ISO 2445:1996(Main)
Joints in building -- Fundamental principles for design
ISO 2445:1972

Outlines some basic principles for the design of joints in building. These principles fall under three main headings of properties: geometrical, structural and environmental properties of joints.

  • Standard
    1 page
    English language
    sale 15% off
  • Standard
    1 page
    French language
    sale 15% off
  • Standard
    1 page
    French language
    sale 15% off
  • Standard + National Annex and/or Foreword
    6 pages
    Foreword and/or annex in Slovenian language, body of the standard in English language
    e-Library read for
    1 day
SIST
SIST ISO 6589:1996(Main)
Joints in building -- Laboratory method of test for air permeability of joints
ISO 6589:1983

Specifies the test method to be used in laboratories for assessing the air permeability of non-opening joints between components in the exterior walls of buildings, whether the joints have been subjected to prior ageing or not. Does not apply to joints within components (for example the joint between glass fixed in a window frame and sealed with a glazing compound).

  • Standard
    3 pages
    English language
    sale 15% off
  • Standard
    3 pages
    French language
    sale 15% off
  • Standard
    3 pages
    French language
    sale 15% off
ISO
ISO 6589:1983(Main)
Joints in building - Laboratory method of test for air permeability of joints
SIST ISO 6589:1996

Specifies the test method to be used in laboratories for assessing the air permeability of non-opening joints between components in the exterior walls of buildings, whether the joints have been subjected to prior ageing or not. Does not apply to joints within components (for example the joint between glass fixed in a window frame and sealed with a glazing compound).

  • Standard
    3 pages
    English language
    sale 15% off
  • Standard
    3 pages
    French language
    sale 15% off
  • Standard
    3 pages
    French language
    sale 15% off
ISO
ISO 3447:1975(Main)
Joints in building - General check-list of joint functions
SIST ISO 3447:1996

Forms one of a series concerning joints in building. The series includes the following International Standards: ISO 2444 - Joints in building - Vocabulary; ISO 2445 - Joints in building - Fundamental principles for design. Gives a general check-list of functions of joints in building for use in their design.

  • Standard
    2 pages
    English language
    sale 15% off
  • Standard
    3 pages
    French language
    sale 15% off
  • Standard
    3 pages
    French language
    sale 15% off
  • Standard + National Annex and/or Foreword
    6 pages
    Foreword and/or annex in Slovenian language, body of the standard in English language
    e-Library read for
    1 day
ISO
ISO 2445:1972(Main)
Joints in building - Fundamental principles for design
SIST ISO 2445:1996

Outlines some basic principles for the design of joints in building. These principles fall under three main headings of properties: geometrical, structural and environmental properties of joints.

  • Standard
    1 page
    English language
    sale 15% off
  • Standard
    1 page
    French language
    sale 15% off
  • Standard
    1 page
    French language
    sale 15% off
  • Standard + National Annex and/or Foreword
    6 pages
    Foreword and/or annex in Slovenian language, body of the standard in English language
    e-Library read for
    1 day
CEN
prEN 1364-5(Main)
Fire resistance tests for non-loadbearing elements - Part 5: Air transfer grilles
oSIST prEN 1364-5:2025

This document specifies a method for determining the fire resistance of air transfer grilles (ATG).
It is applicable to air transfer grilles intended for installation in building components (typically walls, floors or ceilings). The orientation of the installation of the air transfer grille can be vertical or horizontal.
The closing mechanism of the air transfer grille can come from expansion of material and/or from any mechanical or electrical closing device.
This test method is valid for fire resistant or fire resistant and smoke control air transfer grilles.
An additional test configuration is valid for fire resistant or fire resistant and smoke control air transfer grilles in applications where flame impingement is a risk during open state from start of fire (Annex A).
This test method evaluates the behaviour of the air transfer grille when exposed to the standard fire curve described in EN 1363 1 and the standard pressure described in EN 1363 1. It is not the intention of this test to provide quantitative information on the rate of leakage of smoke and/or hot gases or on the transmission or generation of fumes under fire conditions. Such phenomena are only noted in describing the general behaviour of test specimens during the test.
The rate of leakage of smoke at ambient temperature or at 200 °C as an optional requirement for ATG with declared smoke control will be confirmed in accordance with EN 1634 3.
This test method is not valid for determining the fire resistance of air transfer grilles that are used in ducts because ATG are considered as separating elements. The test method for ATG, used in ducts is described in the corresponding duct standards.
This test method is not valid for determining the fire resistance of a fire damper or a fire barrier connected to a duct on either or both sides because an ATG is tested as a fire-separating element on its own. Fire dampers are tested according to EN 1366 2. Non-mechanical fire barriers are tested according to EN 1366 12.
This test method is not valid for determining the fire resistance of air transfer grilles in fire doors, shutters and openable windows as specified in EN 1634 1 and EN 1364 2, because the deformation of fire doors, shutters and openable windows in fire conditions differs from the deformation of flexible/rigid walls. Moreover, the location of thermocouples in the door standard is too specific to be handled in this document.
All values given in this document are nominal unless otherwise specified.

  • Draft
    27 pages
    English language
    e-Library read for
    1 day
SIST
oSIST prEN 1364-5:2025(Main)
Fire resistance tests for non-loadbearing elements - Part 5: Air transfer grilles
prEN 1364-5

This document specifies a method for determining the fire resistance of air transfer grilles (ATG).
It is applicable to air transfer grilles intended for installation in building components (typically walls, floors or ceilings). The orientation of the installation of the air transfer grille can be vertical or horizontal.
The closing mechanism of the air transfer grille can come from expansion of material and/or from any mechanical or electrical closing device.
This test method is valid for fire resistant or fire resistant and smoke control air transfer grilles.
An additional test configuration is valid for fire resistant or fire resistant and smoke control air transfer grilles in applications where flame impingement is a risk during open state from start of fire (Annex A).
This test method evaluates the behaviour of the air transfer grille when exposed to the standard fire curve described in EN 1363 1 and the standard pressure described in EN 1363 1. It is not the intention of this test to provide quantitative information on the rate of leakage of smoke and/or hot gases or on the transmission or generation of fumes under fire conditions. Such phenomena are only noted in describing the general behaviour of test specimens during the test.
The rate of leakage of smoke at ambient temperature or at 200 °C as an optional requirement for ATG with declared smoke control will be confirmed in accordance with EN 1634 3.
This test method is not valid for determining the fire resistance of air transfer grilles that are used in ducts because ATG are considered as separating elements. The test method for ATG, used in ducts is described in the corresponding duct standards.
This test method is not valid for determining the fire resistance of a fire damper or a fire barrier connected to a duct on either or both sides because an ATG is tested as a fire-separating element on its own. Fire dampers are tested according to EN 1366 2. Non-mechanical fire barriers are tested according to EN 1366 12.
This test method is not valid for determining the fire resistance of air transfer grilles in fire doors, shutters and openable windows as specified in EN 1634 1 and EN 1364 2, because the deformation of fire doors, shutters and openable windows in fire conditions differs from the deformation of flexible/rigid walls. Moreover, the location of thermocouples in the door standard is too specific to be handled in this document.
All values given in this document are nominal unless otherwise specified.

  • Draft
    27 pages
    English language
    e-Library read for
    1 day
CEN
prEN 1364-6(Main)
Fire resistance tests for non-loadbearing elements - Part 6: Cavity Barriers
oSIST prEN 1364-6:2016

This test method specifies a method for determining the fire resistance of cavity barriers and is to be used in conjunction with EN 1363 1.
This standard is applicable to non-loadbearing vertically or horizontally oriented closed and open cavity barriers, which are used to provide fire separation to uncompartmented or ventilated spaces. Cavity barriers are designed to provide fire separating performance and the test method is therefore based on the standard room fire exposure in EN 1363 1. Open cavity barrier specimens are installed for test in one of two ways to simulate slow or sudden exposure in use.
This standard is not applicable to cavity barriers containing penetration seals, which are to be tested in accordance with EN 1366 3.

  • Draft
    30 pages
    English language
    e-Library read for
    1 day
SIST
oSIST prEN 1364-6:2016(Main)
Fire resistance tests for non-loadbearing elements - Part 6: Cavity Barriers
prEN 1364-6

This test method specifies a method for determining the fire resistance of cavity barriers and is to be used in conjunction with EN 1363 1.
This standard is applicable to non-loadbearing vertically or horizontally oriented closed and open cavity barriers, which are used to provide fire separation to uncompartmented or ventilated spaces. Cavity barriers are designed to provide fire separating performance and the test method is therefore based on the standard room fire exposure in EN 1363 1. Open cavity barrier specimens are installed for test in one of two ways to simulate slow or sudden exposure in use.
This standard is not applicable to cavity barriers containing penetration seals, which are to be tested in accordance with EN 1366 3.

  • Draft
    30 pages
    English language
    e-Library read for
    1 day
SIST
SIST EN 14135:2004(Main)
Coverings - Determination of fire protection ability
EN 14135:2004

This document specifies a method for determining the ability of a covering to protect underlying products against damage during a specified fire exposure.

  • Standard
    9 pages
    English language
    e-Library read for
    1 day
SIST
SIST ISO 2444:1997(Main)
Joints in building -- Vocabulary
ISO 2444:1988

Defines terms used to describe building joints, their constituent parts and their design in building construction. Cancels and replaces the first edition (ISO 2444-1974), of which it constitutes a minor revision.

  • Standard
    3 pages
    English language
    sale 15% off
  • Standard
    3 pages
    French language
    sale 15% off
  • Standard
    3 pages
    French language
    sale 15% off
  • Standard – translation
    10 pages
    Slovenian language
    e-Library read for
    1 day
ISO
ISO 2444:1988(Main)
Joints in building - Vocabulary
SIST ISO 2444:1997

Defines terms used to describe building joints, their constituent parts and their design in building construction. Cancels and replaces the first edition (ISO 2444-1974), of which it constitutes a minor revision.

  • Standard
    3 pages
    English language
    sale 15% off
  • Standard
    3 pages
    French language
    sale 15% off
  • Standard
    3 pages
    French language
    sale 15% off
  • Standard – translation
    10 pages
    Slovenian language
    e-Library read for
    1 day
ISO
ISO 2444:1974(Main)
Joints in building - Vocabulary
  • Standard
    2 pages
    English language
    sale 15% off
  • Standard
    2 pages
    French language
    sale 15% off
50