SIST EN 1365-5:2005

SLOVENSKI STANDARD
SIST EN 1365-5:2005
01-maj-2005
Preskusi požarne odpornosti nosilnih elementov – 5. del: Balkoni in hodniki vzdolž
fasade
Fire resistance tests for loadbearing elements - Part 5: Balconies and walkways
Feuerwiderstandsprüfungen für tragende Bauteile - Teil 5: Balkone und Laubengänge
Essais de résistance au feu des éléments porteurs - Partie 5: Balcons et passerelles
Ta slovenski standard je istoveten z: EN 1365-5:2004
ICS:
13.220.50 Požarna odpornost Fire-resistance of building
gradbenih materialov in materials and elements
elementov
91.060.99 Drugi stavbni elementi Other elements of buildings
SIST EN 1365-5:2005 en
2003-01.Slovenski inštitut za standardizacijo. Razmnoževanje celote ali delov tega standarda ni dovoljeno.

---------------------- Page: 1 ----------------------

SIST EN 1365-5:2005

---------------------- Page: 2 ----------------------

SIST EN 1365-5:2005
EUROPEAN STANDARD
EN 1365-5
NORME EUROPÉENNE
EUROPÄISCHE NORM
November 2004
ICS 13.220.50
English version
Fire resistance tests for loadbearing elements - Part 5:
Balconies and walkways
Essais de résistance au feu des éléments porteurs - Partie Feuerwiderstandsprüfungen für tragende Bauteile - Teil 5:
5: Balcons et passerelles Balkone und Laubengänge
This European Standard was approved by CEN on 9 July 2004.
CEN members are bound to comply with the CEN/CENELEC Internal Regulations which stipulate the conditions for giving this European
Standard the status of a national standard without any alteration. Up-to-date lists and bibliographical references concerning such national
standards may be obtained on application to the Central Secretariat or to any CEN member.
This European Standard exists in three official versions (English, French, German). A version in any other language made by translation
under the responsibility of a CEN member into its own language and notified to the Central Secretariat has the same status as the official
versions.
CEN members are the national standards bodies of Austria, Belgium, Cyprus, Czech Republic, Denmark, Estonia, Finland, France,
Germany, Greece, Hungary, Iceland, Ireland, Italy, Latvia, Lithuania, Luxembourg, Malta, Netherlands, Norway, Poland, Portugal, Slovakia,
Slovenia, Spain, Sweden, Switzerland and United Kingdom.
EUROPEAN COMMITTEE FOR STANDARDIZATION
COMITÉ EUROPÉEN DE NORMALISATION
EUROPÄISCHES KOMITEE FÜR NORMUNG
Management Centre: rue de Stassart, 36  B-1050 Brussels
© 2004 CEN All rights of exploitation in any form and by any means reserved Ref. No. EN 1365-5:2004: E
worldwide for CEN national Members.

---------------------- Page: 3 ----------------------

SIST EN 1365-5:2005
EN 1365-5:2004 (E)
Contents
page
Foreword.3
Introduction .4
1 Scope.5
2 Normative references.5
3 Terms and definitions .5
4 Test equipment.7
5 Test conditions.7
5.1 Furnace.7
5.2 Loading conditions.7
6 Test specimen.7
6.1 General.7
6.2 Size.7
6.3 Number.9
6.4 Design.9
6.4.1 General.9
6.4.2 Floor.9
6.5 Exposure.9
6.6 Construction.9
6.7 Verification.9
7 Installation of test specimen .10
7.1 General.10
7.2 Loading and restraint .10
8 Conditioning.10
9 Application of instrumentation.10
9.1 Furnace thermocouples (plate thermometers) .10
9.2 Pressure.10
9.3 Deflection.10
10 Test procedure.10
11 Performance criteria.11
12 Test report.11
13 Field of direct application of test results .11

2

---------------------- Page: 4 ----------------------

SIST EN 1365-5:2005
EN 1365-5:2004 (E)
Foreword
This document (EN 1365-5:2004) has been prepared by Technical Committee CEN/TC 127 “Fire safety in
buildings”, the secretariat of which is held by BSI.
This European Standard shall be given the status of a national standard, either by publication of an identical
text or by endorsement, at the latest by May 2005, and conflicting national standards shall be withdrawn at the
latest by May 2005.
This document has been prepared under a mandate given to CEN by the European Commission and the
European Free Trade Association, and supports essential requirements of the Construction Products Directive.
EN 1365 ‘Fire resistance tests for loadbearing elements’ consists of the following parts:
Part 1: Walls,
Part 2: Floors and roofs,
Part 3: Beams,
Part 4: Columns,
Part 5: Balconies and walkways,
Part 6: Stairs.
According to the CEN/CENELEC Internal Regulations, the national standards organizations of the following
countries are bound to implement this European Standard: Austria, Belgium, Cyprus, Czech Republic,
Denmark, Estonia, Finland, France, Germany, Greece, Hungary, Iceland, Ireland, Italy, Latvia, Lithuania,
Luxembourg, Malta, Netherlands, Norway, Poland, Portugal, Slovakia, Slovenia, Spain, Sweden, Switzerland
and United Kingdom.
3

---------------------- Page: 5 ----------------------

SIST EN 1365-5:2005
EN 1365-5:2004 (E)
Introduction
The purpose of this test is to measure the ability of a representative specimen of a balcony or walkway or a
part of those to maintain its loadbearing capacity when exposed to fire according to EN 1363-1.
Caution
The attention of all persons concerned with managing and carrying out this fire resistance test is drawn to the
fact that fire testing can be hazardous and that there is a possibility that toxic and/or harmful smoke and gases
can be evolved during the test. Mechanical and operational hazards can also arise during the construction of
the test elements or structures, their testing and disposal of test residues.
An assessment of all potential hazards and risks to health should be made and safety precautions should be
identified and provided. Written safety instructions should be issued. Appropriate training should be given to
relevant personnel. Laboratory personnel should ensure that they follow written safety instructions at all times.
4

---------------------- Page: 6 ----------------------

SIST EN 1365-5:2005
EN 1365-5:2004 (E)
1 Scope
This Part of EN 1365 specifies a method for determining the fire resistance, in respect with loadbearing
capacity and with no separating fun
...