iTeh StandardsiTeh Standards
EURUSD
Your shopping cart is empty.
SIST

SIST EN 1365-4:1999

(Main)

Fire resistance tests for loadbearing elements - Part 4: Columns

Fire resistance tests for loadbearing elements - Part 4: Columns

This part of EN 1365 specifies a method for determining the fire resistance of columns when fully exposed to fire on all sides. This standard is used in conjunction with prEN 1363-1. General guidance on this method of test is given in annex A.

Feuerwiderstandsprüfungen für tragende Bauteile - Teil 4: Stützen

Dieser Teil von EN 1365 legt ein Verfahren für die Bestimmung der Feuerwiderstandsdauer von Stützen fest, die einem direkten allseitigen Brand ausgesetzt sind. Diese Norm gilt in Verbindung mit EN 1363-1. Eine allgemeine Anleitung zu diesem Prüfverfahren ist in Anhang A angegeben.

Essais de résistance au feu des éléments porteurs - Partie 4: Poteaux

La présente partie de l'EN 1365 prescrit une méthode de détermination de la résistance au feu des poteaux lorsqu'ils sont entierement exposés au feu sur tous les côtés. La présente norme doit etre lue conjointement avec le prEN 1363-1. Des lignes directives générales sur cette méthode sont données dans l'annexe A.

Preskusi požarne odpornosti nosilnih elementov – 4. del: Stebri

General Information

Status
Published
Publication Date
30-Nov-1999
ICS
13.220.50 - Fire-resistance of building materials and elements
91.060.99 - Other elements of buildings
Technical Committee
POZ - Požarna varnost
Current Stage
6060 - National Implementation/Publication (Adopted Project)
Start Date
01-Dec-1999
Due Date
01-Dec-1999
Completion Date
01-Dec-1999
Directive
89/106/EEC - Construction products
Mandate
M/100 - Mandate to CEN/CENELEC concerning the execution of standardization work for harmonized standards on precast concrete products
Ref Project
EN 1365-4:1999 - Fire resistance tests for loadbearing elements - Part 4: Columns

Buy Standard

EN 1365-4:1999EN 1365-4:1999
PreviousNext
Standard
EN 1365-4:1999
English language
11 pages
sale 10% off
Preview
sale 10% off
Preview
e-Library read for
1 day

Standards Content (Sample)

2003-01.Slovenski inštitut za standardizacijo. Razmnoževanje celote ali delov tega standarda ni dovoljeno.Preskusi požarne odpornosti nosilnih elementov – 4. del: StebriFeuerwiderstandsprüfungen für tragende Bauteile - Teil 4: StützenEssais de résistance au feu des éléments porteurs - Partie 4: PoteauxFire resistance tests for loadbearing elements - Part 4: Columns91.060.99Drugi stavbni elementiOther elements of buildings13.220.50Požarna odpornost gradbenih materia
...

Questions, Comments and Discussion

Ask us and Technical Secretary will try to provide an answer. You can facilitate discussion about the standard in here.

This May Also Interest You

SIST
SIST EN 1364-5:2017(Main)
Fire resistance tests for non-loadbearing elements - Part 5: Air transfer grilles
EN 1364-5:2017

This test method specifies a method for determining the fire resistance of air transfer grilles(ATG).
It is applicable to air transfer grilles intended for installation in building components (typically walls, floors or ceilings). The orientation of the installation of the air transfer grille can be vertical or horizontal.
The closing mechanism of the air transfer grille can come from expansion of material and/or from any mechanical or electrical closing device.
This test method is valid for fire resistant or fire resistant and smoke control air transfer grilles.
This test method evaluates the behaviour of the air transfer grille when exposed to the standard fire curve described in EN 1363-1 and the standard pressure described in EN 1363-1.It is not the intention of this test to provide quantitative information on the rate of leakage of smoke and/or hot gases or on the transmission or generation of fumes under fire conditions. Such phenomena are only to be noted in describing the general behaviour of test specimens during the test.
The rate of leakage of smoke at ambient temperature or at 200°C is addressed in product technical specifications (e.g. in ETAG 026 – part 4)
All values given in this standard are nominal unless otherwise specified.
This test method is not valid for determining the fire resistance of air transfer grilles that are used in ducts because ATG  are considered as separating elements. The test method for ATG, used in ducts is described in the corresponding duct standards.
Non-mechanical fire barriers for ventilation ductwork according to EN 1366-12 are excluded.
This test method is not valid for determining the fire resistance of air transfer grilles in fire doors, shutters and openable windows as specified in EN 1634-1 and EN 1364-2, because the deformation of fire doors, shutters and openable windows in fire conditions differs from the deformation of flexible/rigid walls. Moreover the location of TC in the door standard is too specific to be handled in this standard.

  • Standard
    26 pages
    English language
    sale 10% off
    e-Library read for
    1 day
  • Draft
    17 pages
    English language
    sale 10% off
    e-Library read for
    1 day
SIST
SIST EN 15080-8:2009(Main)
Extended application of results from fire resistance tests - Part 8: Beams
EN 15080-8:2009

This part of EN 15080 identifies the parameters and factors that affect the fire resistance of beams and need to be taken into account when considering extended application of results of beams tested in accordance with EN 1365-3. It also gives the methodology to be used when preparing an extended application, including rules and calculation methods which can be applied to establish the resultant influence of a variation in one or more parameters and to determine the field of extended application.

  • Standard
    44 pages
    English language
    sale 10% off
    e-Library read for
    1 day
SIST
SIST EN 1365-5:2005(Main)
Fire resistance tests for loadbearing elements - Part 5: Balconies and walkways
EN 1365-5:2004

This Part of EN 1365 specifies a method for determining the fire resistance, in respect with loadbearing capacity and with no separating function, of:
- balconies exposed to the fire from either outside or inside the building; and
- walkways exposed to the fire from either outside or inside the building.
This standard is used in conjunction with EN 1363-1.

  • Standard
    11 pages
    English language
    sale 10% off
    e-Library read for
    1 day
SIST
SIST EN 14135:2004(Main)
Coverings - Determination of fire protection ability
EN 14135:2004

This document specifies a method for determining the ability of a covering to protect underlying products against damage during a specified fire exposure.

  • Standard
    9 pages
    English language
    sale 10% off
    e-Library read for
    1 day
SIST
SIST EN 1365-3:2001(Main)
Fire resistance tests for loadbearing elements - Part 3: Beams
EN 1365-3:1999

This part of EN 1365 specifies a method for determining the fire resistance of beams with or without applied fire protection systems and with or without cavities.  This standard is used in conjunction with prEN 1363-1. Beams which are part of a floor construction are tested with the floor construction as described in prEN 1365-2 and are subject to evaluation of integrity and insulation. General guidance on this method of test is given in annex A.

  • Standard
    14 pages
    English language
    sale 10% off
    e-Library read for
    1 day
SIST
oSIST prEN 1364-6:2022(Main)
Fire resistance tests for non-loadbearing elements - Part 6: Cavity barriers
prEN 1364-6

This test method specifies methods for determining the fire resistance of cavity barriers and is to be used in conjunction with EN 1363-1.
This document is applicable to non-loadbearing vertically or horizontally oriented closed and open cavity barriers, which are used to provide fire separation to uncompartmented or ventilated spaces. Cavity barriers are designed to provide fire separating performance and the test method is therefore based on the standard room fire exposure in EN 1363-1. Open cavity barrier specimens are installed for test in one of two ways to simulate either normal or sudden exposure to fire in use.
Ventilating cavity barriers in facades, where the fire exposure comes as a result of a breaking window and allowing a developed fire to come into contact with the façade, shall be tested as prescribed in Annex D.
This document is not applicable to cavity barriers containing penetration seals, which shall be tested to EN 1366-3.

  • Draft
    35 pages
    English language
    sale 10% off
    e-Library read for
    1 day
SIST
oSIST prEN 1364-6:2016(Main)
Fire resistance tests for non-loadbearing elements - Part 6: Cavity Barriers
prEN 1364-6

This test method specifies a method for determining the fire resistance of cavity barriers and is to be used in conjunction with EN 1363 1.
This standard is applicable to non-loadbearing vertically or horizontally oriented closed and open cavity barriers, which are used to provide fire separation to uncompartmented or ventilated spaces. Cavity barriers are designed to provide fire separating performance and the test method is therefore based on the standard room fire exposure in EN 1363 1. Open cavity barrier specimens are installed for test in one of two ways to simulate slow or sudden exposure in use.
This standard is not applicable to cavity barriers containing penetration seals, which are to be tested in accordance with EN 1366 3.

  • Draft
    30 pages
    English language
    sale 10% off
    e-Library read for
    1 day
SIST
SIST EN 1364-5:2017(Main)
Fire resistance tests for non-loadbearing elements - Part 5: Air transfer grilles
EN 1364-5:2017

This test method specifies a method for determining the fire resistance of air transfer grilles(ATG).
It is applicable to air transfer grilles intended for installation in building components (typically walls, floors or ceilings). The orientation of the installation of the air transfer grille can be vertical or horizontal.
The closing mechanism of the air transfer grille can come from expansion of material and/or from any mechanical or electrical closing device.
This test method is valid for fire resistant or fire resistant and smoke control air transfer grilles.
This test method evaluates the behaviour of the air transfer grille when exposed to the standard fire curve described in EN 1363-1 and the standard pressure described in EN 1363-1.It is not the intention of this test to provide quantitative information on the rate of leakage of smoke and/or hot gases or on the transmission or generation of fumes under fire conditions. Such phenomena are only to be noted in describing the general behaviour of test specimens during the test.
The rate of leakage of smoke at ambient temperature or at 200°C is addressed in product technical specifications (e.g. in ETAG 026 – part 4)
All values given in this standard are nominal unless otherwise specified.
This test method is not valid for determining the fire resistance of air transfer grilles that are used in ducts because ATG  are considered as separating elements. The test method for ATG, used in ducts is described in the corresponding duct standards.
Non-mechanical fire barriers for ventilation ductwork according to EN 1366-12 are excluded.
This test method is not valid for determining the fire resistance of air transfer grilles in fire doors, shutters and openable windows as specified in EN 1634-1 and EN 1364-2, because the deformation of fire doors, shutters and openable windows in fire conditions differs from the deformation of flexible/rigid walls. Moreover the location of TC in the door standard is too specific to be handled in this standard.

  • Standard
    26 pages
    English language
    sale 10% off
    e-Library read for
    1 day
  • Draft
    17 pages
    English language
    sale 10% off
    e-Library read for
    1 day
SIST
SIST EN 15080-8:2009(Main)
Extended application of results from fire resistance tests - Part 8: Beams
EN 15080-8:2009

This part of EN 15080 identifies the parameters and factors that affect the fire resistance of beams and need to be taken into account when considering extended application of results of beams tested in accordance with EN 1365-3. It also gives the methodology to be used when preparing an extended application, including rules and calculation methods which can be applied to establish the resultant influence of a variation in one or more parameters and to determine the field of extended application.

  • Standard
    44 pages
    English language
    sale 10% off
    e-Library read for
    1 day
SIST
SIST EN 1365-5:2005(Main)
Fire resistance tests for loadbearing elements - Part 5: Balconies and walkways
EN 1365-5:2004

This Part of EN 1365 specifies a method for determining the fire resistance, in respect with loadbearing capacity and with no separating function, of:
- balconies exposed to the fire from either outside or inside the building; and
- walkways exposed to the fire from either outside or inside the building.
This standard is used in conjunction with EN 1363-1.

  • Standard
    11 pages
    English language
    sale 10% off
    e-Library read for
    1 day