SIST EN 62745:2017/A11:2020
(Amendment)Safety of machinery - Requirements for cableless control systems of machinery
Safety of machinery - Requirements for cableless control systems of machinery
IEC 62745:2017(E) specifies requirements for the functionality and interfacing of cableless (for example, radio, infra-red) control systems that provide communication between operator control station(s) and the control system of a machine. Specific requirements are included for such operator control stations that are portable by the operator.
Sicherheit von Maschinen - Anforderungen für kabellose Steuerungen an Maschinen
Sécurité des machines - Exigences générales pour les systèmes de commande sans fil des machines
IEC 62745:2017 spécifie les exigences de fonctionnalité d'un système de commande sans fil, qu'il soit interfacé avec ou qu'il fasse partie intégrante d'un système de commande de machine destiné à être utilisé comme poste de commande opérateur sur une machine.
Varnost strojev - Zahteve za brezžično povezavo upravljalnikov nadzornih sistemov strojev
General Information
Relations
Standards Content (Sample)
SLOVENSKI STANDARD
SIST EN 62745:2017/A11:2020
01-december-2020
Varnost strojev - Zahteve za brezžično povezavo upravljalnikov nadzornih
sistemov strojev
Safety of machinery - Requirements for cableless control systems of machinery
Sicherheit von Maschinen - Anforderungen für kabellose Steuerungen an Maschinen
Sécurité des machines - Exigences générales pour les systèmes de commande sans fil
des machines
Ta slovenski standard je istoveten z: EN 62745:2017/A11:2020
ICS:
13.110 Varnost strojev Safety of machinery
35.100.01 Medsebojno povezovanje Open systems
odprtih sistemov na splošno interconnection in general
SIST EN 62745:2017/A11:2020 en,fr,de
2003-01.Slovenski inštitut za standardizacijo. Razmnoževanje celote ali delov tega standarda ni dovoljeno.
---------------------- Page: 1 ----------------------
SIST EN 62745:2017/A11:2020
---------------------- Page: 2 ----------------------
SIST EN 62745:2017/A11:2020
EUROPEAN STANDARD EN 62745:2017/A11
NORME EUROPÉENNE
EUROPÄISCHE NORM
June 2020
ICS 13.110; 29.020; 35.100.01
English Version
Safety of machinery - Requirements for cableless control
systems of machinery
Sécurité des machines - Exigences générales pour les Sicherheit von Maschinen - Anforderungen für kabellose
systèmes de commande sans fil des machines Steuerungen an Maschinen
This amendment A11 modifies the European Standard EN 62745:2017; it was approved by CENELEC on 2020-04-22. CENELEC members
are bound to comply with the CEN/CENELEC Internal Regulations which stipulate the conditions for giving this amendment the status of a
national standard without any alteration.
Up-to-date lists and bibliographical references concerning such national standards may be obtained on application to the CEN-CENELEC
Management Centre or to any CENELEC member.
This amendment exists in three official versions (English, French, German). A version in any other language made by translation under the
responsibility of a CENELEC member into its own language and notified to the CEN-CENELEC Management Centre has the same status as
the official versions.
CENELEC members are the national electrotechnical committees of Austria, Belgium, Bulgaria, Croatia, Cyprus, the Czech Republic,
Denmark, Estonia, Finland, France, Germany, Greece, Hungary, Iceland, Ireland, Italy, Latvia, Lithuania, Luxembourg, Malta, the
Netherlands, Norway, Poland, Portugal, Republic of North Macedonia, Romania, Serbia, Slovakia, Slovenia, Spain, Sweden, Switzerland,
Turkey and the United Kingdom.
European Committee for Electrotechnical Standardization
Comité Européen de Normalisation Electrotechnique
Europäisches Komitee für Elektrotechnische Normung
CEN-CENELEC Management Centre: Rue de la Science 23, B-1040 Brussels
© 2020 CENELEC All rights of exploitation in any form and by any means reserved worldwide for CENELEC Members.
Ref. No. EN 62745:2017/A11:2020 E
---------------------- Page: 3 ----------------------
SIST EN 62745:2017/A11:2020
EN 62745:2017/A11:2020 (E)
European foreword
This document (EN 62745:2017/A11:2020) has been prepared by CLC/TC 44X "Safety of machinery:
electrotechnical aspects".
The following dates are fixed:
• latest date by which this document has (dop) 2021-04-22
to be implemented at national level by
publication of an identical national
standard or by endorsement
• latest date by which the national (dow) 2023-04-22
standards conflicting with this document
have to be withdrawn
Attention is drawn to the possibility that some of the elements of this document may be the subject of
patent rights. CENELEC shall not be held responsible for identifying any or all such patent rights.
This document has been prepared under a mandate given to CENELEC by the European
Commission and the European Free Trade Association, and supports essential requirements of EU
Directive(s).
For the relationship with EU Directive(s) see informative Annex ZZ, which is an integral part of this
document.
2
---------------------- Page: 4 ----------------------
SIST EN 62745:2017/A11:2020
EN 62745:2017/A11:2020 (E)
1 Modification of the Annex ZA "Normative references to international
publications with their corresponding European publications"
Replace the Annex ZA with the following:
Annex ZA
(normative)
Normative references to international publications
with their corresponding European publications
The following documents, in whole or in part, are normatively referenced in this document and are
indispensable for its app
...
Questions, Comments and Discussion
Ask us and Technical Secretary will try to provide an answer. You can facilitate discussion about the standard in here.