SIST ETS 300 324-9:1997
(Main)Signalling Protocols and Switching (SPS) - V interfaces at the digital Local Exchange (LE); V5.1 interface for the support of Access Network (AN); Part 9: Test specification for the physical layer
- Abstract
Abstract Test Suite specification (ATS in TTCN) and protocol implementation extra information for testing (PIXIT) proforma V5.1 interface for support of Access Network; 2 048 kBit/s interface without concentration capability within the Access Network
- Status
- Published
- Publication Date
- 31-Oct-1997
- Technical Committee
- SPS - Signalling protocols and switching
- Current Stage
- 6060 - National Implementation/Publication (Adopted Project)
- Start Date
- 01-Nov-1997
- Due Date
- 01-Nov-1997
- Completion Date
- 01-Nov-1997
SIST ETS 300 324-9:1997 is the Slovenian adoption of ETS 300 324-9 from ETSI. It specifies conformance test methods for the physical layer of the V5.1 interface between a digital Local Exchange (LE) and an Access Network (AN), for a 2 048 kbit/s interface without concentration capability. It is aimed at engineers, test laboratories, and quality teams that need to verify V5.1 physical-layer conformance.
What does SIST ETS 300 324-9:1997 specify?
SIST ETS 300 324-9:1997 covers the physical-layer conformance test methods for the V5.1 interface defined in ETS 300 324-1, with reference to clauses 4 and 5 and subclause 14.3.2. The scope names an Abstract Test Suite (ATS) in TTCN and a Protocol Implementation extra Information for Testing (PIXIT) proforma for the V5.1 interface on a 2 048 kbit/s interface without concentration capability within the Access Network.
This part sits in the ETS 300 324 multi-part series for V5.1. The foreword places it alongside the interface specification, the PICS proforma, TSS&TP parts, ATS and partial PIXIT parts for the network and data link layers, and this physical-layer test specification. In practice, that tells a reader this document is one piece of a wider V5.1 test and specification set.
The body is short and focused: Scope, Normative references, Abbreviations, and Conformance test requirements, followed by History.
What are the key requirements of SIST ETS 300 324-9:1997?
Clause 4 ties conformance testing to ETS 300 166 and ETS 300 167. In practice, a tester uses the generic 2 048 kbit/s interface methods rather than a V5.1-specific test suite.
The same clause says the tests shall fulfil ETS 300 324-1 clauses 4 and 5 and subclause 14.3. This tells implementers which V5.1 requirements the physical-layer evidence has to support.
No additional V5.1-specific conformance tests are required. For a project team, that means the acceptance plan can stay aligned with the generic transmission standards.
ETS 300 166 provides the physical and electrical characteristics of hierarchical digital interfaces for 2 048 kbit/s-based hierarchies. That is the basis for signal and line measurements.
ETS 300 167 provides the functional characteristics of 2 048 kbit/s interfaces. That matters when the lab checks behaviour, not just electrical levels.
The scope limits the document to the physical layer of the V5.1 interface for an Access Network with no concentration capability. In practice, the standard applies to the line interface itself, not to higher protocol layers or concentration functions.
What terms does SIST ETS 300 324-9:1997 define?
Access Network (AN) - The network side supported by the V5.1 interface.
Local Exchange (LE) - The digital exchange side where the V5.1 interface is located.
V5.1 interface - The interface at the digital LE used for support of the AN.
physical layer - The transmission layer whose conformance is being tested here.
conformance testing - Testing used to check whether an implementation meets the stated standard requirements.
Abstract Test Suite (ATS) - The test suite structure used for formal conformance testing.
PIXIT - Protocol Implementation extra Information for Testing, the implementation details a laboratory needs before running tests.
Who uses SIST ETS 300 324-9:1997?
Telecom equipment vendors, conformance test laboratories, network operators, and quality or certification teams use this part when preparing, executing, or reviewing physical-layer tests for V5.1 equipment at the digital LE. It is especially relevant for PSTN and ISDN access-network equipment using 2 048 kbit/s interfaces.
Which standards are used with SIST ETS 300 324-9:1997?
| Standard or part | What it contributes |
|---|---|
| ETS 300 324-1 | The V5.1 interface specification, including the clauses referenced by this test part. |
| ETS 300 166 | Physical and electrical characteristics of hierarchical digital interfaces for 2 048 kbit/s-based hierarchies. |
| ETS 300 167 | Functional characteristics of 2 048 kbit/s interfaces. |
| ETS 300 324 parts 1-8 | The wider V5.1 series: interface specification, PICS proforma, TSS&TP, and ATS / partial PIXIT material for network and data link layers. |
What does the SIST ETS 300 324-9:1997 document contain?
SIST ETS 300 324-9:1997 is a short conformance-test document. Its content is concentrated in the scope, references, abbreviations, and conformance test requirements, with the foreword explaining where it fits in the V5.1 series.
The technical detail for actual measurements is carried by the referenced standards, especially ETS 300 166 and ETS 300 167. This part mainly tells readers which test basis to use for the V5.1 physical layer.
The history page records the publication trail and identifies it as the first edition.
Get Certified
Connect with accredited certification bodies for this standard
BSI Group
BSI (British Standards Institution) is the business standards company that helps organizations make excellence a habit.
NYCE
Mexican standards and certification body.
ANCE
Mexican certification and testing association.
Sponsored listings
Frequently Asked Questions
SIST ETS 300 324-9:1997 is a standard published by the Slovenian Institute for Standardization (SIST). Its full title is "Signalling Protocols and Switching (SPS) - V interfaces at the digital Local Exchange (LE); V5.1 interface for the support of Access Network (AN); Part 9: Test specification for the physical layer". This standard covers: Abstract Test Suite specification (ATS in TTCN) and protocol implementation extra information for testing (PIXIT) proforma V5.1 interface for support of Access Network; 2 048 kBit/s interface without concentration capability within the Access Network
Abstract Test Suite specification (ATS in TTCN) and protocol implementation extra information for testing (PIXIT) proforma V5.1 interface for support of Access Network; 2 048 kBit/s interface without concentration capability within the Access Network
SIST ETS 300 324-9:1997 is classified under the following ICS (International Classification for Standards) categories: 33.040.30 - Switching and signalling systems; 35.100.10 - Physical layer. The ICS classification helps identify the subject area and facilitates finding related standards.
SIST ETS 300 324-9:1997 is available in PDF format for immediate download after purchase. The document can be added to your cart and obtained through the secure checkout process. Digital delivery ensures instant access to the complete standard document.
Standards Content (Sample)
2003-01.Slovenski inštitut za standardizacijo. Razmnoževanje celote ali delov tega standarda ni dovoljeno.Signalling Protocols and Switching (SPS) - V interfaces at the digital Local Exchange (LE); V5.1 interface for the support of Access Network (AN); Part 9: Test specification for the physical layer35.100.10Physical layer33.040.30Komutacijski in signalizacijski sistemSwitching and signalling systemsICS:Ta slovenski standard je istoveten z:ETS 300 324-9 Edition 1SIST ETS 300 324-9:1997en01-november-1997SIST ETS 300 324-9:1997SLOVENSKI
STANDARD
EUROPEANETS 300 324-9TELECOMMUNICATIONFebruary 1996STANDARDSource: ETSI TC-SPSReference: DE/SPS-03003.3-4ICS:33.020, 33.080, 35.100.10Key words:V interface, V5 interface, PSTN, ISDN, LE, AN, testing, layer 1Signalling Protocols and Switching (SPS);V interfaces at the digital Local Exchange (LE);V5.1 interface for the support of Access Network (AN);Part 9: Test specification for the physical layerETSIEuropean Telecommunications Standards InstituteETSI SecretariatPostal address: F-06921 Sophia Antipolis CEDEX - FRANCEOffice address: 650 Route des Lucioles - Sophia Antipolis - Valbonne - FRANCEX.400: c=fr, a=atlas, p=etsi, s=secretariat - Internet: secretariat@etsi.frTel.: +33 92 94 42 00 - Fax: +33 93 65 47 16Copyright Notification: No part may be reproduced except as authorized by written permission. The copyright and theforegoing restriction extend to reproduction in all media.© European Telecommunications Standards Institute 1996. All rights reserved.SIST ETS 300 324-9:1997
Page 2ETS 300 324-9: February 1996Whilst every care has been taken in the preparation and publication of this document, errors in content,typographical or otherwise, may occur. If you have comments concerning its accuracy, please write to"ETSI Editing and Committee Support Dept." at the address shown on the title page.SIST ETS 300 324-9:1997
Page 3ETS 300 324-9: February 1996ContentsForeword.51Scope.72Normative references.73Abbreviations.74Conformance test requirements.7History.8SIST ETS 300 324-9:1997
Page 4ETS 300 324-9: February 1996Blank pageSIST ETS 300 324-9:1997
Page 5ETS 300 324-9: February 1996ForewordThis European Telecommunication Standard (ETS) has been produced by the Signalling Protocols andSwitching (SPS) Technical Committee of the European Telecommunications Standards Institute (
...