SIST EN ISO 20932-3:2020/A1:2026
(Amendment)Textiles - Determination of the elasticity of fabrics - Part 3: Narrow fabrics - Amendment 1 (ISO 20932-3:2018/AMD 1:2025)
Textiles - Determination of the elasticity of fabrics - Part 3: Narrow fabrics - Amendment 1 (ISO 20932-3:2018/AMD 1:2025)
Textilien - Bestimmung der Elastizität von textilen Flächengebilden - Teil 3: Schmaltextilien - Änderung 1 (ISO 20932-3:2018/AMD 1:2025)
Textiles - Détermination de l'élasticité des étoffes - Partie 3: Etoffes étroites - Amendement 1 (ISO 20932-3:2018/AMD 1:2025)
Tekstilije - Ugotavljanje elastičnosti tkanin - 3. del: Ozke tkanine - Dopolnilo A1 (ISO 20932-3:2018/AMD 1:2025)
General Information
Relations
Standards Content (Sample)
SLOVENSKI STANDARD
01-januar-2026
Tekstilije - Ugotavljanje elastičnosti tkanin - 3. del: Ozke tkanine - Dopolnilo A1
(ISO 20932-3:2018/AMD 1:2025)
Textiles - Determination of the elasticity of fabrics - Part 3: Narrow fabrics - Amendment
1 (ISO 20932-3:2018/AMD 1:2025)
Textilien - Bestimmung der Elastizität von textilen Flächengebilden - Teil 3:
Schmaltextilien - Änderung 1 (ISO 20932-3:2018/AMD 1:2025)
Textiles - Détermination de l'élasticité des étoffes - Partie 3: Etoffes étroites -
Amendement 1 (ISO 20932-3:2018/AMD 1:2025)
Ta slovenski standard je istoveten z: EN ISO 20932-3:2020/A1:2025
ICS:
59.080.01 Tekstilije na splošno Textiles in general
2003-01.Slovenski inštitut za standardizacijo. Razmnoževanje celote ali delov tega standarda ni dovoljeno.
EN ISO 20932-3:2020/A1
EUROPEAN STANDARD
NORME EUROPÉENNE
November 2025
EUROPÄISCHE NORM
ICS 59.080.30
English Version
Textiles - Determination of the elasticity of fabrics - Part 3:
Narrow fabrics - Amendment 1 (ISO 20932-3:2018/AMD
1:2025)
Textiles - Détermination de l'élasticité des étoffes - Textilien - Bestimmung der Elastizität von textilen
Partie 3: Étoffes étroites - Amendement 1 (ISO 20932- Flächengebilden - Teil 3: Schmaltextilien - Änderung 1
3:2018/AMD 1:2025) (ISO 20932-3:2018/AMD 1:2025)
This amendment A1 modifies the European Standard EN ISO 20932-3:2020; it was approved by CEN on 2 June 2025.
CEN members are bound to comply with the CEN/CENELEC Internal Regulations which stipulate the conditions for inclusion of
this amendment into the relevant national standard without any alteration. Up-to-date lists and bibliographical references
concerning such national standards may be obtained on application to the CEN-CENELEC Management Centre or to any CEN
member.
This amendment exists in three official versions (English, French, German). A version in any other language made by translation
under the responsibility of a CEN member into its own language and notified to the CEN-CENELEC Management Centre has the
same status as the official versions.
CEN members are the national standards bodies of Austria, Belgium, Bulgaria, Croatia, Cyprus, Czech Republic, Denmark, Estonia,
Finland, France, Germany, Greece, Hungary, Iceland, Ireland, Italy, Latvia, Lithuania, Luxembourg, Malta, Netherlands, Norway,
Poland, Portugal, Republic of North Macedonia, Romania, Serbia, Slovakia, Slovenia, Spain, Sweden, Switzerland, Türkiye and
United Kingdom.
EUROPEAN COMMITTEE FOR STANDARDIZATION
COMITÉ EUROPÉEN DE NORMALISATION
EUROPÄISCHES KOMITEE FÜR NORMUNG
CEN-CENELEC Management Centre: Rue de la Science 23, B-1040 Brussels
© 2025 CEN All rights of exploitation in any form and by any means reserved Ref. No. EN ISO 20932-3:2020/A1:2025 E
worldwide for CEN national Members.
Contents Page
European foreword . 3
European foreword
This document (EN ISO 20932-3:2020/A1:2025) has been prepared by Technical Committee ISO/TC 38
"Textiles" in collaboration with Technical Committee CEN/TC 248 “Textiles and textile products” the
secretariat of which is held by BSI.
This Amendment to the European Standard EN ISO 20932-3:2020 shall be given the status of a national
standard, either by publication of an identical text or by endorsement, at the latest by May 2026, and
conflicting national standards shall be withdrawn at the latest by May 2026.
Attention is drawn to the possibility that some of the elements of this document may be the subject of
patent rights. CEN shall not be held responsible for identifying any or all such patent rights.
Any feedback and questions on this document should be directed to the users’ national standards
body/national committee. A complete listing of these bodies can be found on the CEN website.
According to the CEN-CENELEC Internal Regulations, the national standards organizations of the
following countries are bound to implement this European Standard: Austria, Belgium, Bulgaria,
Croatia, Cyprus, Czech Republic, Denmark, Estonia, Finland, France, Germany, Greece, Hungary, Iceland,
Ireland, Italy, Latvia, Lithuania, Luxembourg, Malta, Netherlands, Norway, Poland, Portugal, Republic of
North Macedonia, Romania, Serbia, Slovakia, Slovenia, Spain, Sweden, Switzerland, Türkiye and the
United Kingdom.
Endorsement notice
The text of ISO 20932-3:2018/Amd 1:2025 has been approved by CEN as EN ISO 20932-
3:2020/A1:2025 without any modification.
International
Standard
ISO 20932-3
First edition
Textiles — Determination of the
2018-11
elasticity of fabrics —
AMENDMENT 1
Part 3:
2025-11
Narrow fabrics
AMENDMENT 1
Textiles — Détermination de l'élasticité des étoffes —
Partie 3: Étoffes étroites
AMENDEMENT 1
Reference number
ISO 20932-3:2018/Amd.1:2025(en) © ISO 2025
ISO 20932-3:2018/Amd.1:2025(en)
© ISO 2025
All rights reserved. Unless otherwise specified, or required in the context of its implementation, no part of this publication may
be reproduced or utilized otherwise in any form or by any means, electronic or mechanical, including photocopying, or posting on
the internet or an intranet, without prior written permission. Permission can be requested from either ISO at the address below
or ISO’s member body in the country of the requester.
ISO copyright office
CP 401 • Ch. de Blandonnet 8
CH-1214 Vernier, Geneva
Phone: +41 22 749 01 11
Email: copyright@iso.org
Website: www.iso.org
Published in Switzerland
ii
ISO 20932-3:2018/Amd.1:2025(en)
Foreword
ISO (the International Organization for Standardization) is a worldwide federation of national standards
bodies (ISO member bodies)
...








Questions, Comments and Discussion
Ask us and Technical Secretary will try to provide an answer. You can facilitate discussion about the standard in here.