SIST EN ISO 1043-2:2012
(Main)Plastics - Symbols and abbreviated terms - Part 2: Fillers and reinforcing materials (ISO 1043-2:2011)
Plastics - Symbols and abbreviated terms - Part 2: Fillers and reinforcing materials (ISO 1043-2:2011)
ISO 1043-2:2011 specifies uniform symbols for terms referring to fillers and reinforcing materials. It includes only those symbols that have come into established use, and its main aim is both to prevent the occurrence of more than one symbol for a given filler or reinforcing material and to prevent a given symbol being interpreted in more than one way.
Kunststoffe - Kennbuchstaben und Kurzzeichen - Teil 2: Füllstoffe und Verstärkungsstoffe (ISO 1043-2:2011)
Dieser Teil von ISO 1043 stellt einheitliche Kurzzeichen für Füll- und Verstärkungsstoffe zur Verfügung. Er
enthält nur diejenigen Kurzzeichen, die generell eingeführt sind, und er bezweckt, sowohl das Auftreten von
mehr als einem Kurzzeichen für einen bestimmten Füll- oder Verstärkungsstoff, als auch die Deutung eines
gegebenen Kurzzeichens in mehr als einer Weise zu verhindern.
ANMERKUNG Für Kennbuchstaben und Kurzzeichen für Basis-Polymere und ihre besonderen Eigenschaften siehe
ISO 1043-1, für Weichmacher siehe ISO 1043-3 und für Flammschutzmittel siehe ISO 1043-4.
Plastiques - Symboles et termes abrégés - Partie 2: Charges et matériaux de renforcement (ISO 1043-2:2011)
L'ISO 1043-2:2011 spécifie des symboles uniformes pour les termes relatifs aux charges et aux matériaux de renforcement. Elle inclut uniquement les symboles dont l'usage est établi et son objectif est double: prévenir l'apparition de plusieurs symboles pour une charge ou un matériau de renforcement donné, et empêcher qu'un symbole donné puisse être interprété de plusieurs façons différentes.
Polimerni materiali - Simboli in kratice - 2. del: Polnila in materiali za ojačenje (ISO 1043-2:2011)
Ta del standarda ISO 1043 določa enotne simbole za kratice, ki se nanašajo na polnila in materiale za ojačanje. Zajema le tiste simbole, ki se splošno uporabljajo, pri čemer je glavni cilj standarda preprečiti pojav več kot enega simbola za posamezno polnilo ali material za ojačanje in pojav več pomenov za posamezno kratico.
General Information
- Status
- Published
- Publication Date
- 06-Dec-2011
- Technical Committee
- IPMA - Polimer materials and products
- Current Stage
- 6060 - National Implementation/Publication (Adopted Project)
- Start Date
- 06-Dec-2011
- Due Date
- 10-Feb-2012
- Completion Date
- 07-Dec-2011
Relations
- Effective Date
- 01-Feb-2012
Overview
SIST EN ISO 1043-2:2012 is an international standard that defines uniform symbols and abbreviated terms specifically for fillers and reinforcing materials used in plastics. Developed by ISO/TC 61 and adopted by CEN, this standard ensures consistent communication and documentation within the plastics industry by preventing multiple symbols for the same filler or reinforcement and avoiding ambiguous interpretations of symbols. It forms part of the ISO 1043 series covering symbols for various types of additives and components in plastics.
Key Topics
- Standardized Symbols: The standard specifies standardized capital letter symbols for a range of fillers and reinforcing materials commonly used in polymer composites. Examples include:
- A for aramid fibers
- G for glass
- M for minerals
- ME for metals, with chemical symbols for specific metals (e.g., MED(Al) for aluminum powder)
- Form and Structure Identification: Additional letters represent the physical form or structure of the material, such as:
- F for fiber
- CM for chopped-strand mat
- LF for long fibers
- NF for nanofibers
- Combination of Symbols: Mixtures of materials or forms can be denoted by combining symbols using a plus sign inside parentheses, e.g., (GF+MD) represents a mix of glass fibers and mineral powder.
- Avoidance of Duplication: The standard aims to prevent duplication of symbols and multiple interpretations, enhancing clarity in technical documents, product labeling, and communication across international markets.
Applications
- Material Specification: Manufacturers and engineers use SIST EN ISO 1043-2:2012 symbols to clearly specify the type and form of fillers or reinforcement in plastic formulations.
- Technical Documentation: This standard is essential for preparing datasheets, labeling, and product information to ensure uniform understanding in technical and commercial documents globally.
- Research and Development: Facilitates clear reporting and comparison of composite materials by providing a common terminology for fillers and reinforcing elements.
- Quality Control and Compliance: Supports consistency in material classification and compliance with international regulations by standardizing the terminology used for plastic additives.
- Supply Chain Communication: Helps suppliers, manufacturers, and end-users maintain unambiguous communication concerning plastic additives, reinforcing materials, and fillers.
Related Standards
SIST EN ISO 1043-2:2012 is part of the broader ISO 1043 series addressing symbols and abbreviations for plastics:
- ISO 1043-1: Symbols and abbreviated terms for basic polymers and their special characteristics
- ISO 1043-3: Symbols for plasticizers
- ISO 1043-4: Symbols for flame retardants
By using these complementary standards together, stakeholders achieve comprehensive and unified terminology for all key components and additives in plastics.
Keywords: SIST EN ISO 1043-2:2012, plastics standard, fillers symbols, reinforcing materials abbreviations, polymer additives, composite materials, plastics terminology, international plastics standards, material symbols, ISO 1043 series, plastic fillers standard, reinforcing fibers symbols, uniform symbols for plastics
Frequently Asked Questions
SIST EN ISO 1043-2:2012 is a standard published by the Slovenian Institute for Standardization (SIST). Its full title is "Plastics - Symbols and abbreviated terms - Part 2: Fillers and reinforcing materials (ISO 1043-2:2011)". This standard covers: ISO 1043-2:2011 specifies uniform symbols for terms referring to fillers and reinforcing materials. It includes only those symbols that have come into established use, and its main aim is both to prevent the occurrence of more than one symbol for a given filler or reinforcing material and to prevent a given symbol being interpreted in more than one way.
ISO 1043-2:2011 specifies uniform symbols for terms referring to fillers and reinforcing materials. It includes only those symbols that have come into established use, and its main aim is both to prevent the occurrence of more than one symbol for a given filler or reinforcing material and to prevent a given symbol being interpreted in more than one way.
SIST EN ISO 1043-2:2012 is classified under the following ICS (International Classification for Standards) categories: 01.075 - Character symbols; 83.040.30 - Auxiliary materials and additives for plastics. The ICS classification helps identify the subject area and facilitates finding related standards.
SIST EN ISO 1043-2:2012 has the following relationships with other standards: It is inter standard links to SIST EN ISO 1043-2:2002. Understanding these relationships helps ensure you are using the most current and applicable version of the standard.
SIST EN ISO 1043-2:2012 is available in PDF format for immediate download after purchase. The document can be added to your cart and obtained through the secure checkout process. Digital delivery ensures instant access to the complete standard document.
Standards Content (Sample)
2003-01.Slovenski inštitut za standardizacijo. Razmnoževanje celote ali delov tega standarda ni dovoljeno.Kunststoffe - Kennbuchstaben und Kurzzeichen - Teil 2: Füllstoffe und Verstärkungsstoffe (ISO 1043-2:2011)Plastiques - Symboles et termes abrégés - Partie 2: Charges et matériaux de renforcement (ISO 1043-2:2011)Plastics - Symbols and abbreviated terms - Part 2: Fillers and reinforcing materials (ISO 1043-2:2011)83.040.30Pomožni materiali in aditivi za polimerne materialeAuxiliary materials and additives for plastics01.075Simboli za znakeCharacter symbolsICS:Ta slovenski standard je istoveten z:EN ISO 1043-2:2011SIST EN ISO 1043-2:2012en,fr01-februar-2012SIST EN ISO 1043-2:2012SLOVENSKI
STANDARDSIST EN ISO 1043-2:20021DGRPHãþD
EUROPEAN STANDARD NORME EUROPÉENNE EUROPÄISCHE NORM
EN ISO 1043-2
November 2011 ICS 83.040.30; 83.080.01 Supersedes EN ISO 1043-2:2001English Version
Plastics - Symbols and abbreviated terms - Part 2: Fillers and reinforcing materials (ISO 1043-2:2011)
Plastiques - Symboles et termes abrégés - Partie 2: Charges et matériaux de renforcement (ISO 1043-2:2011) Kunststoffe - Kennbuchstaben und Kurzzeichen - Teil 2: Füllstoffe und Verstärkungsstoffe (ISO 1043-2:2011) This European Standard was approved by CEN on 12 November 2011.
CEN members are bound to comply with the CEN/CENELEC Internal Regulations which stipulate the conditions for giving this European Standard the status of a national standard without any alteration. Up-to-date lists and bibliographical references concerning such national standards may be obtained on application to the CEN-CENELEC Management Centre or to any CEN member.
This European Standard exists in three official versions (English, French, German). A version in any other language made by translation under the responsibility of a CEN member into its own language and notified to the CEN-CENELEC Management Centre has the same status as the official versions.
CEN members are the national standards bodies of Austria, Belgium, Bulgaria, Croatia, Cyprus, Czech Republic, Denmark, Estonia, Finland, France, Germany, Greece, Hungary, Iceland, Ireland, Italy, Latvia, Lithuania, Luxembourg, Malta, Netherlands, Norway, Poland, Portugal, Romania, Slovakia, Slovenia, Spain, Sweden, Switzerland and United Kingdom.
EUROPEAN COMMITTEE FOR STANDARDIZATION
COMITÉ EUROPÉEN DE NORMALISATION EUROPÄISCHES KOMITEE FÜR NORMUNG
Management Centre:
Avenue Marnix 17,
B-1000 Brussels © 2011 CEN All rights of exploitation in any form and by any means reserved worldwide for CEN national Members. Ref. No. EN ISO 1043-2:2011: ESIST EN ISO 1043-2:2012
Reference numberISO 1043-2:2011(E)© ISO 2011
INTERNATIONAL STANDARD ISO1043-2Third edition2011-11-15Plastics — Symbols and abbreviated terms — Part 2: Fillers and reinforcing materials Plastiques — Symboles et termes abrégés — Partie 2: Charges et matériaux de renforcement
ISO 1043-2:2011(E) ©
ISO 2011 All rights reserved. Unless otherwise specified, no part of this publication may be reproduced or utilized in any form or by any means, electronic or mechanical, including photocopying and microfilm, without permission in writing from either ISO at the address below or ISO's member body in the country of the requester. ISO copyright office Case postale 56 CH-1211 Geneva 20 Tel.
+ 41 22 749 01 11 Fax
+ 41 22 749 09 47 E-mail
copyright@iso.org Web
www.iso.org Published in Switzerland
ii © ISO 2011 – All rights reserved
ISO 1043-2:2011(E) © ISO 2011 – All rights reserved iii Foreword ISO (the International Organization for Standardization) is a worldwide federation of national standards bodies (ISO member bodies). The work of preparing International Standards is normally carried out through ISO technical committees. Each member body interested in a subject for which a technical committee has been established has the right to be represented on that c
...
Questions, Comments and Discussion
Ask us and Technical Secretary will try to provide an answer. You can facilitate discussion about the standard in here.
Loading comments...