SIST EN 14118-3:2003

2003-01.Slovenski inštitut za standardizacijo. Razmnoževanje celote ali delov tega standarda ni dovoljeno.Verstärkungsprodukte - Spezifikation für Textilglasmatten (Glasseiden- und Endlosmatten) - Teil 3: Besondere AnforderungenRenfort - Spécifications des mats de verre textile (mats a fils coupés et mats a fils continus) - Partie 3: Exigences spécifiquesReinforcement - Specifications for textile glass mats (chopped strand and continuous filament mats) - Part 3: Specific requirements59.100.10Materiali iz steklenih vlakenTextile glass materialsICS:Ta slovenski standard je istoveten z:EN 14118-3:2003SIST EN 14118-3:2003en01-julij-2003SIST EN 14118-3:2003SLOVENSKI
STANDARD



SIST EN 14118-3:2003



EUROPEAN STANDARDNORME EUROPÉENNEEUROPÄISCHE NORMEN 14118-3February 2003ICS 59.100.10English versionReinforcement - Specifications for textile glass mats (choppedstrand and continuous filament mats) - Part 3: SpecificrequirementsRenfort - Spécifications des mats de verre textile (mats àfils coupés et mats à fils continus) - Partie 3: ExigencesspécifiquesVerstärkungsprodukte - Spezifikation für Textilglasmatten(Glasseiden- und Endlosmatten) - Teil 3: BesondereAnforderungenThis European Standard was approved by CEN on 4 December 2002.CEN members are bound to comply with the CEN/CENELEC Internal Regulations which stipulate the conditions for giving this EuropeanStandard the status of a national standard without any alteration. Up-to-date lists and bibliographical references concerning such nationalstandards may be obtained on application to the Management Centre or to any CEN member.This European Standard exists in three official versions (English, French, German). A version in any other language made by translationunder the responsibility of a CEN member into its own language and notified to the Management Centre has the same status as the officialversions.CEN members are the national standards bodies of Austria, Belgium, Czech Republic, Denmark, Finland, France, Germany, Greece,Hungary, Iceland, Ireland, Italy, Luxembourg, Malta, Netherlands, Norway, Portugal, Slovakia, Spain, Sweden, Switzerland and UnitedKingdom.EUROPEAN COMMITTEE FOR STANDARDIZATIONCOMITÉ EUROPÉEN DE NORMALISATIONEUROPÄISCHES KOMITEE FÜR NORMUNGManagement Centre: rue de Stassart, 36
B-1050 Brussels© 2003 CENAll rights of exploitation in any form and by any means reservedworldwide for CEN national Members.Ref. No. EN 14118-3:2003 ESIST EN 14118-3:2003



EN 14118-3:2003 (E)2ContentspageForeword.31Scope.42Normative references.43Terms and definitions.44Typical commercial products.45Requirements.5Bibliography.6SIST EN 14118-3:2003



EN 14118-3:2003 (E)3ForewordThis document (EN 14118-3:2003) has been prepared by Technical Committee CEN/TC 249 "Plastics", thesecretariat of which is held by IBN.This European Standard shall be given the status of a national standard, either by publication of an identical text orby endorsement, at the latest by August 2003, and conflicting national standards shall be withdrawn at the latest byAugust 2003.This standard is one part of EN 14118 which is structured as follows:¾ Reinforcement – Specifications for textile glass mats (chopped strand and continuous filament mats) –Part 1 : Designation¾ Reinforcement – Specifications for textile glass mats (chopped strand and continuous filament mats) –Part 2 : Methods of test and general requirements¾ Reinforcement – Specifications for textile glass mats (chopped strand and continuous filament mats) –Part 3 : Specific requirement
...