59.100.10 - Textile glass materials

ISO 5025:2017 specifies a method for determining the width and length of a woven-fabric reinforcement in the form of a roll[1] . [1] Attention is drawn to ISO 22198 which is a related International Standard dealing with textiles.

ISO 2797:2017 establishes a basis for a specification for textile glass rovings, whether direct rovings or assembled rovings.

MINOR AMENDMENT     MINOR AMENDMENT     MINOR AMENDMENT    MINOR AMENDMENT

MINOR AMENDMENT     MINOR AMENDMENT     MINOR AMENDMENT    MINOR AMENDMENT

ISO 1887:2014 specifies a method for the determination of the combustible-matter content of products made from textile glass, such as continuous-filament yarns, staple-fibre yarns, rovings, chopped strands, milled fibres, fabrics, chopped-strand and continuous-filament mats, and other glass reinforcements.

ISO 3342:2011 specifies a method for the determination of the tensile breaking force of textile glass mats. The method is intended for chopped-strand mat but is equally applicable to certain types of continuous-strand mat usually intended for pultrusion.

ISO 2559:2011 provides a basis for specifications which is applicable only to textile glass mats that are made from chopped or continuous strands bonded together by chemical or mechanical means and that are used for the reinforcement of plastics. It is not applicable to surfacing mats, staple-fibre mats or glass mats (or bats) of the type used for thermal and acoustic insulation.

ISO 4604:2011 specifies a method of determining the conventional flexural stiffness of reinforcement fabrics by means of a fixed-angle flexometer. This method is not suitable for testing fabrics that are limp or that have a marked tendency to curl or twist or fray.

ISO 4900:2011 specifies a method for the determination of the contact mouldability of textile glass mats and fabrics. NOTE The hand lay-up method of moulding is generally not regarded as lending itself to objective determinations. However, if the process is carried out by the same operator, useful comparisons can be drawn between results obtained with different mats or fabrics.

ISO 3598:2011 provides a basis for a specification applicable to textile glass yarns (strands, slivers, single yarns, folded yarns and cable yarns). It does not apply to textured yarns, rovings, chopped strands, milled fibres, pre-impregnated yarns, etc. It does not cover all requirements for specialized applications. Where such other requirements are necessary, they are, or will be, given in other appropriate International Standards.

ISO 8516:2011 provides a basis for a specification applicable to textured yarns made from single or folded yarns of textile glass. Textured glass yarns can be produced by several types of process. They can be made starting either from a single strand or from two or more strands in which one or more have been "opened" to give the "bulky" aspect of textured yarn. Textured glass yarn is used in various applications, for example insulation, filtration, the manufacture of decorative textiles, the rei...view more

ISO 3343:2010 specifies a method for determining the twist balance index of folded yarn and cabled yarn made from textile glass, carbon, aramid or any other reinforcement fibre.

ISO 2558:2010 specifies a method of determining the time taken for a tensile load to break the bond between the strands of a textile glass chopped-strand mat, used for the reinforcement of plastics, which is immersed in styrene.

ISO 3375:2009 specifies a method for the determination of the stiffness of textile glass rovings.