Calibration of tuneable laser sources (IEC 62522:2014)

This International Standard provides a stable and reproducible procedure to calibrate the
wavelength and power output of a tuneable laser against reference instrumentation such as
optical power meters and optical wavelength meters (including optical frequency meters) that
have been previously traceably calibrated.

Kalibrierung von abstimmbaren Laserquellen (IEC 62522:2014)

Étalonnage des sources laser accordables (CEI 62522:2014)

L'IEC 62522:2014 fournit une procédure stable et reproductible pour étalonner la longueur d'onde et la puissance de sortie d'un laser accordable en fonction des instruments de référence tels que des appareils de mesure de la puissance optique et des appareils de mesure de longueur d'onde optique (y compris des fréquencemètres optiques) dont la traçabilité a été préalablement étalonnée. Mots clés: étalonner la longueur d'onde et la puissance de sortie d'un laser accordable

Umerjanje nastavljivih laserskih virov (IEC 62522:2014)

General Information

Status
Published
Publication Date
10-Jun-2015
Technical Committee
Current Stage
6060 - National Implementation/Publication (Adopted Project)
Start Date
09-Jan-2015
Due Date
16-Mar-2015
Completion Date
11-Jun-2015

Relations

Buy Standard

Standard
EN 62522:2015
English language
40 pages
sale 10% off
Preview
sale 10% off
Preview
e-Library read for
1 day

Standards Content (Sample)


SLOVENSKI STANDARD
01-julij-2015
Umerjanje nastavljivih laserskih virov (IEC 62522:2014)
Calibration of tuneable laser sources (IEC 62522:2014)
Kalibrierung von abstimmbaren Laserquellen (IEC 62522:2014)
Étalonnage des sources laser accordables (CEI 62522:2014)
Ta slovenski standard je istoveten z: EN 62522:2014
ICS:
17.180.01 2SWLNDLQRSWLþQDPHUMHQMDQD Optics and optical
VSORãQR measurements in general
31.260 Optoelektronika, laserska Optoelectronics. Laser
oprema equipment
2003-01.Slovenski inštitut za standardizacijo. Razmnoževanje celote ali delov tega standarda ni dovoljeno.

EUROPEAN STANDARD EN 62522
NORME EUROPÉENNE
EUROPÄISCHE NORM
July 2014
ICS 31.260; 33.180.01
English Version
Calibration of tuneable laser sources
(IEC 62522:2014)
Étalonnage des sources laser accordables Kalibrierung von abstimmbaren Laserquellen
(CEI 62522:2014) (IEC 62522:2014)
This European Standard was approved by CENELEC on 2014-03-21. CENELEC members are bound to comply with the CEN/CENELEC
Internal Regulations which stipulate the conditions for giving this European Standard the status of a national standard without any alteration.
Up-to-date lists and bibliographical references concerning such national standards may be obtained on application to the CEN-CENELEC
Management Centre or to any CENELEC member.
This European Standard exists in three official versions (English, French, German). A version in any other language made by translation
under the responsibility of a CENELEC member into its own language and notified to the CEN-CENELEC Management Centre has the
same status as the official versions.
CENELEC members are the national electrotechnical committees of Austria, Belgium, Bulgaria, Croatia, Cyprus, the Czech Republic,
Denmark, Estonia, Finland, Former Yugoslav Republic of Macedonia, France, Germany, Greece, Hungary, Iceland, Ireland, Italy, Latvia,
Lithuania, Luxembourg, Malta, the Netherlands, Norway, Poland, Portugal, Romania, Slovakia, Slovenia, Spain, Sweden, Switzerland,
Turkey and the United Kingdom.

European Committee for Electrotechnical Standardization
Comité Européen de Normalisation Electrotechnique
Europäisches Komitee für Elektrotechnische Normung
CEN-CENELEC Management Centre: Avenue Marnix 17, B-1000 Brussels
© 2014 CENELEC All rights of exploitation in any form and by any means reserved worldwide for CENELEC Members.
Ref. No. EN 62522:2014 E
Foreword
The text of document 86/443/CDV, future edition 1 of IEC 62522, prepared by IEC TC 86 "Fibre
optics" was submitted to the IEC-CENELEC parallel vote and approved by CENELEC as
The following dates are fixed:
– latest date by which the document has to be implemented at (dop) 2014-10-18
national level by publication of an identical national
standard or by endorsement
– latest date by which the national standards conflicting with (dow) 2017-03-21
the document have to be withdrawn

Attention is drawn to the possibility that some of the elements of this document may be the subject of
patent rights. CENELEC [and/or CEN] shall not be held responsible for identifying any or all such
patent rights.
Endorsement notice
The text of the International Standard IEC 62522:2014 was approved by CENELEC as a European
Standard without any modification.
In the official version, for Bibliography, the following notes have to be added for the standards indicated:
IEC 60027-3 NOTE Harmonised as EN 60027-3.
IEC 60359 NOTE Harmonised as EN 60359.
IEC 60793-1 (Series) NOTE Harmonised in EN 60793-1 (Series)
IEC 60793-2 (Series) NOTE Harmonised in EN 60793-2 (Series)
IEC 61280-1-3:2010 NOTE Harmonised as EN 61280-1-3:2010.
IEC 61300-3-2 NOTE Harmonised as EN 61300-3-2
IEC 61315 NOTE Harmonised as EN 61315

- 3 - EN 62522:2014
Annex ZA
(normative)
Normative references to international publications
with their corresponding European publications
The following documents, in whole or in part, are normatively referenced in this document and are
indispensable for its application. For dated references, only the edition cited applies. For undated
references, the latest edition of the referenced document (including any amendments) applies.
NOTE 1 When an International Publication has been modified by common modifications, indicated by (mod), the relevant
EN/HD applies.
NOTE 2 Up-to-date information on the latest versions of the European Standards listed in this annex is available here:
www.cenelec.eu
Publication Year Title EN/HD Year
IEC 60793-2-50 -  Optical fibres -- Part 2-50: Product EN 60793-2-50 -
specifications - Sectional specification for
class B single-mode fibres
IEC 60825-1 -  Safety of laser products -- Part 1: EN 60825-1 -
Equipment classification and requirements
IEC 60825-2 -  Safety of laser products -- Part 2: Safety of EN 60825-2 -
optical fibre communication systems
(OFCS)
IEC 62129-2 -  Calibration of wavelength/optical frequency EN 62129-2 -
measurement instruments -- Part 2:
Michelson interferometer single
wavelength meters
ISO/IEC 17025 -  General requirements for the competence EN ISO/IEC 17025 -
of testing and calibration laboratories
ISO/IEC Guide 98-3 2008 Uncertainty of measurement -- Part 3: - -
Guide to the expression of uncertainty in
measurement (GUM:1995)
ISO/IEC Guide 99 2007 International vocabulary of metrology - - -
Basic and general concepts and
associated terms (VIM)
IEC 62522 ®
Edition 1.0 2014-02
INTERNATIONAL
STANDARD
NORME
INTERNATIONALE
Calibration of tuneable laser sources

Étalonnage des sources laser accordables

INTERNATIONAL
ELECTROTECHNICAL
COMMISSION
COMMISSION
ELECTROTECHNIQUE
PRICE CODE
INTERNATIONALE
CODE PRIX W
ICS 31.260; 33.180.01 ISBN 978-2-8322-1411-4

– 2 – IEC 62522:2014 © IEC 2014
CONTENTS
FOREWORD . 4
INTRODUCTION . 6
1 Scope . 7
2 Normative references . 7
3 Terms, definitions and abbreviations . 7
3.1 Terms and definitions . 7
3.2 Abbreviations . 10
4 Preparation for calibration . 10
4.1 Organization. 10
4.2 Traceability . 10
4.3 Preparation . 10
4.4 Reference calibration conditions . 11
5 Wavelength calibration . 11
5.1 Overview . 11
5.2 Wavelength calibration at reference conditions . 11
5.2.1 Set-up . 11
5.2.2 Calibration equipment . 11
5.2.3 Procedure for wavelength calibration . 12
5.2.4 Dependence on conditions . 12
5.2.5 Uncertainty at reference conditions . 14
5.3 Wavelength calibration at operating conditions . 15
5.3.1 General . 15
5.3.2 Optical power dependence . 15
5.3.3 Uncertainty at operating conditions . 16
6 Optical power calibration . 16
6.1 Overview . 16
6.2 Optical power calibration at reference conditions . 17
6.2.1 Set-up . 17
6.2.2 Calibration equipment . 17
6.2.3 Procedure for power calibration at reference conditions . 17
6.2.4 Dependence on conditions . 18
6.2.5 Uncertainty at reference conditions . 21
6.3 Optical power calibration at operating conditions . 22
6.3.1 General . 22
6.3.2 Wavelength dependence . 22
6.3.3 Uncertainty at operating conditions . 23
7 Documentation . 23
7.1 Calibration data and uncertainty . 23
7.2 Calibration conditions . 23
Annex A (normative) Mathematical basis . 25
A.1 General . 25
A.2 Type A evaluation of uncertainty . 25
A.3 Type B evaluation of uncertainty . 26
A.4 Determining the combined standard uncertainty . 26
A.5 Reporting . 27
Annex B (informative) Averaged wavelength (or power) deviation over a certain range . 28

IEC 62522:2014 © IEC 2014 – 3 –
Annex C (informative) Other testing . 30
C.1 General . 30
C.2 Wavelength resolution . 30
C.2.1 Set-up . 30
C.2.2 Testing equipment . 30
C.2.3 Testing procedure for determining wavelength resolution . 30
C.3 Optical power resolution . 31
C.3.1 Set-up . 31
C.3.2 Testing equipment . 31
C.3.3 Testing procedure for optical power resolution . 31
C.4 Signal to source spontaneous emission ratio . 32
C.4.1 Set-up . 32
C.4.2 Testing equipment . 32
C.4.3 Testing procedure for determining signal to source spontaneous
emission ratio . 32
C.5 Side mode suppression ratio . 33
C.5.1 General . 33
C.5.2 Set-up . 33
C.5.3 Testing equipment . 34
C.5.4 Testing procedure . 34
Bibliography .
...

Questions, Comments and Discussion

Ask us and Technical Secretary will try to provide an answer. You can facilitate discussion about the standard in here.