iTeh StandardsiTeh Standards
EURUSD
Your shopping cart is empty.
SIST

SIST EN 12427:2001

(Main)

Industrial, commercial and garage doors and gates - Air permeability - Test method

Industrial, commercial and garage doors and gates - Air permeability - Test method

1.1 General This European Standard specifies a test method for determining the air permeability for doors in a closed position. The doors are intended for installation in areas in the reach of people, for which the main in-tended uses are giving safe access for goods, vehicles and persons in industrial, commercial or residential premises. The doors may be manually or power operated. This document applies to all doors provided in accordance with prEN 13 241:1998. 1.2 Exclusions It does not apply to: - lock gates and dock gates; - doors on lifts;
- doors on vehicles; - armoured doors; - doors mainly for the retention of animals; - theatre textile curtains; - horizontally moving doors less than 2,5 m wide and 6,25 m2 area, designed principally for pedestrian use; - revolving doors of any size; - doors outside the reach of  people (such as crane gantry fences); - railway barriers; - barriers used solely for vehicles.

Tore - Luftdurchlässigkeit - Prüfverfahren

1.1 Allgemeines Diese Europäische Norm legt ein Prüfverfahren zur Bestimmung des Widerstandes gegen Luftdurchlässigkeit für
Tore in geschlossener Stellung fest. Die Tore sind für den Einbau in Zugangsbereichen von Personen vorgesehen, wobei deren Hauptaufgaben darin bestehen, für Waren- und Fahrzeugverkehr sichere Zufahrt und Personen sicheren Zutritt zu Industrie-, Gewerbe-oder Wohnanlagen zu ermöglichen. Die Tore dürfen hand- oder kraftbetätigt sein. Diese Norm gilt für alle Tore nach prEN 13241:1998. 1.2 Ausnahmen Sie gilt nicht für: - Schleusentore und Docktore; - Türen in Aufzügen; - Türen in Fahrzeugen; - gepanzerte Türen; - Tore, die hauptsächlich zum Zurückhalten von Tieren vorgesehen sind; - textile Theatervorhänge; - horizontal bewegbare Tore mit einer Breite von weniger als 2,5 m und einer Fläche von weniger als 6,25 m2, die hauptsächlich für die Benutzung durch Fußgänger ausgelegt sind; - Drehtüren von beliebiger Größe; - Tore außerhalb der Reichweite von Personen (wie z. B. Schutzgitter für Portalkräne);
- Eisenbahnschranken; - ausschließlich für den Fahrzeugverkehr verwendete Schranken.

Portes équipant les locaux industriels, commerciaux et les garages - Perméabilité a l'air - Méthode d'essai

1.1 Généralité La présente norme définit une méthode d'essai permettant de déterminer la résistance a la perméabilité a l'air des portes en position fermée. Les portes sont destinées a etre installées dans des zones accessibles aux personnes dont l'utilisation principale prévue est de donner un acces sans danger aux marchandises, aux véhicules et aux personnes dans des locaux industriels, commerciaux ou résidentiels. Les portes peuvent etre manoeuvrées manuellement ou motorisées. Le présent document s'applique a toutes les portes prévues conformément au prEN 13241:1998. 1.2 Exclusions Elle ne s'applique pas : - aux portails fermés a clé et aux grilles d'entrée de docks ; - aux portes d'ascenseurs ; - aux portes de véhicules ; - aux portes blindées ; - aux portes principalement utilisées pour la retenue des animaux ; - aux rideaux en tissu de théâtres ; - aux portes manoeuvrées horizontalement ayant une largeur inférieure a 2,5 m et une surface inférieure a 6,25 m2 principalement destinées a l'usage des piétons ; - aux portes tambours quelles que soient leurs dimensions ;
- aux portes hors d'atteinte des personnes (comme les barrieres sur les portiques de grue) ; - aux barrieres de passages a niveau ; - aux barrieres exclusivement destinées a la circulation automobile.

Vrata v industrijske in javne prostore ter garažna vrata - Prepustnost zraka - Preskusna metoda

General Information

Status
Published
Publication Date
31-Aug-2001
ICS
91.060.50 - Doors and windows
91.090 - External structures
Technical Committee
ISTP - Doors and windows
Current Stage
6060 - National Implementation/Publication (Adopted Project)
Start Date
01-Sep-2001
Due Date
01-Sep-2001
Completion Date
01-Sep-2001
Directive
89/106/EEC - Construction products
Mandate
M/101 - Mandate to CEN/CENELEC concerning the execution of standardization work for harmonized standards on doors, windows and related products
Ref Project
EN 12427:2000 - Industrial, commercial and garage doors and gates - Air permeability - Test method

Relations

Revises
oSIST prEN 12427:2021 - Industrial, commercial and garage doors and gates - Air permeability - Test method
Effective Date
18-Jan-2023
Revises
oSIST prEN 12427:2021 - Industrial, commercial and garage doors and gates - Air permeability - Test method
Effective Date
19-Jan-2023
Revised
oSIST prEN 12427:2021 - Industrial, commercial and garage doors and gates - Air permeability - Test method
Effective Date
01-Jan-2021

Buy Standard

EN 12427:2001EN 12427:2001
PreviousNext
Standard
EN 12427:2001
English language
7 pages
sale 10% off
Preview
sale 10% off
Preview
e-Library read for
1 day

Standards Content (Sample)

2003-01.Slovenski inštitut za standardizacijo. Razmnoževanje celote ali delov tega standarda ni dovoljeno.Vrata v industrijske in javne prostore ter garažna vrata - Prepustnost zraka - Preskusna metodaTore - Luftdurchlässigkeit - PrüfverfahrenPortes équipant les locaux industriels, commerciaux et les garages - Perméabilité a l'air - Méthode d'essaiIndustrial, commercial and garage doors and gates - Air perm
...

Questions, Comments and Discussion

Ask us and Technical Secretary will try to provide an answer. You can facilitate discussion about the standard in here.

This May Also Interest You

SIST
SIST EN 12453:2017+A1:2022(Main)
Industrial, commercial and garage doors and gates - Safety in use of power operated doors - Requirements and test methods
EN 12453:2017+A1:2021

This European Standard specifies requirements and test methods for the safety in use of power operated door, gate and barrier, intended for installation in areas in the reach of persons, and for which the main intended use is  giving safe access for goods and vehicles accompanied or driven by persons in industrial, commercial or residential premises.
This European Standard also covers power operated vertically moving commercial doors such as rolling shutters and rolling grilles, used in retail premises which are mainly provided for goods protection.
This European Standard deals with all significant hazards, hazardous situations and events relevant to the power operation of industrial, commercial and garage doors, and gates when they are used as intended and under conditions of misuse which are reasonably foreseeable as identified in Clause 4.
All lifetime phases of the machinery including transportation, assembly, dismantling, disabling and scrapping are considered by this standard.
This European Standard does not apply to
-   lock gates and dock gates;
-   doors on lifts;
-   doors on vehicles;
-   armoured doors;
-   doors mainly for the retention of animals, unless they are at the site perimeter ;
-   theatre textile curtains;
-   horizontally moving power operated doors mainly intended for pedestrian use;
-   doors outside the reach of people (such as crane gantry fences);
-   railway barriers;
-   barriers intended solely for use by pedestrians;
-   barriers used solely for vehicles on motorways.
Whenever the term "door" is used in this document, it shall be deemed to cover the full scope of types and variances of doors, gates and barriers in the scope of this Standard.
This European Standard does not deal with any specific requirements on noise emitted from power operated door, gate and barrier, intended for installation in areas in the reach of persons, and for which the main intended use is giving safe access for goods and vehicles accompanied or driven by persons in industrial, commercial or residential premises as their noise emission is not considered to be a relevant hazard.
NOTE   Noise emission of power operated doors is not a significant hazard for the users of these products. It is a comfort aspect.
This European Standard is not applicable to machinery which are manufactured before the date of publication of the standard.

  • Standard
    68 pages
    English language
    sale 10% off
    e-Library read for
    1 day
SIST
SIST EN 12604:2017+A1:2021(Main)
Industrial, commercial and garage doors and gates - Mechanical aspects - Requirements and test methods
EN 12604:2017+A1:2020

This European Standard specifies mechanical requirements and test methods for manually operated doors, gates and barriers, intended for installation in areas in the reach of persons, and for which the main intended use is giving safe access for goods and vehicles accompanied or driven by persons in industrial, commercial or residential premises.
This European Standard also covers manually operated vertically moving commercial doors such as rolling shutters and rolling grilles, used in retail premises which are mainly provided for goods protection.
This document applies only to doors which are not part of the load carrying structure of the building.
It does not apply to:
—   lock gates and dock gates;
—   doors on vehicles;
—   doors mainly for the retention of animals unless they are at the site perimeter;
—   doors intended for pedestrian use;
—   railway barriers.
Whenever the term “door” is used in this document, it is deemed to cover the full scope of types and variances of doors, gates and barriers defined by the scope of this European Standard.

  • Standard
    19 pages
    English language
    sale 10% off
    e-Library read for
    1 day
SIST
SIST EN 13241:2003+A2:2016(Main)
Industrial, commercial, garage doors and gates - Product standard, performance characteristics
EN 13241:2003+A2:2016

1.1   General
This European Standard specifies the safety and performance requirements, except resistance to fire and smoke control characteristics, for industrial, commercial, garage doors and gates and barriers, intended for installation in areas in the reach of persons, and for which the main intended uses are giving safe access for goods and vehicles accompanied or driven by persons in industrial, commercial or residential premises.
Fire resisting and/or smoke control characteristics for industrial, commercial, garage doors and gates are covered by EN 16034.
This European Standard also covers commercial doors such as rolling shutters and rolling grilles used in retail premises which are mainly provided for the access of persons rather than vehicles or goods.
These doors can include pass doors incorporated in the door leaf which are also covered by this European Standard.
These devices can be manually or power operated.
This European Standard does not cover operation in environments where the electromagnetic disturbances are outside the range of those specified in EN 61000 6 3.
1.2   Exclusions
This European Standard does not apply to the following which are intended for a different use:
-   lock gates and dock gates;
-   doors on lifts;
-   doors on vehicles;
-   armoured doors;
-   doors mainly for the retention of animals;
-   theatre textile curtains;
-   horizontally moving power operated doors mainly intended for pedestrian use in accordance with EN 16361;
-   revolving doors of any size;
-   railway barriers;
-   barriers used solely for vehicles.
This European Standard does not cover the radio part of doors. If a radio operating device is used, the relevant ETSI standards should be applied in addition.
This European Standard does not contain any specific requirement for doors which are moving because of energy stored by dedicated means from human power such as manually tensioned springs.
This European Standard does not contain any specific requirements for doors on escape routes. The ability to open the door leaf safely and easily cannot normally be achieved by industrial, commercial and garage doors due to size, weight and/or mode of operation.
The noise emission of powered doors and gates is not considered to be a relevant hazard. Therefore this European Standard does not contain any specific requirements on noise in relation to the Machinery Directive.
1.3   Specific applications
This European Standard should also apply to power operated doors which have been created by the addition of power operation to an installed manual door in respect of the relevant requirements. Annex ZA does not apply to this kind of door.
It also identifies requirements and classes of performance for additional characteristics considered to be of importance to the trade.
When a door is part of the load carrying structure of the building the requirements of this European Standard can apply on a voluntary basis in addition to the requirements for the load carrying structure, which are not dealt with in this European Standard. Annex ZA does not apply for this kind of doors.

  • Standard
    28 pages
    English language
    sale 10% off
    e-Library read for
    1 day
  • Standard
    30 pages
    German language
    sale 10% off
    e-Library read for
    1 day
SIST
SIST EN 12428:2013(Main)
Industrial, commercial and garage doors and gates - Thermal transmittance - Requirements for classification
EN 12428:2013

This European Standard specifies a method for calculating the thermal transmittance of industrial, commercial and garage doors in a closed position. The doors are intended for installation in areas in the reach of people, for which the main intended uses are giving safe access for goods, vehicles and persons in industrial, commercial or residential premises. The doors may be manually or power operated. This document applies to all doors provided in accordance with EN 13241-1. The calculation can include different types of glazing, frames with or without thermal breaks, and different types of opaque panels and thermal bridge effects at the edge of the panel or joint between the glazed area, the frame area and the panel area. This paper does not include the effects of solar radiation, heat transfer caused by air leakage, calculation of condensation, additional heat transfer at the corners and edges of the door connections to the main building structure, or thermal effects between the door and the main building structure.

  • Standard
    14 pages
    English language
    sale 10% off
    e-Library read for
    1 day
SIST
SIST EN 12978:2003+A1:2009(Main)
Industrial, commercial and garage doors and gates - Safety devices for power operated doors and gates - Requirements and test methods
EN 12978:2003+A1:2009

1.1   General
This European Standard applies for design, construction and testing of sensitive protective devices where the device is used to detect pedestrians including in particular applications, slow moving elderly persons, slow moving disabled persons and children who may be exposed to injury by power operated doors, gates and barriers, electrically powered from a public supply and intended for installation in areas in the reach of persons, and for which the main intended uses are giving safe access for goods and vehicles accompanied or driven by persons in industrial, commercial, public or residential premises.
This standard also covers safety devices for commercial doors such as rolling shutters and rolling grilles when used as doors on retail premises which are mainly provided for the access of persons rather than vehicles or goods.
This standard deals with all significant hazards listed in annex A and specifies requirements to eliminate or minimise them.
This standard covers the requirements for electrical powered safety devices using mains supply provided for installation on or used in conjunction with powered doors in order to avoid hazardous situations which can be encountered when a door is used normally.
The sensitive protective device is designed to give a change in the output signal switching device which may be used to provide protection for the person being at risk. It applies to ready to use sensitive protective device and integrated sensitive protective device (mounted on or connected to a power operated door in normal use).
This standard only applies to door safety devices manufactured after the date of publication.
1.2   Exclusions
This European Standard does not apply to protective equipment for installation on doors which are intended for a different use than the one described above such as:
-   lock gates and dock gates;
-   doors on lifts;
-   doors on vehicles;
-   doors mainly for the retention of animals;
-   theatre textile curtains;

  • Standard
    33 pages
    English language
    sale 10% off
    e-Library read for
    1 day
  • Standard
    33 pages
    German language
    sale 10% off
    e-Library read for
    1 day
SIST
SIST EN 12635:2003+A1:2009(Main)
Industrial, commercial and garage doors and gates - Installation and use
EN 12635:2002+A1:2008

This European Standard specifies the information to be provided by the door manufacturer and the components manufacturer to ensure safe installation, operation, use (including maintenance and repair) of doors, gates and barriers intended for installation in areas in the reach of persons, and for which the main intended uses are giving safe access for goods and vehicles accompanied or driven by persons in industrial, commercial or residential premises. This European Standard also covers commercial doors such as rolling shutters and rolling grilles used in retail premises which are mainly provided for the access of persons rather than vehicles or goods. This European Standard applies to manually operated and power operated doors, to doors and components intended to be installed by "non professional installers" and may also apply to the installation and use of upgrading component(s). The European Standard only applies to the doors and components manufactured after the date of publication. This European Standard does not apply to doors that are intended for a different use than the one described in 1.1 such as: - lock gates and dock gates; - doors on lifts; - doors on vehicles; - doors mainly for the retention of animals; - theatre textile curtains; - railway barriers; - barriers used solely for vehicles. This European Standard does not apply to machinery other than power operated doors. This European Standard does not cover operation in environments where the electromagnetic disturbances are outside the range of those specified in EN 61000-6-2 or for domestic garage doors those specified in EN 55014-2. This European Standard does not cover: - products to be used in potential explosive atmosphere or on armoured doors; - programmable devices (see IEC 61508 series); - shock resistance of component (example IK code). These exclusions are based on technology used at the publication time of this standard. When a door is part of the load carrying structure of the building, the load carrying function is not dealt with in this European Standard.

  • Standard
    16 pages
    English language
    sale 10% off
    e-Library read for
    1 day
  • Standard
    16 pages
    German language
    sale 10% off
    e-Library read for
    1 day
  • Standard – translation
    18 pages
    Slovenian language
    sale 10% off
    e-Library read for
    1 day
SIST
SIST EN 12424:2001(Main)
Industrial, commercial and garage doors and gates - Resistance to wind load - Classification
EN 12424:2000

1.1 General This European Standard specifies the classification for wind load for doors in a closed posi-tion. The doors are intended for installation in areas in the reach of people, for which the main intended uses are giving safe access for goods, vehicles and persons in industrial, commer-cial or residential premises.The doors may be manually or power operated. NOTE In case of wind load it is not necessary that the door can be opened or closed. This document applies to all doors provided in accordance with prEN 13241:1998. 1.2 Exclusions It does not apply to: - lock gates and dock gates; - doors on lifts; - doors on vehicles; - armoured doors; - doors mainly for the retention of animals; - theatre textile curtains; - horizontally moving doors less than 2,5 m wide and 6,25 m2 area, designed principally for
pedestrian use; - revolving doors of any size; - doors outside the reach of people (such as crane gantry fences); - railway barriers; - barriers used solely for vehicles.

  • Standard
    5 pages
    English language
    sale 10% off
    e-Library read for
    1 day
  • Standard
    4 pages
    German language
    sale 10% off
    e-Library read for
    1 day
SIST
SIST EN 12425:2001(Main)
Industrial, commercial and garage doors and gates - Resistance to water penetration - Classification
EN 12425:2000

1.1 General This European Standard specifies the classification for resistance to water penetration for doors in a closed position, when tested in accordance with EN 12489. The doors are intended for installation in areas in the reach of people, for which the main in-tended
uses are giving safe access for goods, vehicles and persons in industrial, commercial or residential premises. The doors may be manually or power operated. This document applies to all doors provided in accordance with prEN 13241:1998. 1.2 Exclusions It does not apply to: - lock gates and dock gates; - doors on lifts; - doors on vehicles; - armoured doors; - doors mainly for the retention of animals; - theatre textile curtains; - horizontally moving doors less than 2,5 m wide and 6,25 m2 area, designed principally for pedestrian use; - revolving doors of any size; - doors outside the reach of people (such as crane gantry fences); - railway barriers; - barriers used solely for vehicles.

  • Standard
    4 pages
    English language
    sale 10% off
    e-Library read for
    1 day
SIST
SIST EN 12426:2001(Main)
Industrial, commercial and garage doors and gates - Air permeability - Classification
EN 12426:2000

1.1 General This European Standard specifies the classification for air permeability for doors in a closed position, when tested in accordance with EN 12427. The doors are intended for installation in areas in the reach of people, for which the main in-tended uses are giving safe access for goods, vehicles and persons in industrial, commercial or residential premises. The doors may be manually or power operated. This document applies to all doors provided in accordance with prEN 13241:1998. 1.2 Exclusions It does not apply to: - lock gates and dock gates; - doors on lifts; - doors on vehicles; - armoured doors; - doors mainly for the retention of animals; - theatre textile curtains; - horizontally moving doors less than 2,5 m wide and 6,25 m2 area, designed principally for pedestrian use; - revolving doors of any size; - doors outside the reach of people (such as crane gantry fences); - railway barriers; - barriers used solely for vehicles.

  • Standard
    4 pages
    English language
    sale 10% off
    e-Library read for
    1 day
SIST
SIST EN 12489:2001(Main)
Industrial, commercial and garage doors and gates - Resistance to water penetration - Test method
EN 12489:2000

1.1 General This European Standard specifies the test method for determining the resistance to water penetration for doors in a closed position. The doors are intended for installation in areas in the reach of people, for which the main intended uses are giving safe access for goods, vehicles and persons in industrial, commer-cial or residential premises. The doors may be manually or power operated. This document applies to all doors provided in accordance with prEN 13 241:1998. 1.2 Exclusions It does not apply to: - lock gates and dock gates; - doors on lifts; - doors on vehicles; - armoured doors; - doors mainly for the retention of animals; - theatre textile curtains; - horizontally moving doors less than 2,5 m wide and 6,25 m2 area, designed principally for pedestrian use; - revolving doors of any size;
- doors outside the reach of people (such as crane gantry fences); - railway barriers; - barriers used solely for vehicles.

  • Standard
    12 pages
    English language
    sale 10% off
    e-Library read for
    1 day