SIST EN 1011-2:2001/A1:2004
(Amendment)Welding - Recommendations for welding of metallic materials - Part 2: Arc welding of ferritic steels
Welding - Recommendations for welding of metallic materials - Part 2: Arc welding of ferritic steels
This European Standard gives guidance for manual, semi-mechanised, mechanised and automatic arc welding of ferritic steels(see clause 5), excluding ferritic stainless steels, in all product forms.
Schweißen - Empfehlungen zum Schweißen metallischer Werkstoffe - Teil 2: Lichtbogenschweißen von ferritischen Stählen
Diese Europäische Norm gibt Empfehlungen für manuelles, teilmechanisches, vollmechanisches und automatisches Lichtbogenschweißen ferritischer Stähle in allen Erzeugnisarten (siehe Abschnitt 5), ausgenommen nichtrostende ferritische Stähle.
Soudage - Recommendations pour le soudage des matériaux métalliques - Partie 2 : Soudage a l'arc des aciers ferritiques
La présente Norme européenne constitue un guide pour le soudage manuel à l'arc, semi-automatique et automatique des aciers ferritiques (voir article 5), à l'exception des aciers inoxydables ferritiques, dans toutes les formes de livraison.
Varjenje - Priporočila za varjenje kovinskih materialov - 2. del: Obločno varjenje feritnih jekel
General Information
Relations
Overview
EN 1011-2:2001/A1:2003 - published by CEN - is a European recommendation for the arc welding of ferritic steels. The standard provides guidance for manual, semi‑mechanised, mechanised and automatic arc welding of ferritic steels (excluding ferritic stainless steels) in all product forms. Amendment A1 (2003) updates EN 1011-2:2001 and includes editorial and structural changes (for example the deletion of Annex ZA); CEN members were required to adopt the amendment by mid‑2004.
Key Topics
The standard addresses practical welding guidance and quality considerations for ferritic steels. Major technical topics typically covered include:
- Welding processes and process selection (manual, semi‑mechanised, mechanised, automatic arc welding)
- Welding procedure guidance and factors affecting procedure development
- Joint preparation and fit‑up best practices for consistent weld quality
- Consumables and filler material considerations appropriate to ferritic steels
- Control of heat input, preheat and interpass conditions to manage metallurgical properties
- Measures to avoid weld defects (for example those associated with hydrogen, cracking and lack of fusion)
- Inspection and testing recommendations to verify weld integrity and workmanship
- Weldability considerations for different ferritic steel product forms
Note: the standard explicitly excludes ferritic stainless steels and focuses on ferritic carbon and low‑alloy steels as defined in the document.
Applications
EN 1011-2 is intended to be used where reliable arc‑welded ferritic steel fabrication is required across sectors such as:
- Structural steelwork and civil engineering components
- Pressure vessels and piping (where ferritic steels are applicable)
- Mechanical and industrial fabrication (frames, tanks, supports)
- Automated manufacturing lines using mechanised or automatic arc welding
The guidance helps organizations produce consistent welding procedures, reduce rework, control weld quality and support conformity with contractual or regulatory requirements.
Who uses this standard
- Welding engineers and procedure developers
- Fabricators and welding supervisors
- Welding inspectors and quality assurance personnel
- Design engineers specifying welding requirements
- National standards bodies and certification organizations
Related Standards
- Other parts of the EN 1011 series (general guidance on welding of metallic materials)
- Applicable CEN and national welding procedure and qualification standards
Keywords: EN 1011-2:2001/A1:2003, arc welding of ferritic steels, welding recommendations, CEN standard, manual welding, mechanised welding, welding procedures, weld quality.
Standards Content (Sample)
SLOVENSKI STANDARD
01-junij-2004
9DUMHQMH3ULSRURþLOD]DYDUMHQMHNRYLQVNLKPDWHULDORYGHO 2EORþQRYDUMHQMH
IHULWQLKMHNHO
Welding - Recommendations for welding of metallic materials - Part 2: Arc welding of
ferritic steels
Schweißen - Empfehlungen zum Schweißen metallischer Werkstoffe - Teil 2:
Lichtbogenschweißen von ferritischen Stählen
Soudage - Recommendations pour le soudage des matériaux métalliques - Partie 2 :
Soudage a l'arc des aciers ferritiques
Ta slovenski standard je istoveten z: EN 1011-2:2001/A1:2003
ICS:
25.160.10 Varilni postopki in varjenje Welding processes
77.080.20 Jekla Steels
2003-01.Slovenski inštitut za standardizacijo. Razmnoževanje celote ali delov tega standarda ni dovoljeno.
EUROPEAN STANDARD
EN 1011-2:2001/A1
NORME EUROPÉENNE
EUROPÄISCHE NORM
December 2003
ICS 25.160.10
English version
Welding - Recommendations for welding of metallic materials -
Part 2: Arc welding of ferritic steels
Soudage - Recommendations pour le soudage des Schweißen - Empfehlungen zum Schweißen metallischer
matériaux métalliques - Partie 2 : Soudage à l'arc des Werkstoffe - Teil 2: Lichtbogenschweißen von ferritischen
aciers ferritiques Stählen
This amendment A1 modifies the European Standard EN 1011-2:2001; it was approved by CEN on 20 November 2003.
CEN members are bound to comply with the CEN/CENELEC Internal Regulations which stipulate the conditions for inclusion of this
amendment into the relevant national standard without any alteration. Up-to-date lists and bibliographical references concerning such
national standards may be obtained on application to the Central Secretariat or to any CEN member.
This amendment exists in three official versions (English, French, German). A version in any other language made by translation under the
responsibility of a CEN member into its own language and notified to the Central Secretariat has the same status as the official versions.
CEN members are the national standards bodies of Austria, Belgium, Czech Republic, Denmark, Finland, France, Germany, Greece,
Hungary, Iceland, Ireland, Italy, Luxembourg, Malta, Netherlands, Norway, Portugal, Slovakia, Spain, Sweden, Switzerland and United
Kingdom.
EUROPEAN COMMITTEE FOR STANDARDIZATION
COMITÉ EUROPÉEN DE NORMALISATION
EUROPÄISCHE
...
Frequently Asked Questions
SIST EN 1011-2:2001/A1:2004 is a amendment published by the Slovenian Institute for Standardization (SIST). Its full title is "Welding - Recommendations for welding of metallic materials - Part 2: Arc welding of ferritic steels". This standard covers: This European Standard gives guidance for manual, semi-mechanised, mechanised and automatic arc welding of ferritic steels(see clause 5), excluding ferritic stainless steels, in all product forms.
This European Standard gives guidance for manual, semi-mechanised, mechanised and automatic arc welding of ferritic steels(see clause 5), excluding ferritic stainless steels, in all product forms.
SIST EN 1011-2:2001/A1:2004 is classified under the following ICS (International Classification for Standards) categories: 25.160.10 - Welding processes; 77.080.20 - Steels. The ICS classification helps identify the subject area and facilitates finding related standards.
SIST EN 1011-2:2001/A1:2004 has the following relationships with other standards: It is inter standard links to SIST EN 1011-2:2001. Understanding these relationships helps ensure you are using the most current and applicable version of the standard.
SIST EN 1011-2:2001/A1:2004 is associated with the following European legislation: EU Directives/Regulations: 97/23/EC; Standardization Mandates: M/071. When a standard is cited in the Official Journal of the European Union, products manufactured in conformity with it benefit from a presumption of conformity with the essential requirements of the corresponding EU directive or regulation.
You can purchase SIST EN 1011-2:2001/A1:2004 directly from iTeh Standards. The document is available in PDF format and is delivered instantly after payment. Add the standard to your cart and complete the secure checkout process. iTeh Standards is an authorized distributor of SIST standards.
Questions, Comments and Discussion
Ask us and Technical Secretary will try to provide an answer. You can facilitate discussion about the standard in here.
Loading comments...