SIST EN 15714-1:2011
(Main)Industrial valves - Actuators - Part 1: Terminology and definitions
Industrial valves - Actuators - Part 1: Terminology and definitions
This document defines specific terms and definitions used for industrial valve actuators not included in EN 736-2 and EN 736-3.
Industriearmaturen - Antriebe - Teil 1: Begriffe und Definitionen
Dieses Dokument legt spezifische Begriffe und Definitionen fest, die für Stellantriebe von Industriearmaturen verwendet werden und nicht in EN 736-2 und EN 736-3 enthalten sind.
Robinetterie industrielle - Actionneurs - Partie 1: Terminologie et définitions
Le présent document définit les termes et définitions spécifiques utilisés pour les actionneurs pour robinetterie
industrielle ne faisant pas partie de l'EN 736-2 ou de l'EN 736-3.
Industrijski ventili - Pogoni - 1. del: Terminologija in definicije
Ta dokument opredeljuje specifične izraze in definicije, ki se uporabljajo za industrijske pogone za ventile, ki niso vključeni v EN 736-2 in EN 736-3.
General Information
Standards Content (Sample)
2003-01.Slovenski inštitut za standardizacijo. Razmnoževanje celote ali delov tega standarda ni dovoljeno.Industrijski ventili - Pogoni - 1. del: Terminologija in definicijeIndustriearmaturen - Antriebe - Teil 1: Begriffe und DefinitionenRobinetterie industrielle - Actionneurs - Partie 1: Terminologie et
définitionsIndustrial valves - Actuators - Part 1: Terminology and definitions23.060.20Zapirni ventili (kroglasti in pipe)Ball and plug valves01.040.23Fluid systems and components for general use (Vocabularies)ICS:Ta slovenski standard je istoveten z:EN 15714-1:2009SIST EN 15714-1:2011en,fr,de01-november-2011SIST EN 15714-1:2011SLOVENSKI
STANDARD
EUROPEAN STANDARD NORME EUROPÉENNE EUROPÄISCHE NORM
EN 15714-1
October 2009 ICS 01.040.23; 23.060.20 English Version
Industrial valves - Actuators - Part 1: Terminology and definitions Robinetterie industrielle - Actionneurs - Partie 1: Terminologie et définitions
Industriearmaturen - Antriebe - Teil 1: Begriffe und Definitionen This European Standard was approved by CEN on 12 September 2009.
CEN members are bound to comply with the CEN/CENELEC Internal Regulations which stipulate the conditions for giving this European Standard the status of a national standard without any alteration. Up-to-date lists and bibliographical references concerning such national standards may be obtained on application to the CEN Management Centre or to any CEN member.
This European Standard exists in three official versions (English, French, German). A version in any other language made by translation under the responsibility of a CEN member into its own language and notified to the CEN Management Centre has the same status as the official versions.
CEN members are the national standards bodies of Austria, Belgium, Bulgaria, Cyprus, Czech Republic, Denmark, Estonia, Finland, France, Germany, Greece, Hungary, Iceland, Ireland, Italy, Latvia, Lithuania, Luxembourg, Malta, Netherlands, Norway, Poland, Portugal, Romania, Slovakia, Slovenia, Spain, Sweden, Switzerland and United Kingdom.
EUROPEAN COMMITTEE FOR STANDARDIZATION
COMITÉ EUROPÉEN DE NORMALISATION EUROPÄISCHES KOMITEE FÜR NORMUNG
Management Centre:
Avenue Marnix 17,
B-1000 Brussels © 2009 CEN All rights of exploitation in any form and by any means reserved worldwide for CEN national Members. Ref. No. EN 15714-1:2009: ESIST EN 15714-1:2011
3 Foreword This document (EN 15714-1:2009) has been prepared by Technical Committee CEN/TC 69 “Industrial valves”, the secretariat of which is held by AFNOR. This European Standard shall be given the status of a national standard, either by publication of an identical text or by endorsement, at the latest by April 2010, and conflicting national standards shall be withdrawn at the latest by April 2010. Attention is drawn to the possibility that some of the elements of this document may be the subject of patent rights. CEN [and/or CENELEC] shall not be held responsible for identifying any or all such patent rights. According to the CEN/CENELEC Internal Regulations, the national standards organizations of the following countries are bound to implement this European Standard: Austria, Belgium, Bulgaria, Cyprus, Czech Republic, Denmark, Estonia, Finland, France, Germany, Greece, Hungary, Iceland, Ireland, Italy, Latvia, Lithuania, Luxembourg, Malta, Netherlands, Norway, Poland, Portugal, Romania, Slovakia, Slovenia, Spain, Sweden, Switzerland and United Kingdom. SIST EN 15714-1:2011
...
Questions, Comments and Discussion
Ask us and Technical Secretary will try to provide an answer. You can facilitate discussion about the standard in here.