SIST EN 15427:2008/kFprA1:2010

SLOVENSKI STANDARD
SIST EN 15427:2008/kFprA1:2010
01-julij-2010
Železniške naprave - Trenje na stiku kolo-tirnica - Mazanje kolesnega venca -
Dopolnilo A1
Railway applications - Wheel/rail friction management - Flange lubrication
Bahnanwendungen - Behandlung der Reibung zwischen Rad und Schiene -
Spurkranzschmierung
Applications ferroviaires - Gestion des frottements roue/rail - Lubrification des boudins de
roues
Ta slovenski standard je istoveten z: EN 15427:2008/FprA1
ICS:
21.260 Mazalni sistemi Lubrication systems
45.040 Materiali in deli za železniško Materials and components
tehniko for railway engineering
SIST EN 15427:2008/kFprA1:2010 en,fr
2003-01.Slovenski inštitut za standardizacijo. Razmnoževanje celote ali delov tega standarda ni dovoljeno.

---------------------- Page: 1 ----------------------

SIST EN 15427:2008/kFprA1:2010

---------------------- Page: 2 ----------------------

SIST EN 15427:2008/kFprA1:2010


EUROPEAN STANDARD
FINAL DRAFT
EN 15427:2008
NORME EUROPÉENNE

EUROPÄISCHE NORM
FprA1
May 2010
ICS 21.060; 45.040
English Version
Railway applications - Wheel/rail friction management - Flange
lubrication
Applications ferroviaires - Gestion des frottements roue/rail Bahnanwendungen - Behandlung der Reibung zwischen
- Lubrification des boudins de roues Rad und Schiene - Spurkranzschmierung
This draft amendment is submitted to CEN members for unique acceptance procedure. It has been drawn up by the Technical Committee
CEN/TC 256.

This draft amendment A1, if approved, will modify the European Standard EN 15427:2008. If this draft becomes an amendment, CEN
members are bound to comply with the CEN/CENELEC Internal Regulations which stipulate the conditions for inclusion of this amendment
into the relevant national standard without any alteration.

This draft amendment was established by CEN in three official versions (English, French, German). A version in any other language made
by translation under the responsibility of a CEN member into its own language and notified to the CEN Management Centre has the same
status as the official versions.

CEN members are the national standards bodies of Austria, Belgium, Bulgaria, Croatia, Cyprus, Czech Republic, Denmark, Estonia,
Finland, France, Germany, Greece, Hungary, Iceland, Ireland, Italy, Latvia, Lithuania, Luxembourg, Malta, Netherlands, Norway, Poland,
Portugal, Romania, Slovakia, Slovenia, Spain, Sweden, Switzerland and United Kingdom.



Warning : This document is not a European Standard. It is distributed for review and comments. It is subject to change without notice and
shall not be referred to as a European Standard.


EUROPEAN COMMITTEE FOR STANDARDIZATION
COMITÉ EUROPÉEN DE NORMALISATION

EUROPÄISCHES KOMITEE FÜR NORMUNG

Management Centre: Avenue Marnix 17, B-1000 Brussels
© 2010 CEN All rights of exploitation in any form and by any means reserved Ref. No. EN 15427:2008/FprA1:2010: E
worldwide for CEN national Members.

---------------------- Page: 3 ----------------------

SIST EN 15427:2008/kFprA1:2010
EN 15427:2008/FprA1:2010 (E)
Contents Page
Foreword .3
1 Modification to the Foreword .4
2 Modification to Annex ZA, Annex ZA (informative) Relationship between this European
Standard and the Essential Requirements of EU Directive 2008/57/EC.5

2

---------------------- Page: 4 ----------------------

SIST EN 15427:2008/kFprA1:2010
EN 15427:2008/FprA1:2010 (E)
Foreword
This document (EN 15427:2008/FprA1:2010) has b
...