SIST ISO 18128:2024

International
Standard
ISO 18128
First edition
Information and documentation —
2024-03
Records risks — Risk assessment
for records management
Reference number
© ISO 2024
All rights reserved. Unless otherwise specified, or required in the context of its implementation, no part of this publication may
be reproduced or utilized otherwise in any form or by any means, electronic or mechanical, including photocopying, or posting on
the internet or an intranet, without prior written permission. Permission can be requested from either ISO at the address below
or ISO’s member body in the country of the requester.
ISO copyright office
CP 401 • Ch. de Blandonnet 8
CH-1214 Vernier, Geneva
Phone: +41 22 749 01 11
Email: copyright@iso.org
Website: www.iso.org
Published in Switzerland
ii
Contents Page
Foreword .iv
Introduction .v
1 Scope . 1
2 Normative references . 1
3 Terms and definitions . 1
3.1 Terms specific to risk . .2
3.2 Terms specific to records .2
4 Core concepts . . 3
4.1 Issues and concerns about uncertainty .3
5 Determining scope, context and criteria . 4
5.1 General .4
5.2 Defining the scope .4
5.3 External and internal context .5
5.3.1 General .5
5.3.2 External context .5
5.3.3 Internal context .5
5.4 Definition of records risk criteria.5
5.5 Risk description .6
6 Uses of risk assessment techniques . 7
7 Risk identification . 7
7.1 General .7
7.2 Techniques for identifying risks .8
7.2.1 General .8
7.2.2 Checklist analysis for risk identification .9
8 Risk analysis . 9
8.1 General .9
8.2 Techniques for analysing risks .10
8.2.1 General .10
8.2.2 Business impact analysis (BIA) .10
8.2.3 Human reliability analysis (HRA) .11
8.2.4 Bow tie analysis . 12
9 Risk evaluation .13
9.1 General . 13
9.2 Techniques for evaluating risk . 13
9.2.1 As low as reasonably practicable (ALARP). 13
9.2.2 Reliability-centred maintenance (RCM) .14
9.2.3 Risk indices .16
9.2.4 Cost/benefit analysis.18
Annex A (informative) Categorization of techniques following IEC 31010 .20
Annex B (informative) Checklist of uncertainties .22
Bibliography .26

iii
Foreword
ISO (the International Organization for Standardization) is a worldwide federation of national standards
bodies (ISO member bodies). The work of preparing International Standards is normally carried out through
ISO technical committees. Each member body interested in a subject for which a technical committee
has been established has the right to be represented on that committee. International organizations,
governmental and non-governmental, in liaison with ISO, also take part in the work. ISO collaborates closely
with the International Electrotechnical Commission (IEC) on all matters of electrotechnical standardization.
The procedures used to develop this document and those intended for its further maintenance are described
in the ISO/IEC Directives, Part 1. In particular, the different approval criteria needed for the different types
of ISO document should be noted. This document was drafted in accordance with the editorial rules of the
ISO/IEC Directives, Part 2 (see www.iso.org/directives).
ISO draws attention to the possibility that the implementation of this document may involve the use of (a)
patent(s). ISO takes no position concerning the evidence, validity or applicability of any claimed patent
rights in respect thereof. As of the date of publication of this document, ISO had not received notice of (a)
patent(s) which may be required to implement this document. However, implementers are cautioned that
this may not represent the latest information, which may be obtained from the patent database available at
www.iso.org/patents. ISO shall not be held responsible for identifying any or all such patent rights.
Any trade name used in this document is information given for the convenience of users and does not
constitute an endorsement.
For an explanation of the voluntary nature of standards, the meaning of ISO specific terms and expressions
related to conformity assessment, as well as information about ISO's adherence to the World Trade
Organization (WTO) principles in the Technical Barriers to Trade (TBT), see www.iso.org/iso/foreword.html.
This document was prepared by Technical Committee ISO/TC 46, Information and documentation,
Subcommittee SC 11, Archives/records management.
Any feedback or questions on this document should be directed to the user’s national standards body. A
complete listing of these bodies can be found at www.iso.org/members.html.

iv
Introduction
Successful organizations identify and manage all their business risks. Identifying and managing the risks to
records processes, controls and systems (records risks) is the responsibility of the organization’s records
professionals.
This document is intended to help records professionals and people who have responsibility for records in
their organization to assess records risks.
This is distinct from the task of identifying and assessing the organization’s business risks to which creating
and keeping adequate records is one strategic response. The decisions to create records or not in response to
general business risks are business decisions, which should be informed by the analysis of the organization’s
records requirements undertaken by records professionals together with business managers. The premise
of this document is that the organization has created records of its business activities to meet operational
and other purposes and has established at least minimal mechanisms for the systematic management of the
records.
The consequence of records risk events can be the loss of, or damage to, records, which are therefore no
longer useable, reliable, authentic, complete, or unaltered, and therefore can fail to meet the organization’s
purposes.
The document provides guidance and examples based on the general risk management process established
in ISO 31000 (see Figure 1) to apply to records risks, including information on relevant risk assessment tools
and techniques. It covers the risk assessment components:
a) risk identification,
b) risk analysis, and
c) risk evaluation.
This document introduces and explains selected techniques from IEC 31010 that are applicable in a records
management environment (see Table A.2 for the list of techniques).
The results of the assessment of records risk should be incorporated into the organization’s general risk
management framework. Consequently, the organization will have better control of its records and their
quality for business purposes.
This document does not deal with risk treatment. Once the assessment of records risks has been completed,
the assessed risks are documented and communicated to the organization’s risk management section.
Response to the assessed risks should be undertaken as part of the organization’s overall risk management
program. The priority assigned by the records professional to the assessed risks is provided to inform the
organization’s decisions about managing those risks.

v
NOTE Source ISO 31000:2018, Figure 4
Figure 1 — Risk management process

vi
International Standard ISO
...