SIST EN IEC 60335-2-26:2026

SLOVENSKI STANDARD
01-april-2026
Nadomešča:
SIST EN 60335-2-26:2003
SIST EN 60335-2-26:2003/A1:2008
SIST EN 60335-2-26:2003/A11:2020
Gospodinjski in podobni električni aparati - Varnost - 2-26. del: Posebne zahteve
za ure (IEC 60335-2-26:2024)
Household and similar electrical appliances - Safety - Part 2-26: Particular requirements
for clocks (IEC 60335-2-26:2024)
Sicherheit elektrischer Geräte für den Hausgebrauch und ähnliche Zwecke - Teil 2-26:
Besondere Anforderungen für Uhren (IEC 60335-2-26:2024)
Appareils électrodomestiques et analogues - Sécurité - Partie 2-26: Exigences
particulières pour les horloges (IEC 60335-2-26:2024)
Ta slovenski standard je istoveten z: EN IEC 60335-2-26:2026
ICS:
13.120 Varnost na domu Domestic safety
39.040.20 Stenske ure Clocks
2003-01.Slovenski inštitut za standardizacijo. Razmnoževanje celote ali delov tega standarda ni dovoljeno.

EUROPEAN STANDARD EN IEC 60335-2-26

NORME EUROPÉENNE
EUROPÄISCHE NORM February 2026
ICS 13.120; 97.040.50 Supersedes EN 60335-2-26:2003; EN 60335-2-
26:2003/A1:2008; EN 60335-2-26:2003/A11:2020
English Version
Household and similar electrical appliances - Safety - Part 2-26:
Particular requirements for clocks
(IEC 60335-2-26:2024)
Appareils électrodomestiques et analogues - Sécurité - Sicherheit elektrischer Geräte für den Hausgebrauch und
Partie 2-26: Exigences particulières pour les horloges ähnliche Zwecke - Teil 2-26: Besondere Anforderungen für
(IEC 60335-2-26:2024) Uhren
(IEC 60335-2-26:2024)
This European Standard was approved by CENELEC on 2025-12-22. CENELEC members are bound to comply with the CEN/CENELEC
Internal Regulations which stipulate the conditions for giving this European Standard the status of a national standard without any alteration.
Up-to-date lists and bibliographical references concerning such national standards may be obtained on application to the CEN-CENELEC
Management Centre or to any CENELEC member.
This European Standard exists in three official versions (English, French, German). A version in any other language made by translation
under the responsibility of a CENELEC member into its own language and notified to the CEN-CENELEC Management Centre has the
same status as the official versions.
CENELEC members are the national electrotechnical committees of Austria, Belgium, Bulgaria, Croatia, Cyprus, the Czech Republic,
Denmark, Estonia, Finland, France, Germany, Greece, Hungary, Iceland, Ireland, Italy, Latvia, Lithuania, Luxembourg, Malta, the
Netherlands, Norway, Poland, Portugal, Republic of North Macedonia, Romania, Serbia, Slovakia, Slovenia, Spain, Sweden, Switzerland,
Türkiye and the United Kingdom.

European Committee for Electrotechnical Standardization
Comité Européen de Normalisation Electrotechnique
Europäisches Komitee für Elektrotechnische Normung
CEN-CENELEC Management Centre: Rue de la Science 23, B-1040 Brussels
© 2026 CENELEC All rights of exploitation in any form and by any means reserved worldwide for CENELEC Members.
Ref. No. EN IEC 60335-2-26:2026 E

European foreword
This document (EN IEC 60335-2-26:2026) consists of the text of document IEC 60335-2-26:2024,
prepared by IEC/TC 61 "Safety of household and similar electrical appliances".
The following dates are fixed:
• latest date by which this document has to be (dop) 2027-02-28
implemented at national level by publication of an
identical national standard or by endorsement
• latest date by which the national standards (dow) 2029-02-28
conflicting with this document have to be withdrawn
This document supersedes EN 60335-2-26:2003 and all of its amendments and corrigenda (if any).
Attention is drawn to the possibility that some of the elements of this document may be the subject of
patent rights. CENELEC shall not be held responsible for identifying any or all such patent rights.
This document is read in conjunction with EN IEC 60335-2-26:2026/A11:2026.
Any feedback and questions on this document should be directed to the users’ national committee. A
complete listing of these bodies can be found on the CENELEC website.
Endorsement notice
The text of the International Standard IEC 60335-2-26:2024 was approved by CENELEC as a European
Standard without any modification.

IEC 60335-2-26 ®
Edition 5.0 2024-08
INTERNATIONAL
STANDARD
NORME
INTERNATIONALE
Household and similar electrical appliances – Safety –

Part 2-26: Particular requirements for clocks

Appareils électrodomestiques et analogues – Sécurité –

Partie 2-26: Exigences particulières pour les horloges

INTERNATIONAL
ELECTROTECHNICAL
COMMISSION
COMMISSION
ELECTROTECHNIQUE
INTERNATIONALE
ICS 13.120, 97.040.50 ISBN 978-2-8322-9561-8

– 2 – IEC 60335-2-26:2024 © IEC 2024
CONTENTS
FOREWORD . 4
INTRODUCTION . 7
1 Scope . 8
2 Normative references . 9
3 Terms and definitions . 9
4 General requirement . 9
5 General conditions for the tests . 9
6 Classification . 9
7 Marking and instructions . 9
8 Protection against access to live parts . 9
9 Starting of motor-operated appliances . 10
10 Power input and current . 10
11 Heating . 10
12 Charging of metal-ion batteries . 11
13 Leakage current and electric strength at operating temperature . 11
14 Transient overvoltages . 11
15 Moisture resistance . 11
16 Leakage current and electric strength . 11
17 Overload protection of transformers and associated circuits . 11
18 Endurance . 11
19 Abnormal operation . 11
20 Stability and mechanical hazards . 11
21 Mechanical strength . 12
22 Construction . 12
23 Internal wiring . 12
24 Components . 12
25 Supply connection and external flexible cords . 12
26 Terminals for external conductors . 13
27 Provision for earthing . 13
28 Screws and connections . 13
29 Clearances, creepage distances and solid insulation . 13
30 Resistance to heat and fire . 13
31 Resistance to rusting . 13
32 Radiation, toxicity and similar hazards . 13
Annexes . 17
Annex B (normative) Battery-operated appliances, separable batteries and detachable
batteries for battery-operated appliances . 18
Bibliography . 19

Figure 101 – Examples of clocks within the scope of this standard. 14
Figure 102 – Examples of clocks out of the scope of this standard . 15
Figure 103 – Probe for measuring surface temperatures . 16

IEC 60335-2-26:2024 © IEC 2024 – 3 –
Table 101 – Maximum temperature rises for specified external accessible surfaces
under normal operating conditions . 10

– 4 – IEC 60335-2-26:2024 © IEC 2024
INTERNATIONAL ELECTROTECHNICAL COMMISSION
____________
HOUSEHOLD AND SIMILAR ELECTRICAL APPLIANCES –
SAFETY –
Part 2-26: Particular requirements for clocks

FOREWORD
1) The International Electrotechnical Commission (IEC) is a worldwide organization for standardization comprising
all national electrotechnical committees (IEC National Committees). The object of IEC is to promote international
co-operation on all questions concerning standardization in the electrical and electronic fields. To this end and
in addition to other activities, IEC publishes International Standards, Technical Specifications, Technical Reports,
Publicly Available Specifications (PAS) and Guides (hereafter referred to as “IEC Publication(s)”). Their
preparation is entrusted to technical committees; any IEC National Committee interested in the subject dealt with
may participate in this preparatory work. International, governmental and non-governmental organizations liaising
with the IEC also participate in this preparation. IEC collaborates closely with the International Organization for
Standardization (ISO) in accordance with conditions determined by agreement between the two organizations.
2) The formal decisions or agreements of IEC on technical matters express, as nearly as possible, an international
consensus of opinion on the relevant subjects since each technical committee has representation from all
interested IEC National Committees.
3) IEC Publications have the form of recommendations for international use and are accepted by IEC National
Committees in that sense. While all reasonable efforts are made to ensure that the technical content of IEC
Publications is accurate, IEC cannot be held responsible for the way in which they are used or for any
misinterpretation by any end user.
4) In order to promote international uniformity, IEC National Committees undertake to apply IEC Publications
transparently to the maximum extent possible in their national and regional publications. Any divergence between
any IEC Publication and the corresponding national or regional publication shall be clearly indicated in the latter.
5) IEC itself does not provide any attestation of conformity. Independent certification bodies provide conformity
assessment services and, in some areas, access to IEC marks of conformity. IEC is not responsible for any
services carried out by independent certification bodies.
6) All users should ensure that they have the latest edition of this publication.
7) No liability shall attach to IEC or its directors, employees, servants or agents including individual experts and
members of its technical committees and IEC National Committees for any personal injury, property damage or
other damage of any nature whatsoever, whether direct or indirect, or for costs (including legal fees) and
expenses arising out of the publication, use of, or reliance upon, this IEC Publication or any other IEC
Publications.
8) Attention is drawn to the Normative references cited in this publication. Use of the referenced publications is
indispensable for the correct application of this publication.
9) IEC draws attention to the possibility that the implementation of this document may involve the use of (a)
patent(s). IEC takes no position concerning the evidence, validity or applicability of any claimed patent rights in
respect 'èèthereof. As of the date of publication of this document, IEC had not received notice of (a) patent(s),
which may be required to implement this document. However, implementers are cautioned that this may not
represent the latest information, which may be obtained from the patent database available at
https://patents.iec.ch. IEC shall not be held responsible for identifying any or all such patent rights.
IEC 60335-2-26 has been prepared by IEC technical committee 61: Safety of household and
similar electrical appliances. It is an International Standard.
This fifth edition cancels and replaces the fourth edition published in 2002 and Amendment 1:
2008. This edition constitutes a technical revision.
This edition includes the following significant technical changes with respect to the previous
edition:
a) alignment with IEC 60335-1:2020;
b) conversion of some notes to normative text (Clause 1);
c) application of test probe 19 (8.1.1, 20.2, B.22.3, B.22.4);
d) introduction of limits on the temperature rise of external accessible surfaces (Clause 11).

IEC 60335-2-26:2024 © IEC 2024 – 5 –
The text of this International Standard is based on the following documents:
Draft Report on voting
61/7266/FDIS 61/7284/RVD
Full information on the voting for its approval can be found in the report on voting indicated in
the above table.
The language used for the development of this International Standard is English.
This document was drafted in accordance with ISO/IEC Directives, Part 2, and developed in
accordance with ISO/IEC Directives, Part 1 and ISO/IEC Directives, IEC Supplement, available
at www.iec.ch/members_experts/refdocs. The main document types developed by IEC are
described in greater detail at www.iec.ch/publications.
A list of all parts of the IEC 60335 series, under the general title: Household and similar
electrical appliances – Safety, can be found on the IEC website.
This part 2 is to be used in conjunction with the latest edition of IEC 60335-1 and its
amendments unless that edition precludes it; in that case, the latest edition that does not
preclude it is used. It was established on the basis of the sixth edition (2020) of that standard.
NOTE 1 When “Part 1” is mentioned in this standard, it refers to IEC 60335-1.
This part 2 supplements or modifies the corresponding clauses in IEC 60335-1, so as to convert
that publication into the IEC standard: Particular requirements for clocks.
When a particular subclause of Part 1 is not mentioned in this part 2, that subclause applies as
far as is reasonable. When this standard states “addition”, “modification” or “replacement”, the
relevant text in Part 1 is to be adapted accordingly.
NOTE 2 The following numbering system is used:
– subclauses, tables and figures that are numbered starting from 101 are additional to those in Part 1;
– unless notes are in a
...