SIST EN 13807:2017
(Main)Transportable gas cylinders - Battery vehicles and multiple-element gas containers (MEGCs) - Design, manufacture, identification and testing
Transportable gas cylinders - Battery vehicles and multiple-element gas containers (MEGCs) - Design, manufacture, identification and testing
This European Standard specifies the requirements for the design, manufacture, identification and testing of battery vehicles and multiple-element gas containers (MEGCs) containing cylinders, tubes or bundles of cylinders. It is applicable to battery vehicles containing compressed gas, liquefied gas and mixtures thereof. It is also applicable to battery vehicles for dissolved acetylene. This European Standard is not applicable to toxic gases with an LC50 value less than or equal to 200 ml/m3.
This European Standard applies also to battery vehicles and MEGCs containing bundles of cylinders connected by a manifold which are dis-assembled from the battery vehicle and filled individually.
This European Standard does not apply to battery vehicles and MEGCs containing pressure drums or tanks, or to multi-element gas containers (MEGCs).
This European Standard does not specify requirements for the vehicle chassis or motive unit.
This European standard does not cover requirements for sea transportation.
This European Standard is primarily intended for industrial gases other than Liquefied Petroleum Gases (LPG). At the time of publication of this European Standard, there is no European Standard for dedicated LPG battery vehicles.
Where there is any conflict between this European Standard and any applicable regulation, the regulation always takes precedence.
Ortsbewegliche Gasflaschen - Batterie-Fahrzeuge und Gascontainer mit mehreren Elementen (MEGCs) - Auslegung, Herstellung, Kennzeichnung und Prüfung
Diese Europäische Norm legt die Anforderungen an die Auslegung, Herstellung, Kennzeichnung und Prüfung von Batterie Fahrzeugen und Gascontainern mit mehreren Elementen (MEGCs) fest, welche Flaschen, Gro߬flaschen oder Flaschenbündel enthalten. Sie gilt für Batterie Fahrzeuge, die verdichtete oder verflüssigte Gase sowie deren Gemische enthalten. Sie gilt auch für Acetylen Batterie Fahrzeuge. Diese Europäische Norm gilt nicht für giftige Gase mit einem LC50 Wert kleiner oder gleich 200 ml/m3.
Diese Europäische Norm gilt auch für Batterie Fahrzeuge und MEGCs, die Flaschenbündel enthalten, welche durch eine Sammelleitung miteinander verbunden sind und die vom Batterie Fahrzeug demontiert und einzeln befüllt werden.
Diese Europäische Norm gilt nicht für Batterie Fahrzeuge und MEGCs, die Druckfässer oder Tanks enthalten, oder für Gascontainer mit mehreren Elementen (MEGCs).
Diese Europäische Norm legt keine Anforderungen für das Fahrgestell oder die Antriebseinheit fest.
Diese Europäische Norm enthält keine Anforderungen für die Beförderung auf See.
Diese Europäische Norm ist in erster Linie für andere Industriegase als Flüssiggas (LPG) vorgesehen. Zum Zeitpunkt der Veröffentlichung dieser Europäischen Norm besteht keine Europäische Norm zu speziell für Flüssiggas (LPG) vorgesehenen Batterie Fahrzeugen
Sofern irgendein Widerspruch zwischen dieser Europäischen Norm und jeglicher anwendbaren Rechts-vorschrift besteht, hat immer die Rechtsvorschrift Vorrang.
Bouteilles à gaz transportables - Véhicules-batteries et conteneurs à gaz à éléments multiples (CGEM) - Conception, fabrication, identification et essai
La présente Norme européenne spécifie les exigences relatives à la conception, à la fabrication, à l'identification et aux essais des véhicules-batteries et des conteneurs à gaz à éléments multiples (CGEM) contenant des bouteilles, des tubes ou des cadres de bouteilles. Elle s'applique aux véhicules-batteries contenant du gaz comprimé, du gaz liquéfié et des mélanges de ces gaz. Elle s'applique également aux véhicules-batteries pour acétylène dissous. La présente Norme européenne ne s'applique pas aux gaz toxiques ayant une valeur CL50 inférieure ou égale à 200 ml/m3.
La présente Norme européenne s'applique également aux véhicules-batteries et aux conteneurs à gaz à éléments multiples (CGEM) contenant des cadres de bouteilles reliés par une rampe qui sont démontés du véhicule-batterie et remplis individuellement.
La présente Norme européenne ne s'applique pas aux véhicules-batteries contenant des fûts à pression ou citernes, ni aux conteneurs à gaz à éléments multiples (CGEM).
La présente Norme européenne ne spécifie pas d'exigences relatives au châssis du véhicule ou à l'unité motrice.
La présente Norme européenne ne couvre pas les exigences relatives au transport maritime.
La présente Norme européenne est destinée principalement aux gaz industriels autres que les gaz de pétrole liquéfiés (GPL). À la date de publication de la présente Norme européenne, il n'existe pas de Norme européenne pour des véhicules-batteries dédiés au GPL.
En cas de conflit entre la présente Norme européenne et toute réglementation applicable, la réglementation prévaut toujours.
Premične plinske jeklenke - Baterijska vozila in MEGC - Načrtovanje, izdelava, označevanje in preskušanje
Ta evropski standard določa zahteve za načrtovanje, izdelavo, označevanje in
preskušanje baterijskih vozil in plinskih vsebnikov iz več elementov (MEGC), ki vsebujejo jeklenke, cevi ali sklope jeklenk. Uporablja se za baterijska vozila in plinske vsebnike iz več elementov, ki vsebujejo stisnjen plin, utekočinjen plin ali mešanice teh plinov. Uporablja se tudi za baterijska vozila za raztopine acetilena. Ta evropski standard se ne uporablja za baterijska vozila in plinske vsebnike iz več elementov za strupene pline z vrednostjo LC50, manjšo ali enako 200 ml/m3.
Ta evropski standard se uporablja tudi za baterijska vozila in plinske vsebnike iz več elementov, ki vsebujejo sklope jeklenk,
povezane z zbiralnikom, ki se odstranijo z baterijskega vozila in polnijo individualno.
Ta evropski standard se ne uporablja za baterijska vozila in plinske vsebnike iz več elementov, ki vsebujejo tlačne valje ali rezervoarje.
Ta evropski standard ne določa zahtev za kakovost šasije vozila ali gonilne enote.
Ta evropski standard ne zajema zahtev za pomorski transport.
Ta evropski standard je namenjen predvsem za industrijske pline, razen za utekočinjene naftne pline (LPG). V času objave tega evropskega standarda ne obstaja evropski standard za namenska baterijska vozila LPG.
General Information
- Status
- Published
- Public Enquiry End Date
- 08-Feb-2015
- Publication Date
- 12-Apr-2017
- Technical Committee
- TLP - Pressure vessels
- Current Stage
- 6060 - National Implementation/Publication (Adopted Project)
- Start Date
- 08-Mar-2017
- Due Date
- 13-May-2017
- Completion Date
- 13-Apr-2017
Relations
- Effective Date
- 01-May-2017
- Effective Date
- 01-May-2017
- Effective Date
- 01-Jan-2025
Overview
EN 13807:2017 (CEN) is the European standard for transportable gas cylinders assembled as battery vehicles and multiple-element gas containers (MEGCs). It specifies requirements for the design, manufacture, identification and testing of battery vehicles and MEGCs that contain cylinders, tubes or bundles of cylinders. The standard covers compressed gases, liquefied gases and mixtures, and includes specific provisions for dissolved acetylene (Annex A). It is primarily intended for industrial gases (excluding dedicated LPG battery vehicles) and sits alongside applicable transport regulations (e.g., ADR) - where a conflict exists, the regulation takes precedence.
Key topics and requirements
- Scope and applicability
- Applies to battery vehicles and MEGCs containing cylinders, tubes or bundles; not applicable to units containing pressure drums/tanks, nor to sea transport requirements.
- Excludes very toxic gases with LC50 ≤ 200 ml/m3.
- Design
- Layout and mounting of pressure receptacles, stability of battery vehicles, attachment methods and supports.
- Impact protection and arrangement of valves, fittings and manifolds.
- Requirements for main valves/connections and total assembled units.
- Manufacture and materials
- Fabrication practices, welding/brazing qualifications and assembly controls referenced to relevant welding and brazing standards.
- Identification and marking
- Product, hazard and filling identification; operational marking guidance (informative Annex B).
- Type approval, inspection and testing
- Type approval procedures, design checks, manifold testing, flame resistance and conductivity tests for covers, initial inspection of fully assembled battery vehicles/MEGCs.
- Dissolved acetylene (Annex A)
- Specific material, manifold design and testing requirements (e.g., resistance to acetylene decomposition/detonation, flexible hose rules, ventilation and special safety devices).
- Documentation
- Required records and information to support safe filling, transport and use.
Applications and who uses this standard
- Gas cylinder and MEGC manufacturers designing and building battery vehicles for on-road supply.
- Industrial gas suppliers and distributors who fill, transport and deploy cylinder banks and MEGCs.
- Transport operators and fleet managers implementing compliant gas delivery systems.
- Certification bodies, inspection authorities and testing laboratories conducting type approvals and periodic inspections.
- Safety and engineering teams responsible for on-site gas supply, welding/cutting operations and plant logistics.
Related standards (selected)
- EN ISO 10286 (gas cylinder terminology)
- EN ISO 10297 (cylinder valves)
- EN ISO 10961 (cylinder bundles)
- EN ISO 14113 (hoses for industrial gases)
- EN ISO 15615 (acetylene manifold systems)
- ADR transport regulations (where applicable)
Keywords: EN 13807:2017, battery vehicles, MEGCs, multiple-element gas containers, transportable gas cylinders, design, manufacture, identification, testing, manifolds, dissolved acetylene, industrial gases, type approval.
Frequently Asked Questions
SIST EN 13807:2017 is a standard published by the Slovenian Institute for Standardization (SIST). Its full title is "Transportable gas cylinders - Battery vehicles and multiple-element gas containers (MEGCs) - Design, manufacture, identification and testing". This standard covers: This European Standard specifies the requirements for the design, manufacture, identification and testing of battery vehicles and multiple-element gas containers (MEGCs) containing cylinders, tubes or bundles of cylinders. It is applicable to battery vehicles containing compressed gas, liquefied gas and mixtures thereof. It is also applicable to battery vehicles for dissolved acetylene. This European Standard is not applicable to toxic gases with an LC50 value less than or equal to 200 ml/m3. This European Standard applies also to battery vehicles and MEGCs containing bundles of cylinders connected by a manifold which are dis-assembled from the battery vehicle and filled individually. This European Standard does not apply to battery vehicles and MEGCs containing pressure drums or tanks, or to multi-element gas containers (MEGCs). This European Standard does not specify requirements for the vehicle chassis or motive unit. This European standard does not cover requirements for sea transportation. This European Standard is primarily intended for industrial gases other than Liquefied Petroleum Gases (LPG). At the time of publication of this European Standard, there is no European Standard for dedicated LPG battery vehicles. Where there is any conflict between this European Standard and any applicable regulation, the regulation always takes precedence.
This European Standard specifies the requirements for the design, manufacture, identification and testing of battery vehicles and multiple-element gas containers (MEGCs) containing cylinders, tubes or bundles of cylinders. It is applicable to battery vehicles containing compressed gas, liquefied gas and mixtures thereof. It is also applicable to battery vehicles for dissolved acetylene. This European Standard is not applicable to toxic gases with an LC50 value less than or equal to 200 ml/m3. This European Standard applies also to battery vehicles and MEGCs containing bundles of cylinders connected by a manifold which are dis-assembled from the battery vehicle and filled individually. This European Standard does not apply to battery vehicles and MEGCs containing pressure drums or tanks, or to multi-element gas containers (MEGCs). This European Standard does not specify requirements for the vehicle chassis or motive unit. This European standard does not cover requirements for sea transportation. This European Standard is primarily intended for industrial gases other than Liquefied Petroleum Gases (LPG). At the time of publication of this European Standard, there is no European Standard for dedicated LPG battery vehicles. Where there is any conflict between this European Standard and any applicable regulation, the regulation always takes precedence.
SIST EN 13807:2017 is classified under the following ICS (International Classification for Standards) categories: 23.020.35 - Gas cylinders; 43.020 - Road vehicles in general. The ICS classification helps identify the subject area and facilitates finding related standards.
SIST EN 13807:2017 has the following relationships with other standards: It is inter standard links to SIST EN 13807:2004, SIST EN 13807:2004/AC:2005, kSIST FprEN 13807:2025. Understanding these relationships helps ensure you are using the most current and applicable version of the standard.
SIST EN 13807:2017 is associated with the following European legislation: EU Directives/Regulations: 2008/68/EC; Standardization Mandates: M/086. When a standard is cited in the Official Journal of the European Union, products manufactured in conformity with it benefit from a presumption of conformity with the essential requirements of the corresponding EU directive or regulation.
You can purchase SIST EN 13807:2017 directly from iTeh Standards. The document is available in PDF format and is delivered instantly after payment. Add the standard to your cart and complete the secure checkout process. iTeh Standards is an authorized distributor of SIST standards.
Standards Content (Sample)
2003-01.Slovenski inštitut za standardizacijo. Razmnoževanje celote ali delov tega standarda ni dovoljeno.Ortsbewegliche Gasflaschen - Batterie-Fahrzeuge und Gascontainer mit mehreren Elementen (MEGCs) - Auslegung, Herstellung, Kennzeichnung und PrüfungBouteilles à gaz transportables - Véhicules-batteries et conteneurs à gaz à éléments multiples (CGEM) - Conception, fabrication, identification et essaiTransportable gas cylinders - Battery vehicles and multiple-element gas containers (MEGCs) - Design, manufacture, identification and testing43.020Cestna vozila na splošnoRoad vehicles in general23.020.35Plinske jeklenkeGas cylindersICS:Ta slovenski standard je istoveten z:EN 13807:2017SIST EN 13807:2017en,fr,de01-maj-2017SIST EN 13807:2017SLOVENSKI
STANDARDSIST EN 13807:2004/AC:2005SIST EN 13807:20041DGRPHãþD
EUROPEAN STANDARD NORME EUROPÉENNE EUROPÄISCHE NORM
EN 13807
February
t r s y ICS
t uä r t rä u w Supersedes EN
s u z r yã t r r uEnglish Version
Transportable gas cylinders æ Battery vehicles and manufactureá identification and testing Bouteilles à gaz transportables æ Véhiculesæbatteries et Conceptioná fabricationá identification et essai
Ortsbewegliche Gasflaschen æ BatterieæFahrzeuge und Auslegungá Herstellungá Kennzeichnung und Prüfung This European Standard was approved by CEN on
t s December
t r s xä
egulations which stipulate the conditions for giving this European Standard the status of a national standard without any alterationä Upætoædate lists and bibliographical references concerning such national standards may be obtained on application to the CENæCENELEC Management Centre or to any CEN memberä
translation under the responsibility of a CEN member into its own language and notified to the CENæCENELEC Management Centre has the same status as the official versionsä
CEN members are the national standards bodies of Austriaá Belgiumá Bulgariaá Croatiaá Cyprusá Czech Republicá Denmarká Estoniaá Finlandá Former Yugoslav Republic of Macedoniaá Franceá Germanyá Greeceá Hungaryá Icelandá Irelandá Italyá Latviaá Lithuaniaá Luxembourgá Maltaá Netherlandsá Norwayá Polandá Portugalá Romaniaá Serbiaá Slovakiaá Sloveniaá Spainá Swedená Switzerlandá Turkey and United Kingdomä
EUROPEAN COMMITTEE FOR STANDARDIZATION COMITÉ EUROPÉEN DE NORMALISATION EUROPÄISCHES KOMITEE FÜR NORMUNG
CEN-CENELEC Management Centre:
Avenue Marnix 17,
B-1000 Brussels
t r s y CEN All rights of exploitation in any form and by any means reserved worldwide for CEN national Membersä Refä Noä EN
s u z r yã t r s y ESIST EN 13807:2017
Specific requirements for dissolved acetylene battery vehicles . 17 A.1 General . 17 A.2 Design . 17 A.2.1 Material . 17 A.2.2 Layout . 17 A.2.3 Acetylene cylinders and acetylene bundles of cylinders . 17 SIST EN 13807:2017
Marking of battery vehicles and MEGCs . 22 B.1 General . 22 B.2 Certification marks . 22 B.3 Operational marks . 23 Bibliography . 24
It is used for the dimensioning of the manifold, hoses, valves and fittings. 3.23 working pressure pressure equal to the working pressure stamped on the individual pressure receptacles of the battery vehicle 3.24 maximum filling pressure highest pressure which is allowed in an acetylene battery vehicle manifold during filling Note 1 to entry: It is 25 bar gauge, see A.2.5.3. 3.25 acetylene decomposition blocker safety device, which stops acetylene decomposition 4 Design 4.1 General All pressurized components shall be designed to operate in the temperature range of at least – 20 °C to + 65 °C. Where higher or lower service temperatures are required, any additional requirements shall be agreed between the manufacturer and purchaser. NOTE 1 Local temperature conditions can necessitate higher or lower service temperatures. NOTE 2 Additional requirements can be required for adapted equipment and/or tests. Materials for parts which are in contact with the gas shall be selected in accordance with the relevant European Standards on compatibility (i.e. the EN ISO 11114- series). SIST EN 13807:2017
...
Questions, Comments and Discussion
Ask us and Technical Secretary will try to provide an answer. You can facilitate discussion about the standard in here.
Loading comments...