Tobacco and tobacco products - Vocabulary

ISO 10185:2004 provides terms and definitions used in the production, processing and testing of tobacco and tobacco products.
It contains many definitions from International Standards on tobacco and tobacco products, including oriental tobacco and leaf tobacco.

Tabac et produits du tabac — Vocabulaire

L'ISO 10185:2004 fournit des termes et définitions utilisés dans la production, le traitement et l'analyse du tabac et des produits du tabac.  
Elle contient plusieurs définitions provenant des Normes internationales relatives au tabac et aux produits du tabac. Elle fournit également des termes relatifs au tabac d'Orient et au traitement du tabac en feuilles.

Tobak in tobačni proizvodi - Slovar

General Information

Status
Withdrawn
Public Enquiry End Date
30-Jun-2008
Publication Date
27-May-2008
Withdrawal Date
10-Apr-2016
Current Stage
9900 - Withdrawal (Adopted Project)
Start Date
11-Apr-2016
Due Date
04-May-2016
Completion Date
11-Apr-2016

Relations

Buy Standard

Standard
ISO 10185:2004
English language
12 pages
sale 15% off
Preview
sale 15% off
Preview
Standard
ISO 10185:2008
English and French language
49 pages
sale 10% off
Preview
sale 10% off
Preview
e-Library read for
1 day

Standards Content (Sample)


INTERNATIONAL ISO
STANDARD 10185
NORME
Second edition
Deuxième édition
INTERNATIONALE
2004-05-15
Tobacco and tobacco products —
Vocabulary
Tabac et produits du tabac —
Vocabulaire
Reference number
Numéro de référence
©
ISO 2004
PDF disclaimer
This PDF file may contain embedded typefaces. In accordance with Adobe's licensing policy, this file may be printed or viewed but
shall not be edited unless the typefaces which are embedded are licensed to and installed on the computer performing the editing. In
downloading this file, parties accept therein the responsibility of not infringing Adobe's licensing policy. The ISO Central Secretariat
accepts no liability in this area.
Adobe is a trademark of Adobe Systems Incorporated.
Details of the software products used to create this PDF file can be found in the General Info relative to the file; the PDF-creation
parameters were optimized for printing. Every care has been taken to ensure that the file is suitable for use by ISO member bodies. In
the unlikely event that a problem relating to it is found, please inform the Central Secretariat at the address given below.

PDF – Exonération de responsabilité
Le présent fichier PDF peut contenir des polices de caractères intégrées. Conformément aux conditions de licence d'Adobe, ce fichier
peut être imprimé ou visualisé, mais ne doit pas être modifié à moins que l'ordinateur employé à cet effet ne bénéficie d'une licence
autorisant l'utilisation de ces polices et que celles-ci y soient installées. Lors du téléchargement de ce fichier, les parties concernées
acceptent de fait la responsabilité de ne pas enfreindre les conditions de licence d'Adobe. Le Secrétariat central de l'ISO décline toute
responsabilité en la matière.
Adobe est une marque déposée d'Adobe Systems Incorporated.
Les détails relatifs aux produits logiciels utilisés pour la création du présent fichier PDF sont disponibles dans la rubrique General Info
du fichier; les paramètres de création PDF ont été optimisés pour l'impression. Toutes les mesures ont été prises pour garantir
l'exploitation de ce fichier par les comités membres de l'ISO. Dans le cas peu probable où surviendrait un problème d'utilisation,
veuillez en informer le Secrétariat central à l'adresse donnée ci-dessous.

©  ISO 2004
The reproduction of the terms and definitions contained in this International Standard is permitted in teaching manuals, instruction
booklets, technical publications and journals for strictly educational or implementation purposes. The conditions for such reproduction are:
that no modifications are made to the terms and definitions; that such reproduction is not permitted for dictionaries or similar publications
offered for sale; and that this International Standard is referenced as the source document.
With the sole exceptions noted above, no other part of this publication may be reproduced or utilized in any form or by any means,
electronic or mechanical, including photocopying and microfilm, without permission in writing from either ISO at the address below or
ISO's member body in the country of the requester.
La reproduction des termes et des définitions contenus dans la présente Norme internationale est autorisée dans les manuels
d'enseignement, les modes d'emploi, les publications et revues techniques destinés exclusivement à l'enseignement ou à la mise en
application. Les conditions d'une telle reproduction sont les suivantes: aucune modification n'est apportée aux termes et définitions; la
reproduction n'est pas autorisée dans des dictionnaires ou publications similaires destinés à la vente; la présente Norme internationale
est citée comme document source.
À la seule exception mentionnée ci-dessus, aucune partie de cette publication ne peut être reproduite ni utilisée sous quelque forme que
ce soit et par aucun procédé, électronique ou mécanique, y compris la photocopie et les microfilms, sans l'accord écrit de l'ISO à
l'adresse ci-après ou du comité membre de l'ISO dans le pays du demandeur.
ISO copyright office
Case postale 56 • CH-1211 Geneva 20
Tel. + 41 22 749 01 11
Fax + 41 22 749 09 47
E-mail copyright@iso.org
Web www.iso.org
Published in Switzerland/Publié en Suisse

ii © ISO 2004 – All rights reserved/Tous droits réservés

Foreword
ISO (the International Organization for Standardization) is a worldwide federation of national standards bodies
(ISO member bodies). The work of preparing International Standards is normally carried out through ISO
technical committees. Each member body interested in a subject for which a technical committee has been
established has the right to be represented on that committee. International organizations, governmental and
non-governmental, in liaison with ISO, also take part in the work. ISO collaborates closely with the
International Electrotechnical Commission (IEC) on all matters of electrotechnical standardization.
International Standards are drafted in accordance with the rules given in the ISO/IEC Directives, Part 2.
The main task of technical committees is to prepare International Standards. Draft International Standards
adopted by the technical committees are circulated to the member bodies for voting. Publication as an
International Standard requires approval by at least 75 % of the member bodies casting a vote.
Attention is drawn to the possibility that some of the elements of this document may be the subject of patent
rights. ISO shall not be held responsible for identifying any or all such patent rights.
ISO 10185 was prepared by Technical Committee ISO/TC 126, Tobacco and tobacco products.
This second edition cancels and replaces the first edition (ISO 10185:1993), which has been editorially revised.

Avant-propos
L'ISO (Organisation internationale de normalisation) est une fédération mondiale d'organismes nationaux de
normalisation (comités membres de l'ISO). L'élaboration des Normes internationales est en général confiée
aux comités techniques de l'ISO. Chaque comité membre intéressé par une étude a le droit de faire partie du
comité technique créé à cet effet. Les organisations internationales, gouvernementales et non
gouvernementales, en liaison avec l'ISO participent également aux travaux. L'ISO collabore étroitement avec
la Commission électrotechnique internationale (CEI) en ce qui concerne la normalisation électrotechnique.
Les Normes internationales sont rédigées conformément aux règles données dans les Directives ISO/CEI,
Partie 2.
La tâche principale des comités techniques est d'élaborer les Normes internationales. Les projets de Normes
internationales adoptés par les comités techniques sont soumis aux comités membres pour vote. Leur
publication comme Normes internationales requiert l'approbation de 75 % au moins des comités membres
votants.
L'attention est appelée sur le fait que certains des éléments du présent document peuvent faire l'objet de
droits de propriété intellectuelle ou de droits analogues. L'ISO ne saurait être tenue pour responsable de ne
pas avoir identifié de tels droits de propriété et averti de leur existence.
L'ISO 10185 a été élaborée par le comité technique ISO/TC 126, Tabac et produits du tabac.
Cette deuxième édition annule et remplace la première édition (ISO 10185:1993), laquelle a fait l'objet d'une
révision rédactionnelle.
iv © ISO 2004 – All rights reserved/Tous droits réservés

INTERNATIONAL STANDARD
NORME INTERNATIONALE
Tobacco and tobacco Tabac et produits du tabac —
products — Vocabulary Vocabulaire

Scope Domaine d'application
This International Standard provides terms and La présente Norme internationale fournit des termes
definitions used in the production, processing and et définitions utilisés dans la production, le traitement
testing of tobacco and tobacco products. et l'analyse du tabac et des produits du tabac.
It contains many definitions from International Elle contient un certain nombre de définitions
Standards on tobacco and tobacco products. provenant des Normes internationales relatives au
References to the most recent of these documents tabac et aux produits du tabac. Des références aux
are given where appropriate. documents les plus récents sont données là où elles
s'appliquent.
This International Standard classifies the terms and
definitions under the following headings: La présente Norme internationale classe les termes
et définitions sous les titres suivants:
1 Tobacco and tobacco products other than
Oriental tobacco 1 Tabac et produits du tabac, à l'exception du
1.1 Types of tobacco and tobacco products tabac d'Orient
1.2 Smoking 1.1 Types de tabac et de produits du tabac
1.3 Smoking machines 1.2 Fumage
1.4 Physical characteristics of tobacco products 1.3 Machines à fumer
1.5 Chemical composition of tobacco and tobacco 1.4 Caractéristiques physiques des produits du
products and smoke tabac
1.6 to 1.10  Sampling 1.5 Composition chimique du tabac, des produits
1.11 Testing of tobacco and tobacco products du tabac et de sa fumée
1.6 à 1.10  Échantillonnage
2 Terms related to Oriental tobacco
1.11 Essai sur le tabac et les produits du tabac
2.1 Structure of Oriental leaf tobacco
2.2 Harvesting of Oriental leaf tobacco 2 Termes relatifs au tabac d'Orient
2.3 Baling of Oriental leaf tobacco 2.1 Structure de la feuille du tabac d'Orient
2.2 Récolte du tabac d'Orient en feuilles
3 Terms related to tobacco processing
2.3 Emballage du tabac d'Orient en feuilles
3.1 Leaf tobacco strips
3.2 Threshed tobacco stem content 3 Termes relatifs au traitement du tabac
3.1 Strips de tabac en feuilles
Annex A gives a list of equivalent terms in English
3.2 Teneur en côtes du tabac battu
and French.
L'Annexe A donne une liste de termes équivalents
NOTE The gender of French nouns is indicated after the
en anglais et en français.
term.
NOTE Le genre (m ou f) des noms français est indiqué à
la suite du terme.
1 Tobacco and tobacco products other 1 Tabac et les produits du tabac,
than Oriental tobacco à l'exception du tabac d'Orient

1.1 Types of tobacco and tobacco products 1.1 Types de tabac et de produits du tabac
1.1.1 1.1.1
fine-cut tobacco tabac à rouler, m
FCT TàR
tobacco produced to be used by consumers for tabac fine coupe, m
making their own smoking articles TFC
tabac produit à l'intention des consommateurs qui
[ISO 15592-3:2003, 3.1]
confectionnent leurs propres objets à fumer
[ISO 21147:2003, 3.1]
[ISO 15592-3:2003, 3.1]
[ISO 21147:2003, 3.1]
1.1.2 1.1.2
uncased tobacco tabac non saucé, m
tobacco to which no flavouring material, hydroscopic tabac qui n'a reçu l'ajout d'aucun agent d'aroma-
agent, etc., is added tisation ou agent hygroscopique, etc.
[ISO 6488-1:1997, 3.2] [ISO 6488-1:1997, 3.2]

1.1.3 1.1.3
fine-cut smoking article objet à fumer à base de tabac à rouler, m
FCSA OFTR
article, suitable for smoking, produced by combining objet pouvant être fumé, confectionné en combinant
fine-cut tobacco with a wrapper du tabac à rouler et une enveloppe
[ISO 15592-3:2003, 3.2] [ISO 15592-3:2003, 3.2]
[ISO 21147:2003, 3.2] [ISO 21147:2003, 3.2]

1.1.4 1.1.4
wrapper enveloppe, f
material specially prepared and supplied in a form matériau préparé spécialement et fourni sous une
suitable for enclosing fine-cut tobacco so as to forme adéquate pour renfermer du tabac à rouler de
produce a fine-cut smoking article manière à confectionner un objet à fumer
[ISO 15592-3:2003, 3.3] [ISO 15592-3:2003, 3.3]
[ISO 21147:2003, 3.3] [ISO 21147:2003, 3.3]

1.1.5 1.1.5
monitor test piece éprouvette de contrôle, f
cigarette taken from a batch produced under cigarette provenant d'un lot qui a été élaboré dans
specially strict and controlled manufacturing des conditions de fabrication particulièrement strictes
conditions et contrôlées
NOTE 1 The cigarettes of such a batch show the NOTE 1 Les cigarettes d'un tel lot présentent une
greatest possible homogeneity with regard to their uniformité maximale en ce qui concerne leurs
physical, chemical and smoke yield characteristics. caractéristiques physiques, chimiques et de rendement en
fumée.
[ISO 16055:2001, 4.7]
[ISO 16055:2001, 4.7]
[ISO 15592-3:2003, 3.20]
[ISO 15592-3:2003, 3.20]
NOTE 2 Adapted from ISO 4837:2000, 3.10.
NOTE 2 Adapté de l'ISO 4837:2000, 3.10.
2 © ISO 2004 – All rights reserved/Tous droits réservés

1.2 Smoking 1.2 Fumage
1.2.1 1.2.1
free smoking fumage ouvert, m
condition that exists when the butt end of a cigarette condition réalisée lorsque l'extrémité «bouche» de la
is completely exposed to the atmosphere between cigarette est en communication avec l'atmosphère
successive puffs entre les bouffées successives
[ISO 3308:2000, 3.4] [ISO 3308:2000, 3.4]

1.2.2 1.2.2
restricted smoking fumage fermé, m
condition that exists when the butt end of a cigarette condition réalisée lorsque l'extrémité «bouche» de la
is closed to the atmosphere between successive cigarette est isolée de l'atmosphère entre les
puffs bouffées successives
[ISO 3308:2000, 3.3] [ISO 3308:2000, 3.3]

1.2.3 1.2.3
smoking process opération de fumage, f
use of a smoking machine to smoke cigarettes from utilisation d'une machine à fumer pour fumer des
lighting to final puff cigarettes depuis l'allumage jusqu'à la bouffée finale
[ISO 4387:2000, 3.4] [ISO 4387:2000, 3.4]
NOTE ISO 15592-3 gives the same definition but with the NOTE L'ISO 15592-3 donne la même définition, mais
term “cigarettes” replaced by “fine-cut smoking articles”. avec les termes «des cigarettes» remplacés par «un objet
à fumer à base de tabac à rouler».

1.2.4 1.2.4
mainstream smoke fumée du courant principal, f
all smoke which leaves the butt end of a cigarette totalité de la fumée quittant l'extrémité «bouche» de
during the smoking process la cigarette pendant le fumage
[ISO 3308:2000, 3.20] [ISO 3308:2000, 3.20]

1.2.5 1.2.5
sidestream smoke fumée du courant secondaire, f
all smoke which leaves a cigarette during the totalité de la fumée quittant la cigarette pendant le
smoking process other than from the butt end fumage, autrement que par l'extrémité «bouche» de
la cigarette
[ISO 3308:2000, 3.21]
[ISO 3308:2000, 3.21]
1.2.6 1.2.6
smoulder stream smoke fumée du courant spontané, f
all smoke which leaves th
...


SLOVENSKI STANDARD
01-julij-2008
1DGRPHãþD
SIST ISO 10185:1999
7REDNLQWREDþQLSURL]YRGL6ORYDU
Tobacco and tobacco products - Vocabulary
Ta slovenski standard je istoveten z: ISO 10185:2004
ICS:
01.040.65 Kmetijstvo (Slovarji) Agriculture (Vocabularies)
65.160 7REDNWREDþQLL]GHONLLQ Tobacco, tobacco products
RSUHPD and related equipment
2003-01.Slovenski inštitut za standardizacijo. Razmnoževanje celote ali delov tega standarda ni dovoljeno.

INTERNATIONAL ISO
STANDARD 10185
NORME
Second edition
Deuxième édition
INTERNATIONALE
2004-05-15
Tobacco and tobacco products —
Vocabulary
Tabac et produits du tabac —
Vocabulaire
Reference number
Numéro de référence
©
ISO 2004
PDF disclaimer
This PDF file may contain embedded typefaces. In accordance with Adobe's licensing policy, this file may be printed or viewed but
shall not be edited unless the typefaces which are embedded are licensed to and installed on the computer performing the editing. In
downloading this file, parties accept therein the responsibility of not infringing Adobe's licensing policy. The ISO Central Secretariat
accepts no liability in this area.
Adobe is a trademark of Adobe Systems Incorporated.
Details of the software products used to create this PDF file can be found in the General Info relative to the file; the PDF-creation
parameters were optimized for printing. Every care has been taken to ensure that the file is suitable for use by ISO member bodies. In
the unlikely event that a problem relating to it is found, please inform the Central Secretariat at the address given below.

PDF – Exonération de responsabilité
Le présent fichier PDF peut contenir des polices de caractères intégrées. Conformément aux conditions de licence d'Adobe, ce fichier
peut être imprimé ou visualisé, mais ne doit pas être modifié à moins que l'ordinateur employé à cet effet ne bénéficie d'une licence
autorisant l'utilisation de ces polices et que celles-ci y soient installées. Lors du téléchargement de ce fichier, les parties concernées
acceptent de fait la responsabilité de ne pas enfreindre les conditions de licence d'Adobe. Le Secrétariat central de l'ISO décline toute
responsabilité en la matière.
Adobe est une marque déposée d'Adobe Systems Incorporated.
Les détails relatifs aux produits logiciels utilisés pour la création du présent fichier PDF sont disponibles dans la rubrique General Info
du fichier; les paramètres de création PDF ont été optimisés pour l'impression. Toutes les mesures ont été prises pour garantir
l'exploitation de ce fichier par les comités membres de l'ISO. Dans le cas peu probable où surviendrait un problème d'utilisation,
veuillez en informer le Secrétariat central à l'adresse donnée ci-dessous.

©  ISO 2004
The reproduction of the terms and definitions contained in this International Standard is permitted in teaching manuals, instruction
booklets, technical publications and journals for strictly educational or implementation purposes. The conditions for such reproduction are:
that no modifications are made to the terms and definitions; that such reproduction is not permitted for dictionaries or similar publications
offered for sale; and that this International Standard is referenced as the source document.
With the sole exceptions noted above, no other part of this publication may be reproduced or utilized in any form or by any means,
electronic or mechanical, including photocopying and microfilm, without permission in writing from either ISO at the address below or
ISO's member body in the country of the requester.
La reproduction des termes et des définitions contenus dans la présente Norme internationale est autorisée dans les manuels
d'enseignement, les modes d'emploi, les publications et revues techniques destinés exclusivement à l'enseignement ou à la mise en
application. Les conditions d'une telle reproduction sont les suivantes: aucune modification n'est apportée aux termes et définitions; la
reproduction n'est pas autorisée dans des dictionnaires ou publications similaires destinés à la vente; la présente Norme internationale
est citée comme document source.
À la seule exception mentionnée ci-dessus, aucune partie de cette publication ne peut être reproduite ni utilisée sous quelque forme que
ce soit et par aucun procédé, électronique ou mécanique, y compris la photocopie et les microfilms, sans l'accord écrit de l'ISO à
l'adresse ci-après ou du comité membre de l'ISO dans le pays du demandeur.
ISO copyright office
Case postale 56 • CH-1211 Geneva 20
Tel. + 41 22 749 01 11
Fax + 41 22 749 09 47
E-mail copyright@iso.org
Web www.iso.org
Published in Switzerland/Publié en Suisse

ii © ISO 2004 – All rights reserved/Tous droits réservés

Foreword
ISO (the International Organization for Standardization) is a worldwide federation of national standards bodies
(ISO member bodies). The work of preparing International Standards is normally carried out through ISO
technical committees. Each member body interested in a subject for which a technical committee has been
established has the right to be represented on that committee. International organizations, governmental and
non-governmental, in liaison with ISO, also take part in the work. ISO collaborates closely with the
International Electrotechnical Commission (IEC) on all matters of electrotechnical standardization.
International Standards are drafted in accordance with the rules given in the ISO/IEC Directives, Part 2.
The main task of technical committees is to prepare International Standards. Draft International Standards
adopted by the technical committees are circulated to the member bodies for voting. Publication as an
International Standard requires approval by at least 75 % of the member bodies casting a vote.
Attention is drawn to the possibility that some of the elements of this document may be the subject of patent
rights. ISO shall not be held responsible for identifying any or all such patent rights.
ISO 10185 was prepared by Technical Committee ISO/TC 126, Tobacco and tobacco products.
This second edition cancels and replaces the first edition (ISO 10185:1993), which has been editorially revised.

Avant-propos
L'ISO (Organisation internationale de normalisation) est une fédération mondiale d'organismes nationaux de
normalisation (comités membres de l'ISO). L'élaboration des Normes internationales est en général confiée
aux comités techniques de l'ISO. Chaque comité membre intéressé par une étude a le droit de faire partie du
comité technique créé à cet effet. Les organisations internationales, gouvernementales et non
gouvernementales, en liaison avec l'ISO participent également aux travaux. L'ISO collabore étroitement avec
la Commission électrotechnique internationale (CEI) en ce qui concerne la normalisation électrotechnique.
Les Normes internationales sont rédigées conformément aux règles données dans les Directives ISO/CEI,
Partie 2.
La tâche principale des comités techniques est d'élaborer les Normes internationales. Les projets de Normes
internationales adoptés par les comités techniques sont soumis aux comités membres pour vote. Leur
publication comme Normes internationales requiert l'approbation de 75 % au moins des comités membres
votants.
L'attention est appelée sur le fait que certains des éléments du présent document peuvent faire l'objet de
droits de propriété intellectuelle ou de droits analogues. L'ISO ne saurait être tenue pour responsable de ne
pas avoir identifié de tels droits de propriété et averti de leur existence.
L'ISO 10185 a été élaborée par le comité technique ISO/TC 126, Tabac et produits du tabac.
Cette deuxième édition annule et remplace la première édition (ISO 10185:1993), laquelle a fait l'objet d'une
révision rédactionnelle.
iv © ISO 2004 – All rights reserved/Tous droits réservés

INTERNATIONAL STANDARD
NORME INTERNATIONALE
Tobacco and tobacco Tabac et produits du tabac —
products — Vocabulary Vocabulaire

Scope Domaine d'application
This International Standard provides terms and La présente Norme internationale fournit des termes
definitions used in the production, processing and et définitions utilisés dans la production, le traitement
testing of tobacco and tobacco products. et l'analyse du tabac et des produits du tabac.
It contains many definitions from International Elle contient un certain nombre de définitions
Standards on tobacco and tobacco products. provenant des Normes internationales relatives au
References to the most recent of these documents tabac et aux produits du tabac. Des références aux
are given where appropriate. documents les plus récents sont données là où elles
s'appliquent.
This International Standard classifies the terms and
definitions under the following headings: La présente Norme internationale classe les termes
et définitions sous les titres suivants:
1 Tobacco and tobacco products other than
Oriental tobacco 1 Tabac et produits du tabac, à l'exception du
1.1 Types of tobacco and tobacco products tabac d'Orient
1.2 Smoking 1.1 Types de tabac et de produits du tabac
1.3 Smoking machines 1.2 Fumage
1.4 Physical characteristics of tobacco products 1.3 Machines à fumer
1.5 Chemical composition of tobacco and tobacco 1.4 Caractéristiques physiques des produits du
products and smoke tabac
1.6 to 1.10  Sampling 1.5 Composition chimique du tabac, des produits
1.11 Testing of tobacco and tobacco products du tabac et de sa fumée
1.6 à 1.10  Échantillonnage
2 Terms related to Oriental tobacco
1.11 Essai sur le tabac et les produits du tabac
2.1 Structure of Oriental leaf tobacco
2.2 Harvesting of Oriental leaf tobacco 2 Termes relatifs au tabac d'Orient
2.3 Baling of Oriental leaf tobacco 2.1 Structure de la feuille du tabac d'Orient
2.2 Récolte du tabac d'Orient en feuilles
3 Terms related to tobacco processing
2.3 Emballage du tabac d'Orient en feuilles
3.1 Leaf tobacco strips
3.2 Threshed tobacco stem content 3 Termes relatifs au traitement du tabac
3.1 Strips de tabac en feuilles
Annex A gives a list of equivalent terms in English
3.2 Teneur en côtes du tabac battu
and French.
L'Annexe A donne une liste de termes équivalents
NOTE The gender of French nouns is indicated after the
en anglais et en français.
term.
NOTE Le genre (m ou f) des noms français est indiqué à
la suite du terme.
1 Tobacco and tobacco products other 1 Tabac et les produits du tabac,
than Oriental tobacco à l'exception du tabac d'Orient

1.1 Types of tobacco and tobacco products 1.1 Types de tabac et de produits du tabac
1.1.1 1.1.1
fine-cut tobacco tabac à rouler, m
FCT TàR
tobacco produced to be used by consumers for tabac fine coupe, m
making their own smoking articles TFC
tabac produit à l'intention des consommateurs qui
[ISO 15592-3:2003, 3.1]
confectionnent leurs propres objets à fumer
[ISO 21147:2003, 3.1]
[ISO 15592-3:2003, 3.1]
[ISO 21147:2003, 3.1]
1.1.2 1.1.2
uncased tobacco tabac non saucé, m
tobacco to which no flavouring material, hydroscopic tabac qui n'a reçu l'ajout d'aucun agent d'aroma-
agent, etc., is added tisation ou agent hygroscopique, etc.
[ISO 6488-1:1997, 3.2] [ISO 6488-1:1997, 3.2]

1.1.3 1.1.3
fine-cut smoking article objet à fumer à base de tabac à rouler, m
FCSA OFTR
article, suitable for smoking, produced by combining objet pouvant être fumé, confectionné en combinant
fine-cut tobacco with a wrapper du tabac à rouler et une enveloppe
[ISO 15592-3:2003, 3.2] [ISO 15592-3:2003, 3.2]
[ISO 21147:2003, 3.2] [ISO 21147:2003, 3.2]

1.1.4 1.1.4
wrapper enveloppe, f
material specially prepared and supplied in a form matériau préparé spécialement et fourni sous une
suitable for enclosing fine-cut tobacco so as to forme adéquate pour renfermer du tabac à rouler de
produce a fine-cut smoking article manière à confectionner un objet à fumer
[ISO 15592-3:2003, 3.3] [ISO 15592-3:2003, 3.3]
[ISO 21147:2003, 3.3] [ISO 21147:2003, 3.3]

1.1.5 1.1.5
monitor test piece éprouvette de contrôle, f
cigarette taken from a batch produced under cigarette provenant d'un lot qui a été élaboré dans
specially strict and controlled manufacturing des conditions de fabrication particulièrement strictes
conditions et contrôlées
NOTE 1 The cigarettes of such a batch show the NOTE 1 Les cigarettes d'un tel lot présentent une
greatest possible homogeneity with regard to their uniformité maximale en ce qui concerne leurs
physical, chemical and smoke yield characteristics. caractéristiques physiques, chimiques et de rendement en
fumée.
[ISO 16055:2001, 4.7]
[ISO 16055:2001, 4.7]
[ISO 15592-3:2003, 3.20]
[ISO 15592-3:2003, 3.20]
NOTE 2 Adapted from ISO 4837:2000, 3.10.
NOTE 2 Adapté de l'ISO 4837:2000, 3.10.
2 © ISO 2004 – All rights reserved/Tous droits réservés

1.2 Smoking 1.2 Fumage
1.2.1 1.2.1
free smoking fumage ouvert, m
condition that exists when the butt end of a cigarette condition réalisée lorsque l'extrémité «bouche» de la
is completely exposed to the atmosphere between cigarette est en communication avec l'atmosphère
successive puffs entre les bouffées successives
[ISO 3308:2000, 3.4] [ISO 3308:2000, 3.4]

1.2.2 1.2.2
restricted smoking fumage fermé, m
condition that exists when the butt end of a cigarette condition réalisée lorsque l'extrémité «bouche» de la
is closed to the atmosphere between successive cigarette est isolée de l'atmosphère entre les
puffs bouffées successives
[ISO 3308:2000, 3.3] [ISO 3308:2000, 3.3]

1.2.3 1.2.3
smoking process opération de fumage, f
use of a smoking machine to smoke cigarettes from utilisation d'une machine à fumer pour fumer des
lighting to final puff cigarettes depuis l'allumage jusqu'à la bouffée finale
[ISO 4387:2000, 3.4] [ISO 4387:2000, 3.4]
NOTE ISO 15592-3 gives the same definition but with the NOTE L'ISO 15592-3 donne la même définition, mais
term “cigarettes” replaced by “fine-cut smoking articles”. avec les termes «des cigarettes» remplacés par «un objet
à fumer à base de tabac à rouler».

1.2.4 1.2.4
mainstream smoke fumée du courant principal, f
all smoke which leaves the butt end of a cigarette tota
...

Questions, Comments and Discussion

Ask us and Technical Secretary will try to provide an answer. You can facilitate discussion about the standard in here.