iTeh Standards logo
EURUSD
Your shopping cart is empty.
SIST

SIST IEC 60050-300:2008/A1:2017

(Amendment)

Amendment 1 - International Electrotechnical Vocabulary - Electrical and electronic measurements and measuring instruments - Part 312: General terms relating to electrical measurements

Amendment 1 - International Electrotechnical Vocabulary - Electrical and electronic measurements and measuring instruments - Part 312: General terms relating to electrical measurements

Amendement 1 - Vocabulaire Electrotechnique International - Mesures et appareils de mesure électriques et électroniques - Partie 312: Termes généraux concernant les mesures électriques

Mednarodni elektrotehniški slovar - Električne in elektronske meritve in merilni instrumenti - 312. del: Splošni izrazi, povezani z električnimi meritvami - Dopolnilo A1

General Information

Status
Published
Publication Date
13-Mar-2017
ICS
01.040.17 - Metrology and measurement. Physical phenomena (Vocabularies)
17.220.20 - Measurement of electrical and magnetic quantities
29.020 - Electrical engineering in general
Technical Committee
TRM - Terminology
Current Stage
6060 - National Implementation/Publication (Adopted Project)
Start Date
21-Feb-2017
Due Date
28-Apr-2017
Completion Date
14-Mar-2017
Ref Project
IEC 60050-300-am1 - Amendment 1 - International Electrotechnical Vocabulary - Electrical and electronic measurements and measuring instruments - Part 312: General terms relating to electrical measurements

Relations

Amends
SIST IEC 60050-300:2008 - International Electrotechnical Vocabulary - Electrical and electronic measurements and measuring instruments - Part 311: General terms relating to measurements - Part 312: General terms relating to electrical measurements - Part 313: Types of electrical measuring instruments - Part 314: Specific terms according to the type of instrument
Effective Date
06-Mar-2017
SIST IEC 60050-300:2008/A1:2017SIST IEC 60050-300:2008/A1:2017
PreviousNext
Amendment
SIST IEC 60050-300:2008/A1:2017
English and French language
3 pages
sale 10% off
Preview
sale 10% off
Preview
e-Library read for
1 day

Standards Content (Sample)


SLOVENSKI STANDARD
01-april-2017
0HGQDURGQLHOHNWURWHKQLãNLVORYDU(OHNWULþQHLQHOHNWURQVNHPHULWYHLQPHULOQL
LQVWUXPHQWLGHO6SORãQLL]UD]LSRYH]DQL]HOHNWULþQLPLPHULWYDPL'RSROQLOR
$
Amendment 1 - International Electrotechnical Vocabulary - Electrical and electronic
measurements and measuring instruments - Part 312: General terms relating to electrical
measurements
Amendement 1 - Vocabulaire Electrotechnique International - Mesures et appareils de
mesure électriques et électroniques - Partie 312: Termes généraux concernant les
mesures électriques
Ta slovenski standard je istoveten z: IEC 60050-300-am1
ICS:
01.040.17 Meroslovje in merjenje. Metrology and measurement.
Fizikalni pojavi (Slovarji) Physical phenomena
(Vocabularies)
17.220.20 0HUMHQMHHOHNWULþQLKLQ Measurement of electrical
PDJQHWQLKYHOLþLQ and magnetic quantities
29.020 Elektrotehnika na splošno Electrical engineering in
general
2003-01.Slovenski inštitut za standardizacijo. Razmnoževanje celote ali delov tega standarda ni dovoljeno.

IEC 60050-300 ®
Edition 1.0 2015-02
INTERNATIONAL
STANDARD
NORME
INTERNATIONALE
HO RIZONTAL STANDARD
NO RME HORIZONTALE
AMENDMENT 1
AMENDEMENT 1
International Electrotechnical Vocabulary –

Electrical and electronic measurements and measuring instruments –

Part 312: General terms relating to electrical measurements

Vocabulaire Electrotechnique International –

Mesures et appareils de mesure électriques et électroniques –

Partie 312: Termes généraux concernant les mesures électriques

INTERNATIONAL
ELECTROTECHNICAL
COMMISSION
COMMISSION
ELECTROTECHNIQUE
INTERNATIONALE
ICS 01.040.17; 17.220.20 ISBN 978-2-8322-2288-1

SIST IEC 60050-300:20
...

Questions, Comments and Discussion

Ask us and Technical Secretary will try to provide an answer. You can facilitate discussion about the standard in here.

Loading comments...

This May Also Interest You

SIST
SIST IEC 60050-300:2008/A2:2017(Amendment)
Amendment 1 - International electrotechnical vocabulary - Electrical and electronic measurements and measuring instruments - Part 314: Specific terms according to the type of instrument
IEC 60050-300:2001/AMD2:2016
  • Standard
    2 pages
    English and French language
    sale 15% off
  • Amendment
    3 pages
    English and French language
    sale 10% off
    e-Library read for
    1 day
SIST
SIST IEC 60050(321):2000(Main)
International Electrotechnical Vocabulary. Chapter 321: Instrument transformers
IEC 60050-221:1990

Replaces IEC 60050(901) (1973), 60050(901A) (1975) and 60050(901B) (1978). It has the status of a horizontal standard in accordance with IEC Guide 108.

  • Standard
    21 pages
    English, French and Russian language
    sale 10% off
    e-Library read for
    1 day
  • Standard – translation
    24 pages
    Slovenian language
    sale 10% off
    e-Library read for
    1 day
SIST
SIST IEC 60050-300:2008(Main)
International Electrotechnical Vocabulary - Electrical and electronic measurements and measuring instruments - Part 311: General terms relating to measurements - Part 312: General terms relating to electrical measurements - Part 313: Types of electrical measuring instruments - Part 314: Specific terms according to the type of instrument
IEC 60050-300

IEC 60050-300 vsebuje splošne izraze povezane z meritvami, električnimi meritvami in izraze, povezane s tipom instrumenta. V teh delih mednarodnega slovarja so izrazi in definicije podani v francoskem in angleškem jeziku, poleg teh pa so navedeni tudi izrazi v kitajskem (cn), nemškem (de), španskem (es), japonskem (ja), poljskem (pl), portugalskem (pt) in švedskem(sv) jeziku.

  • Standard
    247 pages
    English and French language
    sale 10% off
    e-Library read for
    1 day
  • Standard – translation
    92 pages
    Slovenian language
    sale 10% off
    e-Library read for
    1 day
SIST
SIST-TS CLC IEC/TS 62271-320:2026(Main)
High-voltage switchgear and controlgear - Part 320: Environmental aspects and life cycle assessment rules for high-voltage switchgear and controlgear (IEC/TS 62271-320:2025)
CLC IEC/TS 62271-320:2025

This part of IEC 62271 provides guidance to suppliers, manufacturers, users, and waste operators of high-voltage switchgear and controlgear as well as their assemblies having a rated voltage above 1 kV AC and 1,5 kV DC, together with their associated auxiliary equipment, on environmentally conscious design, and on assessing environmental impacts when used in systems. This document also gives guidance on effective communication of environmental information throughout the entire life cycle.
This document provides guidance on the process and general aspects to select UN sustainable development goals (UN sustainable development goals (SDG)), especially those dealing with health and environmental impacts and their assessments, represented respectively by:
• SDG 3-Good Health and Well-being;
• SDG 6-Clean Water and Sanitation;
• SDG 7-Affordable and Clean Energy;
• SDG 12-Responsible Consumption and Production;
• SDG 13-Climate Action;
• SDG 14-Life Below Water;
• SDG 15-Life on Land.
This document gives guidance on the process and general aspects to implement environmentally conscious product design (ECD) principles, as given in IEC 62430, essential
for high-voltage electrical power equipment and power control equipment.
This document gives guidance on executing the life cycle assessment (LCA) based on product category rules (PCR) in accordance with IEC 63366, ISO 14040 and ISO 14044 and on applying the Type III environmental declaration in accordance with ISO 14025, both for high-voltage switchgear and controlgear. This guidance provides standardized product specific rules (PSR) summarized as follows:
1) Common rules for the LCA process describing functional units, system boundaries, life cycle inventory analysis, scenarios, environmental impact categories;
2) Common rules for communicating information about the presence of regulated substances and the materials contained in the product, according to IEC 62474;
3) Common rules for communicating information about the end-of-life treatment of the product including material efficiency.
This document does not address the environmental declaration programme, however it can be used by program operators.
This document focuses on describing the LCA process referring to the functional unit, system boundary, scenarios, etc.
Owing to variability of influencing factors, such as flows, allocations, not balanced and timestable energy mix under different programmes, equipment customization, durability related to environmental conditions, it is not possible to compare two similar high-voltage switchgear and controlgear analysed in different contexts.
This document does not address by-products from arcing which are generated in sufficiently small quantities such that their environmental impact can be neglected. Any by-product generated by arcing during the use of equipment is strongly dependent on operating conditions and cannot a priori be qualified nor quantified. However, they are not expected to be released in air and will be managed at end-of-life by a dedicated process.
EXAMPLE
During the use of high-voltage switchgear and controlgear the handlings of normally arced gas are covered by IEC 62271-4. When the volume of gaseous by-product is below 1 % of normally arced gas, it is not considered compared to the cut-off rules specified in this document. The scenarios related to the system boundary do not take into account leakages from failures except if an agreement is reached on this between user and manufacturer (see Table 7, item h).
Power transformers, low-voltage switchgear and controlgear, and the interconnections with such equipment are not covered by this document. Therefore, assemblies according to IEC 62271-202 or IEC 62271-212 comprising any of the above equipment are not within the scope of this document.
This document supports material efficiency for circular economy. However, one of the major issues related to remanufacturing is the consideration of used parts

  • Technical specification
    112 pages
    English language
    sale 10% off
    e-Library read for
    1 day
SIST
SIST EN 12082-2:2026(Main)
Railway applications - Axleboxes - Part 2: Deployment Procedure
EN 12082-2:2025

This document is a part of a package of standards: EN 12080, EN 12081, EN 12082-1 and EN 12082-2.
This document specifies the principles and methods for deployment of the system of axlebox rolling bearing(s), housing, seal(s) and grease, required for reliable operation of trains on European networks.
It covers the conformity assessment with respect to design requirements on the rolling bearing(s) according EN 12080 and grease according EN 12081 as well as the performance of (rig) tests according to EN 12082-1. This document is historically developed for outboard applications with rotating inner rings, but can be used for vehicles with inboard bearing arrangements with rotation inner rings.
The present document describes the complete deployment procedure for new axleboxes and it specifies the necessary type and extent of testing. For certain cases and based on a documented risk assessment, a reduced deployment procedure is described.
This document only applies to axleboxes equipped with rolling bearings and greases according to EN 12080 and EN 12081.
It is not within the scope of EN 12082-2 to specify the technical details of the testing procedures, these are covered by EN 12082-1.
It is not within the scope of EN 12082-2 to define the validation procedure of box housings, sleeves or coves from a structural point of view. The relevance of these parts in the scope of this document is limited to the interaction with the axle box rolling bearing with respect to the required service.

  • Standard
    18 pages
    English language
    sale 10% off
    e-Library read for
    1 day
SIST
SIST EN IEC 62841-2-22:2026/A11:2026(Amendment)
Electric motor-operated hand-held tools, transportable tools and lawn and garden machinery - Safety - Part 2-22: Particular requirements for hand-held cut-off machines
EN IEC 62841-2-22:2025/A11:2025
  • Amendment
    12 pages
    English language
    sale 10% off
    e-Library read for
    1 day
SIST
SIST EN 12080:2026(Main)
Railway applications - Axleboxes - Rolling bearings
EN 12080:2025

This document is a part of a package of standards: EN 12080, EN 12081, EN 12082-1 and EN 12082-2. This document specifies the quality parameters of axlebox rolling bearings supporting the load of the vehicle, required for reliable operation of trains on European networks. It covers metallurgical and material properties as well as geometric and dimensional characteristics. It also specifies methods for quality assurance and non-destructive testing of the products.

  • Standard
    51 pages
    English language
    sale 10% off
    e-Library read for
    1 day
SIST
SIST EN 15365:2026(Main)
Advanced technical ceramics - Mechanical properties of ceramic fibres at high temperature in a non-reactive environment - Determination of creep behaviour by the cold grip method
EN 15365:2025

This document specifies the conditions for the determination of the tensile creep deformation and failure behaviour of single filaments of ceramic fibres at high temperature and under test conditions that prevent changes to the material as a result of chemical reaction with the test environment.
This document applies to continuous ceramic filaments taken from tows, yarns, braids and knittings, which have strains to fracture less than or equal to 5 %.

  • Standard
    17 pages
    English language
    sale 10% off
    e-Library read for
    1 day
SIST
SIST EN 10342:2026(Main)
Magnetic materials - Classification of surface insulations of electrical steel sheet, strip and laminations
EN 10342:2025

This document establishes a classification of surface insulations for electrical steel sheet, strip and laminations according to their general composition, relative insulating ability and function.
These surface insulations are either oxide layers or applied coatings.
The purpose of this classification is to create a nomenclature for the various types of surface insulations and to assist users of surface insulations by providing general information about the chemical nature and use of the surface insulations.
It is not the intent of this classification to specify insulation requirements in terms of specific values of surface insulation resistance. Such requirements are to be agreed between the purchaser and the steel producer, where applicable.
The classification is to be used in conjunction with the various specifications for cold rolled electrical steels (see Clause 2).

  • Standard
    8 pages
    English language
    sale 10% off
    e-Library read for
    1 day
SIST
SIST EN 4700-003:2026(Main)
Aerospace series - Steel and heat-resisting alloys - Wrought products - Technical specification - Part 003: Tubes
EN 4700-003:2025

This document specifies the requirements for the ordering, manufacture, testing, inspection and delivery of steel and heat-resisting alloy tubes. It is presupposed to be applied when referred to and in conjunction with the EN material standard unless otherwise specified on the drawing, order or inspection schedule.

  • Standard
    32 pages
    English language
    sale 10% off
    e-Library read for
    1 day